dev-serial: style changes to improve readability and checkpatch fixes

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-2-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 126 insertions, 104 deletions

diff --git a/hw/usb/dev-serial.c b/hw/usb/dev-serial.c
index b1622b7c7f..7a5fa3770e 100644
--- a/hw/usb/dev-serial.c
+++ b/hw/usb/dev-serial.c
@@ -33,72 +33,75 @@ do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)
 #define RECV_BUF (512 - (2 * 8))
 
 /* Commands */
-#define FTDI_RESET		0
-#define FTDI_SET_MDM_CTRL	1
-#define FTDI_SET_FLOW_CTRL	2
-#define FTDI_SET_BAUD		3
-#define FTDI_SET_DATA		4
-#define FTDI_GET_MDM_ST		5
-#define FTDI_SET_EVENT_CHR	6
-#define FTDI_SET_ERROR_CHR	7
-#define FTDI_SET_LATENCY	9
-#define FTDI_GET_LATENCY	10
-
-#define DeviceOutVendor	((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
-#define DeviceInVendor	((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
+#define FTDI_RESET             0
+#define FTDI_SET_MDM_CTRL      1
+#define FTDI_SET_FLOW_CTRL     2
+#define FTDI_SET_BAUD          3
+#define FTDI_SET_DATA          4
+#define FTDI_GET_MDM_ST        5
+#define FTDI_SET_EVENT_CHR     6
+#define FTDI_SET_ERROR_CHR     7
+#define FTDI_SET_LATENCY       9
+#define FTDI_GET_LATENCY       10
+
+#define DeviceOutVendor \
+           ((USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8)
+#define DeviceInVendor \
+           ((USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8)
 
 /* RESET */
 
-#define FTDI_RESET_SIO	0
-#define FTDI_RESET_RX	1
-#define FTDI_RESET_TX	2
+#define FTDI_RESET_SIO 0
+#define FTDI_RESET_RX  1
+#define FTDI_RESET_TX  2
 
 /* SET_MDM_CTRL */
 
-#define FTDI_DTR	1
-#define FTDI_SET_DTR	(FTDI_DTR << 8)
-#define FTDI_RTS	2
-#define FTDI_SET_RTS	(FTDI_RTS << 8)
+#define FTDI_DTR       1
+#define FTDI_SET_DTR   (FTDI_DTR << 8)
+#define FTDI_RTS       2
+#define FTDI_SET_RTS   (FTDI_RTS << 8)
 
 /* SET_FLOW_CTRL */
 
-#define FTDI_RTS_CTS_HS		1
-#define FTDI_DTR_DSR_HS		2
-#define FTDI_XON_XOFF_HS	4
+#define FTDI_RTS_CTS_HS    1
+#define FTDI_DTR_DSR_HS    2
+#define FTDI_XON_XOFF_HS   4
 
 /* SET_DATA */
 
-#define FTDI_PARITY	(0x7 << 8)
-#define FTDI_ODD	(0x1 << 8)
-#define FTDI_EVEN	(0x2 << 8)
-#define FTDI_MARK	(0x3 << 8)
-#define FTDI_SPACE	(0x4 << 8)
+#define FTDI_PARITY    (0x7 << 8)
+#define FTDI_ODD       (0x1 << 8)
+#define FTDI_EVEN      (0x2 << 8)
+#define FTDI_MARK      (0x3 << 8)
+#define FTDI_SPACE     (0x4 << 8)
 
-#define FTDI_STOP	(0x3 << 11)
-#define FTDI_STOP1	(0x0 << 11)
-#define FTDI_STOP15	(0x1 << 11)
-#define FTDI_STOP2	(0x2 << 11)
+#define FTDI_STOP      (0x3 << 11)
+#define FTDI_STOP1     (0x0 << 11)
+#define FTDI_STOP15    (0x1 << 11)
+#define FTDI_STOP2     (0x2 << 11)
 
 /* GET_MDM_ST */
 /* TODO: should be sent every 40ms */
-#define FTDI_CTS  (1<<4)        // CTS line status
-#define FTDI_DSR  (1<<5)        // DSR line status
-#define FTDI_RI   (1<<6)        // RI line status
-#define FTDI_RLSD (1<<7)        // Receive Line Signal Detect
+#define FTDI_CTS   (1 << 4)    /* CTS line status */
+#define FTDI_DSR   (1 << 5)    /* DSR line status */
+#define FTDI_RI    (1 << 6)    /* RI line status */
+#define FTDI_RLSD  (1 << 7)    /* Receive Line Signal Detect */
 
 /* Status */
 
-#define FTDI_DR   (1<<0)        // Data Ready
-#define FTDI_OE   (1<<1)        // Overrun Err
-#define FTDI_PE   (1<<2)        // Parity Err
-#define FTDI_FE   (1<<3)        // Framing Err
-#define FTDI_BI   (1<<4)        // Break Interrupt
-#define FTDI_THRE (1<<5)        // Transmitter Holding Register
-#define FTDI_TEMT (1<<6)        // Transmitter Empty
-#define FTDI_FIFO (1<<7)        // Error in FIFO
+#define FTDI_DR    (1 << 0)    /* Data Ready */
+#define FTDI_OE    (1 << 1)    /* Overrun Err */
+#define FTDI_PE    (1 << 2)    /* Parity Err */
+#define FTDI_FE    (1 << 3)    /* Framing Err */
+#define FTDI_BI    (1 << 4)    /* Break Interrupt */
+#define FTDI_THRE  (1 << 5)    /* Transmitter Holding Register */
+#define FTDI_TEMT  (1 << 6)    /* Transmitter Empty */
+#define FTDI_FIFO  (1 << 7)    /* Error in FIFO */
 
 struct USBSerialState {
     USBDevice dev;
+
     USBEndpoint *intr;
     uint8_t recv_buf[RECV_BUF];
     uint16_t recv_ptr;
@@ -216,29 +219,34 @@ static uint8_t usb_get_modem_lines(USBSerialState *s)
 
     if (qemu_chr_fe_ioctl(&s->cs,
                           CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) {
-        return FTDI_CTS|FTDI_DSR|FTDI_RLSD;
+        return FTDI_CTS | FTDI_DSR | FTDI_RLSD;
     }
 
     ret = 0;
-    if (flags & CHR_TIOCM_CTS)
+    if (flags & CHR_TIOCM_CTS) {
         ret |= FTDI_CTS;
-    if (flags & CHR_TIOCM_DSR)
+    }
+    if (flags & CHR_TIOCM_DSR) {
         ret |= FTDI_DSR;
-    if (flags & CHR_TIOCM_RI)
+    }
+    if (flags & CHR_TIOCM_RI) {
         ret |= FTDI_RI;
-    if (flags & CHR_TIOCM_CAR)
+    }
+    if (flags & CHR_TIOCM_CAR) {
         ret |= FTDI_RLSD;
+    }
 
     return ret;
 }
 
 static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
-               int request, int value, int index, int length, uint8_t *data)
+                                      int request, int value, int index,
+                                      int length, uint8_t *data)
 {
     USBSerialState *s = (USBSerialState *)dev;
     int ret;
 
-    DPRINTF("got control %x, value %x\n",request, value);
+    DPRINTF("got control %x, value %x\n", request, value);
     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
     if (ret >= 0) {
         return;
@@ -248,7 +256,7 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
         break;
 
-        /* Class specific requests.  */
+    /* Class specific requests.  */
     case DeviceOutVendor | FTDI_RESET:
         switch (value) {
         case FTDI_RESET_SIO:
@@ -269,16 +277,18 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
         static int flags;
         qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
         if (value & FTDI_SET_RTS) {
-            if (value & FTDI_RTS)
+            if (value & FTDI_RTS) {
                 flags |= CHR_TIOCM_RTS;
-            else
+            } else {
                 flags &= ~CHR_TIOCM_RTS;
+            }
         }
         if (value & FTDI_SET_DTR) {
-            if (value & FTDI_DTR)
+            if (value & FTDI_DTR) {
                 flags |= CHR_TIOCM_DTR;
-            else
+            } else {
                 flags &= ~CHR_TIOCM_DTR;
+            }
         }
         qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
         break;
@@ -293,10 +303,12 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
         int divisor = value & 0x3fff;
 
         /* chip special cases */
-        if (divisor == 1 && subdivisor8 == 0)
+        if (divisor == 1 && subdivisor8 == 0) {
             subdivisor8 = 4;
-        if (divisor == 0 && subdivisor8 == 0)
+        }
+        if (divisor == 0 && subdivisor8 == 0) {
             divisor = 1;
+        }
 
         s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);
         qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
@@ -304,30 +316,32 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
     }
     case DeviceOutVendor | FTDI_SET_DATA:
         switch (value & FTDI_PARITY) {
-            case 0:
-                s->params.parity = 'N';
-                break;
-            case FTDI_ODD:
-                s->params.parity = 'O';
-                break;
-            case FTDI_EVEN:
-                s->params.parity = 'E';
-                break;
-            default:
-                DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
-                goto fail;
+        case 0:
+            s->params.parity = 'N';
+            break;
+        case FTDI_ODD:
+            s->params.parity = 'O';
+            break;
+        case FTDI_EVEN:
+            s->params.parity = 'E';
+            break;
+        default:
+            DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
+            goto fail;
         }
+
         switch (value & FTDI_STOP) {
-            case FTDI_STOP1:
-                s->params.stop_bits = 1;
-                break;
-            case FTDI_STOP2:
-                s->params.stop_bits = 2;
-                break;
-            default:
-                DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
-                goto fail;
+        case FTDI_STOP1:
+            s->params.stop_bits = 1;
+            break;
+        case FTDI_STOP2:
+            s->params.stop_bits = 2;
+            break;
+        default:
+            DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
+            goto fail;
         }
+
         qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
         /* TODO: TX ON/OFF */
         break;
@@ -423,20 +437,24 @@ static void usb_serial_handle_data(USBDevice *dev, USBPacket *p)
 
     switch (p->pid) {
     case USB_TOKEN_OUT:
-        if (devep != 2)
+        if (devep != 2) {
             goto fail;
+        }
         for (i = 0; i < p->iov.niov; i++) {
             iov = p->iov.iov + i;
-            /* XXX this blocks entire thread. Rewrite to use
-             * qemu_chr_fe_write and background I/O callbacks */
+            /*
+             * XXX this blocks entire thread. Rewrite to use
+             * qemu_chr_fe_write and background I/O callbacks
+             */
             qemu_chr_fe_write_all(&s->cs, iov->iov_base, iov->iov_len);
         }
         p->actual_length = p->iov.size;
         break;
 
     case USB_TOKEN_IN:
-        if (devep != 1)
+        if (devep != 1) {
             goto fail;
+        }
         usb_serial_token_in(s, p);
         break;
 
@@ -464,21 +482,24 @@ static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
     int first_size, start;
 
     /* room in the buffer? */
-    if (size > (RECV_BUF - s->recv_used))
+    if (size > (RECV_BUF - s->recv_used)) {
         size = RECV_BUF - s->recv_used;
+    }
 
     start = s->recv_ptr + s->recv_used;
     if (start < RECV_BUF) {
         /* copy data to end of buffer */
         first_size = RECV_BUF - start;
-        if (first_size > size)
+        if (first_size > size) {
             first_size = size;
+        }
 
         memcpy(s->recv_buf + start, buf, first_size);
 
         /* wrap around to front if needed */
-        if (size > first_size)
+        if (size > first_size) {
             memcpy(s->recv_buf, buf + first_size, size - first_size);
+        }
     } else {
         start -= RECV_BUF;
         memcpy(s->recv_buf + start, buf, size);
@@ -493,23 +514,23 @@ static void usb_serial_event(void *opaque, QEMUChrEvent event)
     USBSerialState *s = opaque;
 
     switch (event) {
-        case CHR_EVENT_BREAK:
-            s->event_trigger |= FTDI_BI;
-            break;
-        case CHR_EVENT_OPENED:
-            if (!s->dev.attached) {
-                usb_device_attach(&s->dev, &error_abort);
-            }
-            break;
-        case CHR_EVENT_CLOSED:
-            if (s->dev.attached) {
-                usb_device_detach(&s->dev);
-            }
-            break;
-        case CHR_EVENT_MUX_IN:
-        case CHR_EVENT_MUX_OUT:
-            /* Ignore */
-            break;
+    case CHR_EVENT_BREAK:
+        s->event_trigger |= FTDI_BI;
+        break;
+    case CHR_EVENT_OPENED:
+        if (!s->dev.attached) {
+            usb_device_attach(&s->dev, &error_abort);
+        }
+        break;
+    case CHR_EVENT_CLOSED:
+        if (s->dev.attached) {
+            usb_device_detach(&s->dev);
+        }
+        break;
+    case CHR_EVENT_MUX_IN:
+    case CHR_EVENT_MUX_OUT:
+        /* Ignore */
+        break;
     }
 }
 
@@ -549,8 +570,9 @@ static USBDevice *usb_braille_init(const char *unused)
     Chardev *cdrv;
 
     cdrv = qemu_chr_new("braille", "braille", NULL);
-    if (!cdrv)
+    if (!cdrv) {
         return NULL;
+    }
 
     dev = usb_new("usb-braille");
     qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);