rc4030 registers improvements

Attached patch documents some registers and simplifies one hack.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7030 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 70 insertions, 49 deletions

diff --git a/hw/rc4030.c b/hw/rc4030.c
index c86538557d..d83f111c21 100644
--- a/hw/rc4030.c
+++ b/hw/rc4030.c
@@ -1,7 +1,7 @@
 /*
  * QEMU JAZZ RC4030 chipset
  *
- * Copyright (c) 2007-2008 Hervé Poussineau
+ * Copyright (c) 2007-2009 Herve Poussineau
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -66,6 +66,7 @@ typedef struct dma_pagetable_entry {
 typedef struct rc4030State
 {
     uint32_t config; /* 0x0000: RC4030 config register */
+    uint32_t revision; /* 0x0008: RC4030 Revision register */
     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
 
     /* DMA */
@@ -74,17 +75,17 @@ typedef struct rc4030State
     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
 
     /* cache */
+    uint32_t cache_maint; /* 0x0030: Cache Maintenance */
     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
-    uint32_t cache_bwin; /* 0x0060: I/O Cache Buffer Window */
 
+    uint32_t nmi_interrupt; /* 0x0200: interrupt source */
     uint32_t offset210;
     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
-    uint32_t offset238;
-    uint32_t rem_speed[15];
+    uint32_t rem_speed[16];
     uint32_t imr_jazz; /* Local bus int enable mask */
     uint32_t isr_jazz; /* Local bus int source */
 
@@ -118,6 +119,10 @@ static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr)
     case 0x0000:
         val = s->config;
         break;
+    /* Revision register */
+    case 0x0008:
+        val = s->revision;
+        break;
     /* Invalid Address register */
     case 0x0010:
         val = s->invalid_address_register;
@@ -161,6 +166,7 @@ static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr)
     case 0x00d0:
     case 0x00d8:
     case 0x00e0:
+    case 0x00e8:
         val = s->rem_speed[(addr - 0x0070) >> 3];
         break;
     /* DMA channel base address */
@@ -202,7 +208,11 @@ static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr)
             val = s->dma_regs[entry][idx];
         }
         break;
-    /* Offset 0x0208 */
+    /* Interrupt source */
+    case 0x0200:
+        val = s->nmi_interrupt;
+        break;
+    /* Error type */
     case 0x0208:
         val = 0;
         break;
@@ -219,9 +229,9 @@ static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr)
         val = 0;
         qemu_irq_lower(s->timer_irq);
         break;
-    /* Offset 0x0238 */
+    /* EISA interrupt */
     case 0x0238:
-        val = s->offset238;
+        val = 7; /* FIXME: should be read from EISA controller */
         break;
     default:
         RC4030_ERROR("invalid read [" TARGET_FMT_plx "]\n", addr);
@@ -275,7 +285,7 @@ static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
         break;
     /* Cache Maintenance */
     case 0x0030:
-        RC4030_ERROR("Cache maintenance not handled yet (val 0x%02x)\n", val);
+        s->cache_maint = val;
         break;
     /* I/O Cache Physical Tag */
     case 0x0048:
@@ -291,16 +301,11 @@ static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
         break;
     /* I/O Cache Buffer Window */
     case 0x0060:
-        s->cache_bwin = val;
         /* HACK */
         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
-            target_phys_addr_t dests[] = { 4, 0, 8, 0x10 };
-            static int current = 0;
-            target_phys_addr_t dest = 0 + dests[current];
-            uint8_t buf;
-            current = (current + 1) % (ARRAY_SIZE(dests));
-            buf = s->cache_bwin - 1;
-            cpu_physical_memory_rw(dest, &buf, 1, 1);
+            target_phys_addr_t dest = s->cache_ptag & ~0x1;
+            dest += (s->cache_maint & 0x3) << 3;
+            cpu_physical_memory_rw(dest, (uint8_t*)&val, 4, 1);
         }
         break;
     /* Remote Speed Registers */
@@ -319,6 +324,7 @@ static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
     case 0x00d0:
     case 0x00d8:
     case 0x00e0:
+    case 0x00e8:
         s->rem_speed[(addr - 0x0070) >> 3] = val;
         break;
     /* DMA channel base address */
@@ -370,6 +376,9 @@ static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
         qemu_irq_lower(s->timer_irq);
         set_next_tick(s);
         break;
+    /* EISA interrupt */
+    case 0x0238:
+        break;
     default:
         RC4030_ERROR("invalid write of 0x%02x at [" TARGET_FMT_plx "]\n", val, addr);
         break;
@@ -580,21 +589,23 @@ static void rc4030_reset(void *opaque)
     int i;
 
     s->config = 0x410; /* some boards seem to accept 0x104 too */
+    s->revision = 1;
     s->invalid_address_register = 0;
 
     memset(s->dma_regs, 0, sizeof(s->dma_regs));
     s->dma_tl_base = s->dma_tl_limit = 0;
 
     s->remote_failed_address = s->memory_failed_address = 0;
+    s->cache_maint = 0;
     s->cache_ptag = s->cache_ltag = 0;
-    s->cache_bmask = s->cache_bwin = 0;
+    s->cache_bmask = 0;
 
     s->offset210 = 0x18186;
     s->nvram_protect = 7;
-    s->offset238 = 7;
     for (i = 0; i < 15; i++)
         s->rem_speed[i] = 7;
-    s->imr_jazz = s->isr_jazz = 0;
+    s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
+    s->isr_jazz = 0;
 
     s->itr = 0;
 
@@ -607,7 +618,7 @@ static int rc4030_load(QEMUFile *f, void *opaque, int version_id)
     rc4030State* s = opaque;
     int i, j;
 
-    if (version_id != 1)
+    if (version_id != 2)
         return -EINVAL;
 
     s->config = qemu_get_be32(f);
@@ -617,15 +628,14 @@ static int rc4030_load(QEMUFile *f, void *opaque, int version_id)
             s->dma_regs[i][j] = qemu_get_be32(f);
     s->dma_tl_base = qemu_get_be32(f);
     s->dma_tl_limit = qemu_get_be32(f);
+    s->cache_maint = qemu_get_be32(f);
     s->remote_failed_address = qemu_get_be32(f);
     s->memory_failed_address = qemu_get_be32(f);
     s->cache_ptag = qemu_get_be32(f);
     s->cache_ltag = qemu_get_be32(f);
     s->cache_bmask = qemu_get_be32(f);
-    s->cache_bwin = qemu_get_be32(f);
     s->offset210 = qemu_get_be32(f);
     s->nvram_protect = qemu_get_be32(f);
-    s->offset238 = qemu_get_be32(f);
     for (i = 0; i < 15; i++)
         s->rem_speed[i] = qemu_get_be32(f);
     s->imr_jazz = qemu_get_be32(f);
@@ -650,15 +660,14 @@ static void rc4030_save(QEMUFile *f, void *opaque)
             qemu_put_be32(f, s->dma_regs[i][j]);
     qemu_put_be32(f, s->dma_tl_base);
     qemu_put_be32(f, s->dma_tl_limit);
+    qemu_put_be32(f, s->cache_maint);
     qemu_put_be32(f, s->remote_failed_address);
     qemu_put_be32(f, s->memory_failed_address);
     qemu_put_be32(f, s->cache_ptag);
     qemu_put_be32(f, s->cache_ltag);
     qemu_put_be32(f, s->cache_bmask);
-    qemu_put_be32(f, s->cache_bwin);
     qemu_put_be32(f, s->offset210);
     qemu_put_be32(f, s->nvram_protect);
-    qemu_put_be32(f, s->offset238);
     for (i = 0; i < 15; i++)
         qemu_put_be32(f, s->rem_speed[i]);
     qemu_put_be32(f, s->imr_jazz);
@@ -666,44 +675,28 @@ static void rc4030_save(QEMUFile *f, void *opaque)
     qemu_put_be32(f, s->itr);
 }
 
-static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
+static void rc4030_dma_memory_rw(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len, int is_write)
 {
     rc4030State *s = opaque;
     target_phys_addr_t entry_addr;
-    target_phys_addr_t dma_addr, phys_addr;
+    target_phys_addr_t phys_addr;
     dma_pagetable_entry entry;
-    int index, dev_to_mem;
+    int index;
     int ncpy, i;
 
-    s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
-
-    /* Check DMA channel consistency */
-    dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
-    if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
-        (is_write != dev_to_mem)) {
-        s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
-        return;
-    }
-
-    if (len > s->dma_regs[n][DMA_REG_COUNT])
-        len = s->dma_regs[n][DMA_REG_COUNT];
-
-    dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
     i = 0;
     for (;;) {
         if (i == len) {
-            s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
             break;
         }
 
-        ncpy = DMA_PAGESIZE - (dma_addr & (DMA_PAGESIZE - 1));
+        ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1));
         if (ncpy > len - i)
             ncpy = len - i;
 
         /* Get DMA translation table entry */
-        index = dma_addr / DMA_PAGESIZE;
+        index = addr / DMA_PAGESIZE;
         if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) {
-            s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
             break;
         }
         entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry);
@@ -712,14 +705,42 @@ static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_wri
         cpu_physical_memory_rw(entry_addr, (uint8_t *)&entry, sizeof(entry), 0);
 
         /* Read/write data at right place */
-        phys_addr = entry.frame + (dma_addr & (DMA_PAGESIZE - 1));
+        phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1));
         cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write);
 
         i += ncpy;
-        dma_addr += ncpy;
-        s->dma_regs[n][DMA_REG_COUNT] -= ncpy;
+        addr += ncpy;
+    }
+}
+
+static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
+{
+    rc4030State *s = opaque;
+    target_phys_addr_t dma_addr;
+    int dev_to_mem;
+
+    s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
+
+    /* Check DMA channel consistency */
+    dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
+    if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
+        (is_write != dev_to_mem)) {
+        s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
+        s->nmi_interrupt |= 1 << n;
+        return;
     }
 
+    /* Get start address and len */
+    if (len > s->dma_regs[n][DMA_REG_COUNT])
+        len = s->dma_regs[n][DMA_REG_COUNT];
+    dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
+
+    /* Read/write data at right place */
+    rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write);
+
+    s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
+    s->dma_regs[n][DMA_REG_COUNT] -= len;
+
 #ifdef DEBUG_RC4030_DMA
     {
         int i, j;
@@ -792,7 +813,7 @@ qemu_irq *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,
     s->jazz_bus_irq = jazz_bus;
 
     qemu_register_reset(rc4030_reset, s);
-    register_savevm("rc4030", 0, 1, rc4030_save, rc4030_load, s);
+    register_savevm("rc4030", 0, 2, rc4030_save, rc4030_load, s);
     rc4030_reset(s);
 
     s_chipset = cpu_register_io_memory(0, rc4030_read, rc4030_write, s);