hw/arm/sbsa-ref: use XHCI to replace EHCI

The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.

We bump the platform version to 0.3 with this change.  Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB.  (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.

Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
 changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

2 files changed, 14 insertions, 11 deletions

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 7de17d1e8c..7e68348440 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -266,7 +266,7 @@ config SBSA_REF
     select PL011 # UART
     select PL031 # RTC
     select PL061 # GPIO
-    select USB_EHCI_SYSBUS
+    select USB_XHCI_SYSBUS
     select WDT_SBSA
     select BOCHS_DISPLAY
 
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index 82a28b2e0b..1a8519b868 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -42,6 +42,7 @@
 #include "hw/pci-host/gpex.h"
 #include "hw/qdev-properties.h"
 #include "hw/usb.h"
+#include "hw/usb/xhci.h"
 #include "hw/char/pl011.h"
 #include "hw/watchdog/sbsa_gwdt.h"
 #include "net/net.h"
@@ -85,7 +86,7 @@ enum {
     SBSA_SECURE_UART_MM,
     SBSA_SECURE_MEM,
     SBSA_AHCI,
-    SBSA_EHCI,
+    SBSA_XHCI,
 };
 
 struct SBSAMachineState {
@@ -123,7 +124,7 @@ static const MemMapEntry sbsa_ref_memmap[] = {
     [SBSA_SMMU] =               { 0x60050000, 0x00020000 },
     /* Space here reserved for more SMMUs */
     [SBSA_AHCI] =               { 0x60100000, 0x00010000 },
-    [SBSA_EHCI] =               { 0x60110000, 0x00010000 },
+    [SBSA_XHCI] =               { 0x60110000, 0x00010000 },
     /* Space here reserved for other devices */
     [SBSA_PCIE_PIO] =           { 0x7fff0000, 0x00010000 },
     /* 32-bit address PCIE MMIO space */
@@ -143,7 +144,7 @@ static const int sbsa_ref_irqmap[] = {
     [SBSA_SECURE_UART] = 8,
     [SBSA_SECURE_UART_MM] = 9,
     [SBSA_AHCI] = 10,
-    [SBSA_EHCI] = 11,
+    [SBSA_XHCI] = 11,
     [SBSA_SMMU] = 12, /* ... to 15 */
     [SBSA_GWDT_WS0] = 16,
 };
@@ -230,7 +231,7 @@ static void create_fdt(SBSAMachineState *sms)
      *                        fw compatibility.
      */
     qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0);
-    qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 2);
+    qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 3);
 
     if (ms->numa_state->have_numa_distance) {
         int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
@@ -604,13 +605,15 @@ static void create_ahci(const SBSAMachineState *sms)
     }
 }
 
-static void create_ehci(const SBSAMachineState *sms)
+static void create_xhci(const SBSAMachineState *sms)
 {
-    hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base;
-    int irq = sbsa_ref_irqmap[SBSA_EHCI];
+    hwaddr base = sbsa_ref_memmap[SBSA_XHCI].base;
+    int irq = sbsa_ref_irqmap[SBSA_XHCI];
+    DeviceState *dev = qdev_new(TYPE_XHCI_SYSBUS);
 
-    sysbus_create_simple("platform-ehci-usb", base,
-                         qdev_get_gpio_in(sms->gic, irq));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(sms->gic, irq));
 }
 
 static void create_smmu(const SBSAMachineState *sms, PCIBus *bus)
@@ -832,7 +835,7 @@ static void sbsa_ref_init(MachineState *machine)
 
     create_ahci(sms);
 
-    create_ehci(sms);
+    create_xhci(sms);
 
     create_pcie(sms);