piix_pci: optimize set irq path

optimize irq routing in piix_pic.c which has been a TODO.
So far piix3 tracks each pirq level and checks whether a given pic pins is
asserted by seeing if each pirq is mapped into the pic pin.
This is independent on irq routing, but data path is on slow path.

Given that irq routing is rarely changed and asserting pic pins is on
data path, the path that asserts pic pins should be optimized and
chainging irq routing should be on slow path.
The new behavior with this patch series is to use bitmap which is addressed
by pirq and pic pins with a given irq routing.
When pirq is asserted, the bitmap is set and see if the pic pins is
asserted by checking the bitmaps.
When irq routing is changed, rebuild the bitmap and re-assert pic pins.

test:
- create VM with 4 e1000 nics in different pci slots
  (i.e. fn=0 for each e1000)
  Thus those e1000's INTA are connected to each PIRQ[A-D].
- run linux as guest and saw each devices triggers interrupt
  by seeing /proc/interrupts. And then confirmed that each PIRQ[A-D]
  surely asserted interrupts.
  Because irq 10 and 11 are shared by 4 e1000's, it only one NIC is activated
  with ifconfig ethN up/down when counting interrupts.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

1 files changed, 84 insertions, 17 deletions

diff --git a/hw/piix_pci.c b/hw/piix_pci.c
index 35e420c31d..7ffb8218ce 100644
--- a/hw/piix_pci.c
+++ b/hw/piix_pci.c
@@ -37,10 +37,27 @@
 
 typedef PCIHostState I440FXState;
 
+#define PIIX_NUM_PIC_IRQS       16      /* i8259 * 2 */
 #define PIIX_NUM_PIRQS          4ULL    /* PIRQ[A-D] */
+#define PIIX_PIRQC              0x60
 
 typedef struct PIIX3State {
     PCIDevice dev;
+
+    /*
+     * bitmap to track pic levels.
+     * The pic level is the logical OR of all the PCI irqs mapped to it
+     * So one PIC level is tracked by PIIX_NUM_PIRQS bits.
+     *
+     * PIRQ is mapped to PIC pins, we track it by
+     * PIIX_NUM_PIRQS * PIIX_NUM_PIC_IRQS = 64 bits with
+     * pic_irq * PIIX_NUM_PIRQS + pirq
+     */
+#if PIIX_NUM_PIC_IRQS * PIIX_NUM_PIRQS > 64
+#error "unable to encode pic state in 64bit in pic_levels."
+#endif
+    uint64_t pic_levels;
+
     qemu_irq *pic;
 
     /* This member isn't used. Just for save/load compatibility */
@@ -59,16 +76,16 @@ struct PCII440FXState {
 #define I440FX_PAM_SIZE 7
 #define I440FX_SMRAM    0x72
 
-static void piix3_set_irq(void *opaque, int irq_num, int level);
+static void piix3_set_irq(void *opaque, int pirq, int level);
 
 /* return the global irq number corresponding to a given device irq
    pin. We could also use the bus number to have a more precise
    mapping. */
-static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
+static int pci_slot_get_pirq(PCIDevice *pci_dev, int pci_intx)
 {
     int slot_addend;
     slot_addend = (pci_dev->devfn >> 3) - 1;
-    return (irq_num + slot_addend) & 3;
+    return (pci_intx + slot_addend) & 3;
 }
 
 static void update_pam(PCII440FXState *d, uint32_t start, uint32_t end, int r)
@@ -256,25 +273,64 @@ PCIBus *i440fx_init(PCII440FXState **pi440fx_state, int *piix3_devfn, qemu_irq *
 }
 
 /* PIIX3 PCI to ISA bridge */
+static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
+{
+    qemu_set_irq(piix3->pic[pic_irq],
+                 !!(piix3->pic_levels &
+                    (((1UL << PIIX_NUM_PIRQS) - 1) <<
+                     (pic_irq * PIIX_NUM_PIRQS))));
+}
 
-static void piix3_set_irq(void *opaque, int irq_num, int level)
+static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level,
+                                bool propagate)
+{
+    int pic_irq;
+    uint64_t mask;
+
+    pic_irq = piix3->dev.config[PIIX_PIRQC + pirq];
+    if (pic_irq >= PIIX_NUM_PIC_IRQS) {
+        return;
+    }
+
+    mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
+    piix3->pic_levels &= ~mask;
+    piix3->pic_levels |= mask * !!level;
+
+    if (propagate) {
+        piix3_set_irq_pic(piix3, pic_irq);
+    }
+}
+
+static void piix3_set_irq(void *opaque, int pirq, int level)
 {
-    int i, pic_irq, pic_level;
     PIIX3State *piix3 = opaque;
+    piix3_set_irq_level(piix3, pirq, level, true);
+}
 
-    /* now we change the pic irq level according to the piix irq mappings */
-    /* XXX: optimize */
-    pic_irq = piix3->dev.config[0x60 + irq_num];
-    if (pic_irq < 16) {
-        /* The pic level is the logical OR of all the PCI irqs mapped
-           to it */
-        pic_level = 0;
-        for (i = 0; i < 4; i++) {
-            if (pic_irq == piix3->dev.config[0x60 + i]) {
-                pic_level |= pci_bus_get_irq_level(piix3->dev.bus, i);
-            }
+/* irq routing is changed. so rebuild bitmap */
+static void piix3_update_irq_levels(PIIX3State *piix3)
+{
+    int pirq;
+
+    piix3->pic_levels = 0;
+    for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
+        piix3_set_irq_level(piix3, pirq,
+                            pci_bus_get_irq_level(piix3->dev.bus, pirq),
+                            false);
+    }
+}
+
+static void piix3_write_config(PCIDevice *dev,
+                               uint32_t address, uint32_t val, int len)
+{
+    pci_default_write_config(dev, address, val, len);
+    if (ranges_overlap(address, len, PIIX_PIRQC, 4)) {
+        PIIX3State *piix3 = DO_UPCAST(PIIX3State, dev, dev);
+        int pic_irq;
+        piix3_update_irq_levels(piix3);
+        for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
+            piix3_set_irq_pic(piix3, pic_irq);
         }
-        qemu_set_irq(piix3->pic[pic_irq], pic_level);
     }
 }
 
@@ -314,6 +370,15 @@ static void piix3_reset(void *opaque)
     pci_conf[0xab] = 0x00;
     pci_conf[0xac] = 0x00;
     pci_conf[0xae] = 0x00;
+
+    d->pic_levels = 0;
+}
+
+static int piix3_post_load(void *opaque, int version_id)
+{
+    PIIX3State *piix3 = opaque;
+    piix3_update_irq_levels(piix3);
+    return 0;
 }
 
 static void piix3_pre_save(void *opaque)
@@ -332,6 +397,7 @@ static const VMStateDescription vmstate_piix3 = {
     .version_id = 3,
     .minimum_version_id = 2,
     .minimum_version_id_old = 2,
+    .post_load = piix3_post_load,
     .pre_save = piix3_pre_save,
     .fields      = (VMStateField []) {
         VMSTATE_PCI_DEVICE(dev, PIIX3State),
@@ -375,6 +441,7 @@ static PCIDeviceInfo i440fx_info[] = {
         .qdev.no_user = 1,
         .no_hotplug   = 1,
         .init         = piix3_initfn,
+        .config_write = piix3_write_config,
     },{
         /* end of list */
     }