bcm2835_peripherals: add rollup device for bcm2835 peripherals

This device maintains all the non-CPU peripherals on bcm2835 (Pi1)
which are also present on bcm2836 (Pi2). It also implements the
private address spaces used for DMA and mailboxes.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

2 files changed, 170 insertions, 0 deletions

diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
new file mode 100644
index 0000000000..5d888dca53
--- /dev/null
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -0,0 +1,42 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
+ *
+ * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
+ * Written by Andrew Baumann
+ *
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#ifndef BCM2835_PERIPHERALS_H
+#define BCM2835_PERIPHERALS_H
+
+#include "qemu-common.h"
+#include "exec/address-spaces.h"
+#include "hw/sysbus.h"
+#include "hw/intc/bcm2835_ic.h"
+#include "hw/misc/bcm2835_property.h"
+#include "hw/misc/bcm2835_mbox.h"
+#include "hw/sd/sdhci.h"
+
+#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
+#define BCM2835_PERIPHERALS(obj) \
+    OBJECT_CHECK(BCM2835PeripheralState, (obj), TYPE_BCM2835_PERIPHERALS)
+
+typedef struct BCM2835PeripheralState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+    /*< public >*/
+
+    MemoryRegion peri_mr, peri_mr_alias, gpu_bus_mr, mbox_mr;
+    MemoryRegion ram_alias[4];
+    qemu_irq irq, fiq;
+
+    SysBusDevice *uart0;
+    BCM2835ICState ic;
+    BCM2835PropertyState property;
+    BCM2835MboxState mboxes;
+    SDHCIState sdhci;
+} BCM2835PeripheralState;
+
+#endif /* BCM2835_PERIPHERALS_H */
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
new file mode 100644
index 0000000000..6467e88ae6
--- /dev/null
+++ b/include/hw/arm/raspi_platform.h
@@ -0,0 +1,128 @@
+/*
+ * bcm2708 aka bcm2835/2836 aka Raspberry Pi/Pi2 SoC platform defines
+ *
+ * These definitions are derived from those in Raspbian Linux at
+ * arch/arm/mach-{bcm2708,bcm2709}/include/mach/platform.h
+ * where they carry the following notice:
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define MCORE_OFFSET            0x0000   /* Fake frame buffer device
+                                          * (the multicore sync block) */
+#define IC0_OFFSET              0x2000
+#define ST_OFFSET               0x3000   /* System Timer */
+#define MPHI_OFFSET             0x6000   /* Message-based Parallel Host Intf. */
+#define DMA_OFFSET              0x7000   /* DMA controller, channels 0-14 */
+#define ARM_OFFSET              0xB000   /* BCM2708 ARM control block */
+#define ARMCTRL_OFFSET          (ARM_OFFSET + 0x000)
+#define ARMCTRL_IC_OFFSET       (ARM_OFFSET + 0x200) /* Interrupt controller */
+#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */
+#define ARMCTRL_0_SBM_OFFSET    (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores
+                                                      * Doorbells & Mailboxes */
+#define PM_OFFSET               0x100000 /* Power Management, Reset controller
+                                          * and Watchdog registers */
+#define PCM_CLOCK_OFFSET        0x101098
+#define RNG_OFFSET              0x104000
+#define GPIO_OFFSET             0x200000
+#define UART0_OFFSET            0x201000
+#define MMCI0_OFFSET            0x202000
+#define I2S_OFFSET              0x203000
+#define SPI0_OFFSET             0x204000
+#define BSC0_OFFSET             0x205000 /* BSC0 I2C/TWI */
+#define UART1_OFFSET            0x215000
+#define EMMC_OFFSET             0x300000
+#define SMI_OFFSET              0x600000
+#define BSC1_OFFSET             0x804000 /* BSC1 I2C/TWI */
+#define USB_OFFSET              0x980000 /* DTC_OTG USB controller */
+#define DMA15_OFFSET            0xE05000 /* DMA controller, channel 15 */
+
+/* GPU interrupts */
+#define INTERRUPT_TIMER0               0
+#define INTERRUPT_TIMER1               1
+#define INTERRUPT_TIMER2               2
+#define INTERRUPT_TIMER3               3
+#define INTERRUPT_CODEC0               4
+#define INTERRUPT_CODEC1               5
+#define INTERRUPT_CODEC2               6
+#define INTERRUPT_JPEG                 7
+#define INTERRUPT_ISP                  8
+#define INTERRUPT_USB                  9
+#define INTERRUPT_3D                   10
+#define INTERRUPT_TRANSPOSER           11
+#define INTERRUPT_MULTICORESYNC0       12
+#define INTERRUPT_MULTICORESYNC1       13
+#define INTERRUPT_MULTICORESYNC2       14
+#define INTERRUPT_MULTICORESYNC3       15
+#define INTERRUPT_DMA0                 16
+#define INTERRUPT_DMA1                 17
+#define INTERRUPT_DMA2                 18
+#define INTERRUPT_DMA3                 19
+#define INTERRUPT_DMA4                 20
+#define INTERRUPT_DMA5                 21
+#define INTERRUPT_DMA6                 22
+#define INTERRUPT_DMA7                 23
+#define INTERRUPT_DMA8                 24
+#define INTERRUPT_DMA9                 25
+#define INTERRUPT_DMA10                26
+#define INTERRUPT_DMA11                27
+#define INTERRUPT_DMA12                28
+#define INTERRUPT_AUX                  29
+#define INTERRUPT_ARM                  30
+#define INTERRUPT_VPUDMA               31
+#define INTERRUPT_HOSTPORT             32
+#define INTERRUPT_VIDEOSCALER          33
+#define INTERRUPT_CCP2TX               34
+#define INTERRUPT_SDC                  35
+#define INTERRUPT_DSI0                 36
+#define INTERRUPT_AVE                  37
+#define INTERRUPT_CAM0                 38
+#define INTERRUPT_CAM1                 39
+#define INTERRUPT_HDMI0                40
+#define INTERRUPT_HDMI1                41
+#define INTERRUPT_PIXELVALVE1          42
+#define INTERRUPT_I2CSPISLV            43
+#define INTERRUPT_DSI1                 44
+#define INTERRUPT_PWA0                 45
+#define INTERRUPT_PWA1                 46
+#define INTERRUPT_CPR                  47
+#define INTERRUPT_SMI                  48
+#define INTERRUPT_GPIO0                49
+#define INTERRUPT_GPIO1                50
+#define INTERRUPT_GPIO2                51
+#define INTERRUPT_GPIO3                52
+#define INTERRUPT_I2C                  53
+#define INTERRUPT_SPI                  54
+#define INTERRUPT_I2SPCM               55
+#define INTERRUPT_SDIO                 56
+#define INTERRUPT_UART                 57
+#define INTERRUPT_SLIMBUS              58
+#define INTERRUPT_VEC                  59
+#define INTERRUPT_CPG                  60
+#define INTERRUPT_RNG                  61
+#define INTERRUPT_ARASANSDIO           62
+#define INTERRUPT_AVSPMON              63
+
+/* ARM CPU IRQs use a private number space */
+#define INTERRUPT_ARM_TIMER            0
+#define INTERRUPT_ARM_MAILBOX          1
+#define INTERRUPT_ARM_DOORBELL_0       2
+#define INTERRUPT_ARM_DOORBELL_1       3
+#define INTERRUPT_VPU0_HALTED          4
+#define INTERRUPT_VPU1_HALTED          5
+#define INTERRUPT_ILLEGAL_TYPE0        6
+#define INTERRUPT_ILLEGAL_TYPE1        7