PCI SCSI HBA emulation.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1946 c046a42c-6fe2-441c-8c8c-71466251a162

4 files changed, 1624 insertions, 14 deletions

diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
new file mode 100644
index 0000000000..24dff0eff5
--- /dev/null
+++ b/hw/lsi53c895a.c
@@ -0,0 +1,1571 @@
+/* 
+ * QEMU LSI53C895A SCSI Host Bus Adapter emulation
+ *
+ * Copyright (c) 2006 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the LGPL.
+ */
+
+/* ??? Need to check if the {read,write}[wl] routines work properly on
+   big-endian targets.  */
+
+#include "vl.h"
+
+//#define DEBUG_LSI
+//#define DEBUG_LSI_REG
+
+#ifdef DEBUG_LSI
+#define DPRINTF(fmt, args...) \
+do { printf("lsi_scsi: " fmt , ##args); } while (0)
+#define BADF(fmt, args...) \
+do { fprintf(stderr, "lsi_scsi: " fmt , ##args); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, args...) do {} while(0)
+#define BADF(fmt, args...) \
+do { fprintf(stderr, "lsi_scsi: " fmt , ##args); } while (0)
+#endif
+
+#define LSI_SCNTL0_TRG    0x01
+#define LSI_SCNTL0_AAP    0x02
+#define LSI_SCNTL0_EPC    0x08
+#define LSI_SCNTL0_WATN   0x10
+#define LSI_SCNTL0_START  0x20
+
+#define LSI_SCNTL1_SST    0x01
+#define LSI_SCNTL1_IARB   0x02
+#define LSI_SCNTL1_AESP   0x04
+#define LSI_SCNTL1_RST    0x08
+#define LSI_SCNTL1_CON    0x10
+#define LSI_SCNTL1_DHP    0x20
+#define LSI_SCNTL1_ADB    0x40
+#define LSI_SCNTL1_EXC    0x80
+
+#define LSI_SCNTL2_WSR    0x01
+#define LSI_SCNTL2_VUE0   0x02
+#define LSI_SCNTL2_VUE1   0x04
+#define LSI_SCNTL2_WSS    0x08
+#define LSI_SCNTL2_SLPHBEN 0x10
+#define LSI_SCNTL2_SLPMD  0x20
+#define LSI_SCNTL2_CHM    0x40
+#define LSI_SCNTL2_SDU    0x80
+
+#define LSI_ISTAT0_DIP    0x01
+#define LSI_ISTAT0_SIP    0x02
+#define LSI_ISTAT0_INTF   0x04
+#define LSI_ISTAT0_CON    0x08
+#define LSI_ISTAT0_SEM    0x10
+#define LSI_ISTAT0_SIGP   0x20
+#define LSI_ISTAT0_SRST   0x40
+#define LSI_ISTAT0_ABRT   0x80
+
+#define LSI_ISTAT1_SI     0x01
+#define LSI_ISTAT1_SRUN   0x02
+#define LSI_ISTAT1_FLSH   0x04
+
+#define LSI_SSTAT0_SDP0   0x01
+#define LSI_SSTAT0_RST    0x02
+#define LSI_SSTAT0_WOA    0x04
+#define LSI_SSTAT0_LOA    0x08
+#define LSI_SSTAT0_AIP    0x10
+#define LSI_SSTAT0_OLF    0x20
+#define LSI_SSTAT0_ORF    0x40
+#define LSI_SSTAT0_ILF    0x80
+
+#define LSI_SIST0_PAR     0x01
+#define LSI_SIST0_RST     0x02
+#define LSI_SIST0_UDC     0x04
+#define LSI_SIST0_SGE     0x08
+#define LSI_SIST0_RSL     0x10
+#define LSI_SIST0_SEL     0x20
+#define LSI_SIST0_CMP     0x40
+#define LSI_SIST0_MA      0x80
+
+#define LSI_SIST1_HTH     0x01
+#define LSI_SIST1_GEN     0x02
+#define LSI_SIST1_STO     0x04
+#define LSI_SIST1_SBMC    0x10
+
+#define LSI_SOCL_IO       0x01
+#define LSI_SOCL_CD       0x02
+#define LSI_SOCL_MSG      0x04
+#define LSI_SOCL_ATN      0x08
+#define LSI_SOCL_SEL      0x10
+#define LSI_SOCL_BSY      0x20
+#define LSI_SOCL_ACK      0x40
+#define LSI_SOCL_REQ      0x80
+
+#define LSI_DSTAT_IID     0x01
+#define LSI_DSTAT_SIR     0x04
+#define LSI_DSTAT_SSI     0x08
+#define LSI_DSTAT_ABRT    0x10
+#define LSI_DSTAT_BF      0x20
+#define LSI_DSTAT_MDPE    0x40
+#define LSI_DSTAT_DFE     0x80
+
+#define LSI_DCNTL_COM     0x01
+#define LSI_DCNTL_IRQD    0x02
+#define LSI_DCNTL_STD     0x04
+#define LSI_DCNTL_IRQM    0x08
+#define LSI_DCNTL_SSM     0x10
+#define LSI_DCNTL_PFEN    0x20
+#define LSI_DCNTL_PFF     0x40
+#define LSI_DCNTL_CLSE    0x80
+
+#define LSI_DMODE_MAN     0x01
+#define LSI_DMODE_BOF     0x02
+#define LSI_DMODE_ERMP    0x04
+#define LSI_DMODE_ERL     0x08
+#define LSI_DMODE_DIOM    0x10
+#define LSI_DMODE_SIOM    0x20
+
+#define LSI_CTEST2_DACK   0x01
+#define LSI_CTEST2_DREQ   0x02
+#define LSI_CTEST2_TEOP   0x04
+#define LSI_CTEST2_PCICIE 0x08
+#define LSI_CTEST2_CM     0x10
+#define LSI_CTEST2_CIO    0x20
+#define LSI_CTEST2_SIGP   0x40
+#define LSI_CTEST2_DDIR   0x80
+
+#define LSI_CTEST5_BL2    0x04
+#define LSI_CTEST5_DDIR   0x08
+#define LSI_CTEST5_MASR   0x10
+#define LSI_CTEST5_DFSN   0x20
+#define LSI_CTEST5_BBCK   0x40
+#define LSI_CTEST5_ADCK   0x80
+
+#define LSI_CCNTL0_DILS   0x01
+#define LSI_CCNTL0_DISFC  0x10
+#define LSI_CCNTL0_ENNDJ  0x20
+#define LSI_CCNTL0_PMJCTL 0x40
+#define LSI_CCNTL0_ENPMJ  0x80
+
+#define PHASE_DO          0
+#define PHASE_DI          1
+#define PHASE_CMD         2
+#define PHASE_ST          3
+#define PHASE_MO          6
+#define PHASE_MI          7
+#define PHASE_MASK        7
+
+/* The HBA is ID 7, so for simplicitly limit to 7 devices.  */
+#define LSI_MAX_DEVS      7
+
+typedef struct {
+    PCIDevice pci_dev;
+    int mmio_io_addr;
+    int ram_io_addr;
+    uint32_t script_ram_base;
+    uint32_t data_len;
+
+    int carry; /* ??? Should this be an a visible register somewhere?  */
+    int sense;
+    uint8_t msg;
+    /* Nonzero if a Wait Reselect instruction has been issued.  */
+    int waiting;
+    SCSIDevice *scsi_dev[LSI_MAX_DEVS];
+    SCSIDevice *current_dev;
+    int current_lun;
+
+    uint32_t dsa;
+    uint32_t temp;
+    uint32_t dnad;
+    uint32_t dbc;
+    uint8_t istat0;
+    uint8_t istat1;
+    uint8_t dcmd;
+    uint8_t dstat;
+    uint8_t dien;
+    uint8_t sist0;
+    uint8_t sist1;
+    uint8_t sien0;
+    uint8_t sien1;
+    uint8_t mbox0;
+    uint8_t mbox1;
+    uint8_t dfifo;
+    uint8_t ctest3;
+    uint8_t ctest4;
+    uint8_t ctest5;
+    uint8_t ccntl0;
+    uint8_t ccntl1;
+    uint32_t dsp;
+    uint32_t dsps;
+    uint8_t dmode;
+    uint8_t dcntl;
+    uint8_t scntl0;
+    uint8_t scntl1;
+    uint8_t scntl2;
+    uint8_t scntl3;
+    uint8_t sstat0;
+    uint8_t sstat1;
+    uint8_t scid;
+    uint8_t sxfer;
+    uint8_t socl;
+    uint8_t sdid;
+    uint8_t sfbr;
+    uint8_t stest1;
+    uint8_t stest2;
+    uint8_t stest3;
+    uint8_t stime0;
+    uint8_t respid0;
+    uint8_t respid1;
+    uint32_t mmrs;
+    uint32_t mmws;
+    uint32_t sfs;
+    uint32_t drs;
+    uint32_t sbms;
+    uint32_t dmbs;
+    uint32_t dnad64;
+    uint32_t pmjad1;
+    uint32_t pmjad2;
+    uint32_t rbc;
+    uint32_t ua;
+    uint32_t ia;
+    uint32_t sbc;
+    uint32_t csbc;
+    uint32_t scratch[13]; /* SCRATCHA-SCRATCHR */
+
+    /* Script ram is stored as 32-bit words in host byteorder.  */
+    uint32_t script_ram[2048];
+} LSIState;
+
+static void lsi_soft_reset(LSIState *s)
+{
+    DPRINTF("Reset\n");
+    s->carry = 0;
+
+    s->waiting = 0;
+    s->dsa = 0;
+    s->dnad = 0;
+    s->dbc = 0;
+    s->temp = 0;
+    memset(s->scratch, 0, sizeof(s->scratch));
+    s->istat0 = 0;
+    s->istat1 = 0;
+    s->dcmd = 0;
+    s->dstat = 0;
+    s->dien = 0;
+    s->sist0 = 0;
+    s->sist1 = 0;
+    s->sien0 = 0;
+    s->sien1 = 0;
+    s->mbox0 = 0;
+    s->mbox1 = 0;
+    s->dfifo = 0;
+    s->ctest3 = 0;
+    s->ctest4 = 0;
+    s->ctest5 = 0;
+    s->ccntl0 = 0;
+    s->ccntl1 = 0;
+    s->dsp = 0;
+    s->dsps = 0;
+    s->dmode = 0;
+    s->dcntl = 0;
+    s->scntl0 = 0xc0;
+    s->scntl1 = 0;
+    s->scntl2 = 0;
+    s->scntl3 = 0;
+    s->sstat0 = 0;
+    s->sstat1 = 0;
+    s->scid = 7;
+    s->sxfer = 0;
+    s->socl = 0;
+    s->stest1 = 0;
+    s->stest2 = 0;
+    s->stest3 = 0;
+    s->stime0 = 0;
+    s->respid0 = 0x80;
+    s->respid1 = 0;
+    s->mmrs = 0;
+    s->mmws = 0;
+    s->sfs = 0;
+    s->drs = 0;
+    s->sbms = 0;
+    s->dmbs = 0;
+    s->dnad64 = 0;
+    s->pmjad1 = 0;
+    s->pmjad2 = 0;
+    s->rbc = 0;
+    s->ua = 0;
+    s->ia = 0;
+    s->sbc = 0;
+    s->csbc = 0;
+}
+
+static uint8_t lsi_reg_readb(LSIState *s, int offset);
+static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val);
+
+static inline uint32_t read_dword(LSIState *s, uint32_t addr)
+{
+    uint32_t buf;
+
+    /* Optimize reading from SCRIPTS RAM.  */
+    if ((addr & 0xffffe000) == s->script_ram_base) {
+        return s->script_ram[(addr & 0x1fff) >> 2];
+    }
+    cpu_physical_memory_read(addr, (uint8_t *)&buf, 4);
+    return cpu_to_le32(buf);
+}
+
+static void lsi_stop_script(LSIState *s)
+{
+    s->istat1 &= ~LSI_ISTAT1_SRUN;
+}
+
+static void lsi_update_irq(LSIState *s)
+{
+    int level;
+    static int last_level;
+
+    /* It's unclear whether the DIP/SIP bits should be cleared when the
+       Interrupt Status Registers are cleared or when istat0 is read.
+       We currently do the formwer, which seems to work.  */
+    level = 0;
+    if (s->dstat) {
+        if (s->dstat & s->dien)
+            level = 1;
+        s->istat0 |= LSI_ISTAT0_DIP;
+    } else {
+        s->istat0 &= ~LSI_ISTAT0_DIP;
+    }
+
+    if (s->sist0 || s->sist1) {
+        if ((s->sist0 & s->sien0) || (s->sist1 & s->sien1))
+            level = 1;
+        s->istat0 |= LSI_ISTAT0_SIP;
+    } else {
+        s->istat0 &= ~LSI_ISTAT0_SIP;
+    }
+    if (s->istat0 & LSI_ISTAT0_INTF)
+        level = 1;
+
+    if (level != last_level) {
+        DPRINTF("Update IRQ level %d dstat %02x sist %02x%02x\n",
+                level, s->dstat, s->sist1, s->sist0);
+        last_level = level;
+    }
+    pci_set_irq(&s->pci_dev, 0, level);
+}
+
+/* Stop SCRIPTS execution and raise a SCSI interrupt.  */
+static void lsi_script_scsi_interrupt(LSIState *s, int stat0, int stat1)
+{
+    uint32_t mask0;
+    uint32_t mask1;
+
+    DPRINTF("SCSI Interrupt 0x%02x%02x prev 0x%02x%02x\n",
+            stat1, stat0, s->sist1, s->sist0);
+    s->sist0 |= stat0;
+    s->sist1 |= stat1;
+    /* Stop processor on fatal or unmasked interrupt.  As a special hack
+       we don't stop processing when raising STO.  Instead continue
+       execution and stop at the next insn that accesses the SCSI bus.  */
+    mask0 = s->sien0 | ~(LSI_SIST0_CMP | LSI_SIST0_SEL | LSI_SIST0_RSL);
+    mask1 = s->sien1 | ~(LSI_SIST1_GEN | LSI_SIST1_HTH);
+    mask1 &= ~LSI_SIST1_STO;
+    if (s->sist0 & mask0 || s->sist1 & mask1) {
+        lsi_stop_script(s);
+    }
+    lsi_update_irq(s);
+}
+
+/* Stop SCRIPTS execution and raise a DMA interrupt.  */
+static void lsi_script_dma_interrupt(LSIState *s, int stat)
+{
+    DPRINTF("DMA Interrupt 0x%x prev 0x%x\n", stat, s->dstat);
+    s->dstat |= stat;
+    lsi_update_irq(s);
+    lsi_stop_script(s);
+}
+
+static inline void lsi_set_phase(LSIState *s, int phase)
+{
+    s->sstat1 = (s->sstat1 & ~PHASE_MASK) | phase;
+}
+
+static void lsi_bad_phase(LSIState *s, int out, int new_phase)
+{
+    /* Trigger a phase mismatch.  */
+    if (s->ccntl0 & LSI_CCNTL0_ENPMJ) {
+        if ((s->ccntl0 & LSI_CCNTL0_PMJCTL) || out) {
+            s->dsp = s->pmjad1;
+        } else {
+            s->dsp = s->pmjad2;
+        }
+        DPRINTF("Data phase mismatch jump to %08x\n", s->dsp);
+    } else {
+        DPRINTF("Phase mismatch interrupt\n");
+        lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
+        lsi_stop_script(s);
+    }
+    lsi_set_phase(s, new_phase);
+}
+
+static void lsi_do_dma(LSIState *s, int out)
+{
+    uint8_t buf[TARGET_PAGE_SIZE];
+    uint32_t addr;
+    uint32_t count;
+    int n;
+
+    count = s->dbc;
+    addr = s->dnad;
+    DPRINTF("DMA %s addr=0x%08x len=%d avail=%d\n", out ? "out" : "in",
+            addr, count, s->data_len);
+    /* ??? Too long transfers are truncated. Don't know if this is the
+       correct behavior.  */
+    if (count > s->data_len) {
+        /* If the DMA length is greater then the device data length then
+           a phase mismatch will occur.  */
+        count = s->data_len;
+        s->dbc = count;
+        lsi_bad_phase(s, out, PHASE_ST);
+    }
+
+    s->csbc += count;
+
+    /* ??? Set SFBR to first data byte.  */
+    while (count) {
+        n = (count > TARGET_PAGE_SIZE) ? TARGET_PAGE_SIZE : count;
+        if (out) {
+            cpu_physical_memory_read(addr, buf, n);
+            scsi_write_data(s->current_dev, buf, n);
+        } else {
+            scsi_read_data(s->current_dev, buf, n);
+            cpu_physical_memory_write(addr, buf, n);
+        }
+        addr += n;
+        count -= n;
+    }
+}
+
+
+static void lsi_do_command(LSIState *s)
+{
+    uint8_t buf[16];
+    int n;
+
+    DPRINTF("Send command len=%d\n", s->dbc);
+    if (s->dbc > 16)
+        s->dbc = 16;
+    cpu_physical_memory_read(s->dnad, buf, s->dbc);
+    s->sfbr = buf[0];
+    n = scsi_send_command(s->current_dev, 0, buf, s->current_lun);
+    if (n > 0) {
+        s->data_len = n;
+        lsi_set_phase(s, PHASE_DI);
+    } else if (n < 0) {
+        s->data_len = -n;
+        lsi_set_phase(s, PHASE_DO);
+    }
+}
+
+static void lsi_command_complete(void *opaque, uint32_t tag, int sense)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    DPRINTF("Command complete sense=%d\n", sense);
+    s->sense = sense;
+    lsi_set_phase(s, PHASE_ST);
+}
+
+static void lsi_do_status(LSIState *s)
+{
+    DPRINTF("Get status len=%d sense=%d\n", s->dbc, s->sense);
+    if (s->dbc != 1)
+        BADF("Bad Status move\n");
+    s->dbc = 1;
+    s->msg = s->sense;
+    cpu_physical_memory_write(s->dnad, &s->msg, 1);
+    s->sfbr = s->msg;
+    lsi_set_phase(s, PHASE_MI);
+    s->msg = 0; /* COMMAND COMPLETE */
+}
+
+static void lsi_disconnect(LSIState *s)
+{
+    s->scntl1 &= ~LSI_SCNTL1_CON;
+    s->sstat1 &= ~PHASE_MASK;
+}
+
+static void lsi_do_msgin(LSIState *s)
+{
+    DPRINTF("Message in len=%d\n", s->dbc);
+    s->dbc = 1;
+    s->sfbr = s->msg;
+    cpu_physical_memory_write(s->dnad, &s->msg, 1);
+    if (s->msg == 0) {
+        lsi_disconnect(s);
+    } else {
+        /* ??? Check if ATN (not yet implemented) is asserted and maybe
+           switch to PHASE_MO.  */
+        lsi_set_phase(s, PHASE_CMD);
+    }
+}
+
+static void lsi_do_msgout(LSIState *s)
+{
+    uint8_t msg;
+
+    DPRINTF("MSG out len=%d\n", s->dbc);
+    if (s->dbc != 1) {
+        /* Multibyte messages not implemented.  */
+        s->msg = 7; /* MESSAGE REJECT */
+        //s->dbc = 1;
+        //lsi_bad_phase(s, 1, PHASE_MI);
+        lsi_set_phase(s, PHASE_MI);
+        return;
+    }
+    cpu_physical_memory_read(s->dnad, &msg, 1);
+    s->sfbr = msg;
+    s->dnad++;
+
+    switch (msg) {
+    case 0x00:
+        DPRINTF("Got Disconnect\n");
+        lsi_disconnect(s);
+        return;
+    case 0x08:
+        DPRINTF("Got No Operation\n");
+        lsi_set_phase(s, PHASE_CMD);
+        return;
+    }
+    if ((msg & 0x80) == 0) {
+        DPRINTF("Unimplemented message 0x%d\n", msg);
+        s->msg = 7; /* MESSAGE REJECT */
+        lsi_bad_phase(s, 1, PHASE_MI);
+        return;
+    }
+    s->current_lun = msg & 7;
+    DPRINTF("Select LUN %d\n", s->current_lun);
+    lsi_set_phase(s, PHASE_CMD);
+}
+
+/* Sign extend a 24-bit value.  */
+static inline int32_t sxt24(int32_t n)
+{
+    return (n << 8) >> 8;
+}
+
+static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count)
+{
+    int n;
+    uint8_t buf[TARGET_PAGE_SIZE];
+
+    DPRINTF("memcpy dest 0x%08x src 0x%08x count %d\n", dest, src, count);
+    while (count) {
+        n = (count > TARGET_PAGE_SIZE) ? TARGET_PAGE_SIZE : count;
+        cpu_physical_memory_read(src, buf, n);
+        cpu_physical_memory_write(dest, buf, n);
+        src += n;
+        dest += n;
+        count -= n;
+    }
+}
+
+static void lsi_execute_script(LSIState *s)
+{
+    uint32_t insn;
+    uint32_t addr;
+    int opcode;
+
+    s->istat1 |= LSI_ISTAT1_SRUN;
+again:
+    insn = read_dword(s, s->dsp);
+    addr = read_dword(s, s->dsp + 4);
+    DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr);
+    s->dsps = addr;
+    s->dcmd = insn >> 24;
+    s->dsp += 8;
+    switch (insn >> 30) {
+    case 0: /* Block move.  */
+        if (s->sist1 & LSI_SIST1_STO) {
+            DPRINTF("Delayed select timeout\n");
+            lsi_stop_script(s);
+            break;
+        }
+        s->dbc = insn & 0xffffff;
+        s->rbc = s->dbc;
+        if (insn & (1 << 29)) {
+            /* Indirect addressing.  */
+            addr = read_dword(s, addr);
+        } else if (insn & (1 << 28)) {
+            uint32_t buf[2];
+            int32_t offset;
+            /* Table indirect addressing.  */
+            offset = sxt24(addr);
+            cpu_physical_memory_read(s->dsa + offset, (uint8_t *)buf, 8);
+            s->dbc = cpu_to_le32(buf[0]);
+            addr = cpu_to_le32(buf[1]);
+        }
+        if ((s->sstat1 & PHASE_MASK) != ((insn >> 24) & 7)) {
+            DPRINTF("Wrong phase got %d expected %d\n",
+                    s->sstat1 & PHASE_MASK, (insn >> 24) & 7);
+            lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
+            break;
+        }
+        s->dnad = addr;
+        switch (s->sstat1 & 0x7) {
+        case PHASE_DO:
+            lsi_do_dma(s, 1);
+            break;
+        case PHASE_DI:
+            lsi_do_dma(s, 0);
+            break;
+        case PHASE_CMD:
+            lsi_do_command(s);
+            break;
+        case PHASE_ST:
+            lsi_do_status(s);
+            break;
+        case PHASE_MO:
+            lsi_do_msgout(s);
+            break;
+        case PHASE_MI:
+            lsi_do_msgin(s);
+            break;
+        default:
+            BADF("Unimplemented phase %d\n", s->sstat1 & PHASE_MASK);
+            exit(1);
+        }
+        s->dfifo = s->dbc & 0xff;
+        s->ctest5 = (s->ctest5 & 0xfc) | ((s->dbc >> 8) & 3);
+        s->sbc = s->dbc;
+        s->rbc -= s->dbc;
+        s->ua = addr + s->dbc;
+        /* ??? Set ESA.  */
+        s->ia = s->dsp - 8;
+        break;
+
+    case 1: /* IO or Read/Write instruction.  */
+        opcode = (insn >> 27) & 7;
+        if (opcode < 5) {
+            uint32_t id;
+
+            if (insn & (1 << 25)) {
+                id = read_dword(s, s->dsa + sxt24(insn));
+            } else {
+                id = addr;
+            }
+            id = (id >> 16) & 0xf;
+            if (insn & (1 << 26)) {
+                addr = s->dsp + sxt24(addr);
+            }
+            s->dnad = addr;
+            switch (opcode) {
+            case 0: /* Select */
+                s->sstat0 |= LSI_SSTAT0_WOA;
+                s->scntl1 &= ~LSI_SCNTL1_IARB;
+                s->sdid = id;
+                if (id >= LSI_MAX_DEVS || !s->scsi_dev[id]) {
+                    DPRINTF("Selected absent target %d\n", id);
+                    lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
+                    lsi_disconnect(s);
+                    break;
+                }
+                DPRINTF("Selected target %d%s\n",
+                        id, insn & (1 << 3) ? " ATN" : "");
+                /* ??? Linux drivers compain when this is set.  Maybe
+                   it only applies in low-level mode (unimplemented).
+                lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
+                s->current_dev = s->scsi_dev[id];
+                s->scntl1 |= LSI_SCNTL1_CON;
+                if (insn & (1 << 3)) {
+                    s->socl |= LSI_SOCL_ATN;
+                }
+                lsi_set_phase(s, PHASE_MO);
+                break;
+            case 1: /* Disconnect */
+                DPRINTF("Wait Disconect\n");
+                s->scntl1 &= ~LSI_SCNTL1_CON;
+                break;
+            case 2: /* Wait Reselect */
+                DPRINTF("Wait Reselect\n");
+                s->waiting = 1;
+                break;
+            case 3: /* Set */
+                DPRINTF("Set%s%s%s%s\n",
+                        insn & (1 << 3) ? " ATN" : "",
+                        insn & (1 << 6) ? " ACK" : "",
+                        insn & (1 << 9) ? " TM" : "",
+                        insn & (1 << 10) ? " CC" : "");
+                if (insn & (1 << 3)) {
+                    s->socl |= LSI_SOCL_ATN;
+                    lsi_set_phase(s, PHASE_MO);
+                }
+                if (insn & (1 << 9)) {
+                    BADF("Target mode not implemented\n");
+                    exit(1);
+                }
+                if (insn & (1 << 10))
+                    s->carry = 1;
+                break;
+            case 4: /* Clear */
+                DPRINTF("Clear%s%s%s%s\n",
+                        insn & (1 << 3) ? " ATN" : "",
+                        insn & (1 << 6) ? " ACK" : "",
+                        insn & (1 << 9) ? " TM" : "",
+                        insn & (1 << 10) ? " CC" : "");
+                if (insn & (1 << 3)) {
+                    s->socl &= ~LSI_SOCL_ATN;
+                }
+                if (insn & (1 << 10))
+                    s->carry = 0;
+                break;
+            }
+        } else {
+            uint8_t op0;
+            uint8_t op1;
+            uint8_t data8;
+            int reg;
+            int operator;
+#ifdef DEBUG_LSI
+            static const char *opcode_names[3] =
+                {"Write", "Read", "Read-Modify-Write"};
+            static const char *operator_names[8] =
+                {"MOV", "SHL", "OR", "XOR", "AND", "SHR", "ADD", "ADC"};
+#endif
+
+            reg = ((insn >> 16) & 0x7f) | (insn & 0x80);
+            data8 = (insn >> 8) & 0xff;
+            opcode = (insn >> 27) & 7;
+            operator = (insn >> 24) & 7;
+            DPRINTF("%s reg 0x%x %s data8 %d%s\n",
+                    opcode_names[opcode - 5], reg,
+                    operator_names[operator], data8,
+                    (insn & (1 << 23)) ? " SFBR" : "");
+            op0 = op1 = 0;
+            switch (opcode) {
+            case 5: /* From SFBR */
+                op0 = s->sfbr;
+                op1 = data8;
+                break;
+            case 6: /* To SFBR */
+                if (operator)
+                    op0 = lsi_reg_readb(s, reg);
+                op1 = data8;
+                break;
+            case 7: /* Read-modify-write */
+                if (operator)
+                    op0 = lsi_reg_readb(s, reg);
+                if (insn & (1 << 23)) {
+                    op1 = s->sfbr;
+                } else {
+                    op1 = data8;
+                }
+                break;
+            }
+
+            switch (operator) {
+            case 0: /* move */
+                op0 = op1;
+                break;
+            case 1: /* Shift left */
+                op1 = op0 >> 7;
+                op0 = (op0 << 1) | s->carry;
+                s->carry = op1;
+                break;
+            case 2: /* OR */
+                op0 |= op1;
+                break;
+            case 3: /* XOR */
+                op0 |= op1;
+                break;
+            case 4: /* AND */
+                op0 &= op1;
+                break;
+            case 5: /* SHR */
+                op1 = op0 & 1;
+                op0 = (op0 >> 1) | (s->carry << 7);
+                break;
+            case 6: /* ADD */
+                op0 += op1;
+                s->carry = op0 < op1;
+                break;
+            case 7: /* ADC */
+                op0 += op1 + s->carry;
+                if (s->carry)
+                    s->carry = op0 <= op1;
+                else
+                    s->carry = op0 < op1;
+                break;
+            }
+
+            switch (opcode) {
+            case 5: /* From SFBR */
+            case 7: /* Read-modify-write */
+                lsi_reg_writeb(s, reg, op0);
+                break;
+            case 6: /* To SFBR */
+                s->sfbr = op0;
+                break;
+            }
+        }
+        break;
+
+    case 2: /* Transfer Control.  */
+        {
+            int cond;
+            int jmp;
+
+            if ((insn & 0x002e0000) == 0) {
+                DPRINTF("NOP\n");
+                break;
+            }
+            if (s->sist1 & LSI_SIST1_STO) {
+                DPRINTF("Delayed select timeout\n");
+                lsi_stop_script(s);
+                break;
+            }
+            cond = jmp = (insn & (1 << 19)) != 0;
+            if (cond == jmp && (insn & (1 << 21))) {
+                DPRINTF("Compare carry %d\n", s->carry == jmp);
+                cond = s->carry != 0;
+            }
+            if (cond == jmp && (insn & (1 << 17))) {
+                DPRINTF("Compare phase %d %c= %d\n",
+                        (s->sstat1 & PHASE_MASK),
+                        jmp ? '=' : '!',
+                        ((insn >> 24) & 7));
+                cond = (s->sstat1 & PHASE_MASK) == ((insn >> 24) & 7);
+            }
+            if (cond == jmp && (insn & (1 << 18))) {
+                uint8_t mask;
+
+                mask = (~insn >> 8) & 0xff;
+                DPRINTF("Compare data 0x%x & 0x%x %c= 0x%x\n",
+                        s->sfbr, mask, jmp ? '=' : '!', insn & mask);
+                cond = (s->sfbr & mask) == (insn & mask);
+            }
+            if (cond == jmp) {
+                if (insn & (1 << 23)) {
+                    /* Relative address.  */
+                    addr = s->dsp + sxt24(addr);
+                }
+                switch ((insn >> 27) & 7) {
+                case 0: /* Jump */
+                    DPRINTF("Jump to 0x%08x\n", addr);
+                    s->dsp = addr;
+                    break;
+                case 1: /* Call */
+                    DPRINTF("Call 0x%08x\n", addr);
+                    s->temp = s->dsp;
+                    s->dsp = addr;
+                    break;
+                case 2: /* Return */
+                    DPRINTF("Return to 0x%08x\n", s->temp);
+                    s->dsp = s->temp;
+                    break;
+                case 3: /* Interrupt */
+                    DPRINTF("Interrupt 0x%08x\n", s->dsps);
+                    if ((insn & (1 << 20)) != 0) {
+                        s->istat0 |= LSI_ISTAT0_INTF;
+                        lsi_update_irq(s);
+                    } else {
+                        lsi_script_dma_interrupt(s, LSI_DSTAT_SIR);
+                    }
+                    break;
+                default:
+                    DPRINTF("Illegal transfer control\n");
+                    lsi_script_dma_interrupt(s, LSI_DSTAT_IID);
+                    break;
+                }
+            } else {
+                DPRINTF("Control condition failed\n");
+            }
+        }
+        break;
+
+    case 3:
+        if ((insn & (1 << 29)) == 0) {
+            /* Memory move.  */
+            uint32_t dest;
+            /* ??? The docs imply the destination address is loaded into
+               the TEMP register.  However the Linux drivers rely on
+               the value being presrved.  */
+            dest = read_dword(s, s->dsp);
+            s->dsp += 4;
+            lsi_memcpy(s, dest, addr, insn & 0xffffff);
+        } else {
+            uint8_t data[7];
+            int reg;
+            int n;
+            int i;
+
+            if (insn & (1 << 28)) {
+                addr = s->dsa + sxt24(addr);
+            }
+            n = (insn & 7);
+            reg = (insn >> 16) & 0xff;
+            if (insn & (1 << 24)) {
+                DPRINTF("Load reg 0x%x size %d addr 0x%08x\n", reg, n, addr);
+                cpu_physical_memory_read(addr, data, n);
+                for (i = 0; i < n; i++) {
+                    lsi_reg_writeb(s, reg + i, data[i]);
+                }
+            } else {
+                DPRINTF("Store reg 0x%x size %d addr 0x%08x\n", reg, n, addr);
+                for (i = 0; i < n; i++) {
+                    data[i] = lsi_reg_readb(s, reg + i);
+                }
+                cpu_physical_memory_write(addr, data, n);
+            }
+        }
+    }
+    /* ??? Need to avoid infinite loops.  */
+    if (s->istat1 & LSI_ISTAT1_SRUN && !s->waiting) {
+        if (s->dcntl & LSI_DCNTL_SSM) {
+            lsi_script_dma_interrupt(s, LSI_DSTAT_SSI);
+        } else {
+            goto again;
+        }
+    }
+    DPRINTF("SCRIPTS execution stopped\n");
+}
+
+static uint8_t lsi_reg_readb(LSIState *s, int offset)
+{
+    uint8_t tmp;
+#define CASE_GET_REG32(name, addr) \
+    case addr: return s->name & 0xff; \
+    case addr + 1: return (s->name >> 8) & 0xff; \
+    case addr + 2: return (s->name >> 16) & 0xff; \
+    case addr + 3: return (s->name >> 24) & 0xff;
+
+#ifdef DEBUG_LSI_REG
+    DPRINTF("Read reg %x\n", offset);
+#endif
+    switch (offset) {
+    case 0x00: /* SCNTL0 */
+        return s->scntl0;
+    case 0x01: /* SCNTL1 */
+        return s->scntl1;
+    case 0x02: /* SCNTL2 */
+        return s->scntl2;
+    case 0x03: /* SCNTL3 */
+        return s->scntl3;
+    case 0x04: /* SCID */
+        return s->scid;
+    case 0x05: /* SXFER */
+        return s->sxfer;
+    case 0x06: /* SDID */
+        return s->sdid;
+    case 0x07: /* GPREG0 */
+        return 0x7f;
+    case 0xb: /* SBCL */
+        /* ??? This is not correct. However it's (hopefully) only
+           used for diagnostics, so should be ok.  */
+        return 0;
+    case 0xc: /* DSTAT */
+        tmp = s->dstat | 0x80;
+        if ((s->istat0 & LSI_ISTAT0_INTF) == 0)
+            s->dstat = 0;
+        lsi_update_irq(s);
+        return tmp;
+    case 0x0d: /* SSTAT0 */
+        return s->sstat0;
+    case 0x0e: /* SSTAT1 */
+        return s->sstat1;
+    case 0x0f: /* SSTAT2 */
+        return s->scntl1 & LSI_SCNTL1_CON ? 0 : 2;
+    CASE_GET_REG32(dsa, 0x10)
+    case 0x14: /* ISTAT0 */
+        return s->istat0;
+    case 0x16: /* MBOX0 */
+        return s->mbox0;
+    case 0x17: /* MBOX1 */
+        return s->mbox1;
+    case 0x18: /* CTEST0 */
+        return 0xff;
+    case 0x19: /* CTEST1 */
+        return 0;
+    case 0x1a: /* CTEST2 */
+        tmp = LSI_CTEST2_DACK | LSI_CTEST2_CM;
+        if (s->istat0 & LSI_ISTAT0_SIGP) {
+            s->istat0 &= ~LSI_ISTAT0_SIGP;
+            tmp |= LSI_CTEST2_SIGP;
+        }
+        return tmp;
+    case 0x1b: /* CTEST3 */
+        return s->ctest3;
+    CASE_GET_REG32(temp, 0x1c)
+    case 0x20: /* DFIFO */
+        return 0;
+    case 0x21: /* CTEST4 */
+        return s->ctest4;
+    case 0x22: /* CTEST5 */
+        return s->ctest5;
+    case 0x24: /* DBC[0:7] */
+        return s->dbc & 0xff;
+    case 0x25: /* DBC[8:15] */
+        return (s->dbc >> 8) & 0xff;
+    case 0x26: /* DBC[16->23] */
+        return (s->dbc >> 16) & 0xff;
+    case 0x27: /* DCMD */
+        return s->dcmd;
+    CASE_GET_REG32(dsp, 0x2c)
+    CASE_GET_REG32(dsps, 0x30)
+    CASE_GET_REG32(scratch[0], 0x34)
+    case 0x38: /* DMODE */
+        return s->dmode;
+    case 0x39: /* DIEN */
+        return s->dien;
+    case 0x3b: /* DCNTL */
+        return s->dcntl;
+    case 0x40: /* SIEN0 */
+        return s->sien0;
+    case 0x41: /* SIEN1 */
+        return s->sien1;
+    case 0x42: /* SIST0 */
+        tmp = s->sist0;
+        s->sist0 = 0;
+        lsi_update_irq(s);
+        return tmp;
+    case 0x43: /* SIST1 */
+        tmp = s->sist1;
+        s->sist1 = 0;
+        lsi_update_irq(s);
+        return tmp;
+    case 0x47: /* GPCNTL0 */
+        return 0x0f;
+    case 0x48: /* STIME0 */
+        return s->stime0;
+    case 0x4a: /* RESPID0 */
+        return s->respid0;
+    case 0x4b: /* RESPID1 */
+        return s->respid1;
+    case 0x4d: /* STEST1 */
+        return s->stest1;
+    case 0x4e: /* STEST2 */
+        return s->stest2;
+    case 0x4f: /* STEST3 */
+        return s->stest3;
+    case 0x52: /* STEST4 */
+        return 0xe0;
+    case 0x56: /* CCNTL0 */
+        return s->ccntl0;
+    case 0x57: /* CCNTL1 */
+        return s->ccntl1;
+    case 0x58: case 0x59: /* SBDL */
+        return 0;
+    CASE_GET_REG32(mmrs, 0xa0)
+    CASE_GET_REG32(mmws, 0xa4)
+    CASE_GET_REG32(sfs, 0xa8)
+    CASE_GET_REG32(drs, 0xac)
+    CASE_GET_REG32(sbms, 0xb0)
+    CASE_GET_REG32(dmbs, 0xb4)
+    CASE_GET_REG32(dnad64, 0xb8)
+    CASE_GET_REG32(pmjad1, 0xc0)
+    CASE_GET_REG32(pmjad2, 0xc4)
+    CASE_GET_REG32(rbc, 0xc8)
+    CASE_GET_REG32(ua, 0xcc)
+    CASE_GET_REG32(ia, 0xd4)
+    CASE_GET_REG32(sbc, 0xd8)
+    CASE_GET_REG32(csbc, 0xdc)
+    }
+    if (offset >= 0x5c && offset < 0xa0) {
+        int n;
+        int shift;
+        n = (offset - 0x58) >> 2;
+        shift = (offset & 3) * 8;
+        return (s->scratch[n] >> shift) & 0xff;
+    }
+    BADF("readb 0x%x\n", offset);
+    exit(1);
+#undef CASE_GET_REG32
+}
+
+static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
+{
+#define CASE_SET_REG32(name, addr) \
+    case addr    : s->name &= 0xffffff00; s->name |= val;       break; \
+    case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8;  break; \
+    case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; \
+    case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break;
+
+#ifdef DEBUG_LSI_REG
+    DPRINTF("Write reg %x = %02x\n", offset, val);
+#endif
+    switch (offset) {
+    case 0x00: /* SCNTL0 */
+        s->scntl0 = val;
+        if (val & LSI_SCNTL0_START) {
+            BADF("Start sequence not implemented\n");
+        }
+        break;
+    case 0x01: /* SCNTL1 */
+        s->scntl1 = val & ~LSI_SCNTL1_SST;
+        if (val & LSI_SCNTL1_IARB) {
+            BADF("Immediate Arbritration not implemented\n");
+        }
+        if (val & LSI_SCNTL1_RST) {
+            s->sstat0 |= LSI_SSTAT0_RST;
+            lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0);
+        } else {
+            s->sstat0 &= ~LSI_SSTAT0_RST;
+        }
+        break;
+    case 0x02: /* SCNTL2 */
+        val &= ~(LSI_SCNTL2_WSR | LSI_SCNTL2_WSS);
+        s->scntl3 = val;
+        break;
+    case 0x03: /* SCNTL3 */
+        s->scntl3 = val;
+        break;
+    case 0x04: /* SCID */
+        s->scid = val;
+        break;
+    case 0x05: /* SXFER */
+        s->sxfer = val;
+        break;
+    case 0x07: /* GPREG0 */
+        break;
+    case 0x0c: case 0x0d: case 0x0e: case 0x0f:
+        /* Linux writes to these readonly registers on startup.  */
+        return;
+    CASE_SET_REG32(dsa, 0x10)
+    case 0x14: /* ISTAT0 */
+        s->istat0 = (s->istat0 & 0x0f) | (val & 0xf0);
+        if (val & LSI_ISTAT0_ABRT) {
+            lsi_script_dma_interrupt(s, LSI_DSTAT_ABRT);
+        }
+        if (val & LSI_ISTAT0_INTF) {
+            s->istat0 &= ~LSI_ISTAT0_INTF;
+            lsi_update_irq(s);
+        }
+        if (s->waiting && val & LSI_ISTAT0_SIGP) {
+            DPRINTF("Woken by SIGP\n");
+            s->waiting = 0;
+            s->dsp = s->dnad;
+            lsi_execute_script(s);
+        }
+        if (val & LSI_ISTAT0_SRST) {
+            lsi_soft_reset(s);
+        }
+    case 0x16: /* MBOX0 */
+        s->mbox0 = val;
+    case 0x17: /* MBOX1 */
+        s->mbox1 = val;
+    case 0x1b: /* CTEST3 */
+        s->ctest3 = val & 0x0f;
+        break;
+    CASE_SET_REG32(temp, 0x1c)
+    case 0x21: /* CTEST4 */
+        if (val & 7) {
+           BADF("Unimplemented CTEST4-FBL 0x%x\n", val);
+        }
+        s->ctest4 = val;
+        break;
+    case 0x22: /* CTEST5 */
+        if (val & (LSI_CTEST5_ADCK | LSI_CTEST5_BBCK)) {
+            BADF("CTEST5 DMA increment not implemented\n");
+        }
+        s->ctest5 = val;
+        break;
+    case 0x2c: /* DSPS[0:7] */
+        s->dsp &= 0xffffff00;
+        s->dsp |= val;
+        break;
+    case 0x2d: /* DSPS[8:15] */
+        s->dsp &= 0xffff00ff;
+        s->dsp |= val << 8;
+        break;
+    case 0x2e: /* DSPS[16:23] */
+        s->dsp &= 0xff00ffff;
+        s->dsp |= val << 16;
+        break;
+    case 0x2f: /* DSPS[14:31] */
+        s->dsp &= 0x00ffffff;
+        s->dsp |= val << 24;
+        if ((s->dmode & LSI_DMODE_MAN) == 0
+            && (s->istat1 & LSI_ISTAT1_SRUN) == 0)
+            lsi_execute_script(s);
+        break;
+    CASE_SET_REG32(dsps, 0x30)
+    CASE_SET_REG32(scratch[0], 0x34)
+    case 0x38: /* DMODE */
+        if (val & (LSI_DMODE_SIOM | LSI_DMODE_DIOM)) {
+            BADF("IO mappings not implemented\n");
+        }
+        s->dmode = val;
+        break;
+    case 0x39: /* DIEN */
+        s->dien = val;
+        lsi_update_irq(s);
+        break;
+    case 0x3b: /* DCNTL */
+        s->dcntl = val & ~(LSI_DCNTL_PFF | LSI_DCNTL_STD);
+        if ((val & LSI_DCNTL_STD) && (s->istat1 & LSI_ISTAT1_SRUN) == 0)
+            lsi_execute_script(s);
+        break;
+    case 0x40: /* SIEN0 */
+        s->sien0 = val;
+        lsi_update_irq(s);
+        break;
+    case 0x41: /* SIEN1 */
+        s->sien1 = val;
+        lsi_update_irq(s);
+        break;
+    case 0x47: /* GPCNTL0 */
+        break;
+    case 0x48: /* STIME0 */
+        s->stime0 = val;
+        break;
+    case 0x49: /* STIME1 */
+        if (val & 0xf) {
+            DPRINTF("General purpose timer not implemented\n");
+            /* ??? Raising the interrupt immediately seems to be sufficient
+               to keep the FreeBSD driver happy.  */
+            lsi_script_scsi_interrupt(s, 0, LSI_SIST1_GEN);
+        }
+        break;
+    case 0x4a: /* RESPID0 */
+        s->respid0 = val;
+        break;
+    case 0x4b: /* RESPID1 */
+        s->respid1 = val;
+        break;
+    case 0x4d: /* STEST1 */
+        s->stest1 = val;
+        break;
+    case 0x4e: /* STEST2 */
+        if (val & 1) {
+            BADF("Low level mode not implemented\n");
+        }
+        s->stest2 = val;
+        break;
+    case 0x4f: /* STEST3 */
+        if (val & 0x41) {
+            BADF("SCSI FIFO test mode not implemented\n");
+        }
+        s->stest3 = val;
+        break;
+    case 0x56: /* CCNTL0 */
+        s->ccntl0 = val;
+        break;
+    case 0x57: /* CCNTL1 */
+        s->ccntl1 = val;
+        break;
+    CASE_SET_REG32(mmrs, 0xa0)
+    CASE_SET_REG32(mmws, 0xa4)
+    CASE_SET_REG32(sfs, 0xa8)
+    CASE_SET_REG32(drs, 0xac)
+    CASE_SET_REG32(sbms, 0xb0)
+    CASE_SET_REG32(dmbs, 0xb4)
+    CASE_SET_REG32(dnad64, 0xb8)
+    CASE_SET_REG32(pmjad1, 0xc0)
+    CASE_SET_REG32(pmjad2, 0xc4)
+    CASE_SET_REG32(rbc, 0xc8)
+    CASE_SET_REG32(ua, 0xcc)
+    CASE_SET_REG32(ia, 0xd4)
+    CASE_SET_REG32(sbc, 0xd8)
+    CASE_SET_REG32(csbc, 0xdc)
+    default:
+        if (offset >= 0x5c && offset < 0xa0) {
+            int n;
+            int shift;
+            n = (offset - 0x58) >> 2;
+            shift = (offset & 3) * 8;
+            s->scratch[n] &= ~(0xff << shift);
+            s->scratch[n] |= (val & 0xff) << shift;
+        } else {
+            BADF("Unhandled writeb 0x%x = 0x%x\n", offset, val);
+        }
+    }
+#undef CASE_SET_REG32
+}
+
+static void lsi_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    lsi_reg_writeb(s, addr & 0xff, val);
+}
+
+static void lsi_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    addr &= 0xff;
+    lsi_reg_writeb(s, addr, val & 0xff);
+    lsi_reg_writeb(s, addr + 1, (val >> 8) & 0xff);
+}
+
+static void lsi_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    addr &= 0xff;
+    lsi_reg_writeb(s, addr, val & 0xff);
+    lsi_reg_writeb(s, addr + 1, (val >> 8) & 0xff);
+    lsi_reg_writeb(s, addr + 2, (val >> 16) & 0xff);
+    lsi_reg_writeb(s, addr + 3, (val >> 24) & 0xff);
+}
+
+static uint32_t lsi_mmio_readb(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    return lsi_reg_readb(s, addr & 0xff);
+}
+
+static uint32_t lsi_mmio_readw(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+
+    addr &= 0xff;
+    val = lsi_reg_readb(s, addr);
+    val |= lsi_reg_readb(s, addr + 1) << 8;
+    return val;
+}
+
+static uint32_t lsi_mmio_readl(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+    addr &= 0xff;
+    val = lsi_reg_readb(s, addr);
+    val |= lsi_reg_readb(s, addr + 1) << 8;
+    val |= lsi_reg_readb(s, addr + 2) << 16;
+    val |= lsi_reg_readb(s, addr + 3) << 24;
+    return val;
+}
+
+static CPUReadMemoryFunc *lsi_mmio_readfn[3] = {
+    lsi_mmio_readb,
+    lsi_mmio_readw,
+    lsi_mmio_readl,
+};
+
+static CPUWriteMemoryFunc *lsi_mmio_writefn[3] = {
+    lsi_mmio_writeb,
+    lsi_mmio_writew,
+    lsi_mmio_writel,
+};
+
+static void lsi_ram_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t newval;
+    int shift;
+
+    addr &= 0x1fff;
+    newval = s->script_ram[addr >> 2];
+    shift = (addr & 3) * 8;
+    newval &= ~(0xff << shift);
+    newval |= val << shift;
+    s->script_ram[addr >> 2] = newval;
+}
+
+static void lsi_ram_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t newval;
+
+    addr &= 0x1fff;
+    newval = s->script_ram[addr >> 2];
+    if (addr & 2) {
+        newval = (newval & 0xffff) | (val << 16);
+    } else {
+        newval = (newval & 0xffff0000) | val;
+    }
+    s->script_ram[addr >> 2] = newval;
+}
+
+
+static void lsi_ram_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    addr &= 0x1fff;
+    s->script_ram[addr >> 2] = val;
+}
+
+static uint32_t lsi_ram_readb(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+
+    addr &= 0x1fff;
+    val = s->script_ram[addr >> 2];
+    val >>= (addr & 3) * 8;
+    return val & 0xff;
+}
+
+static uint32_t lsi_ram_readw(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+
+    addr &= 0x1fff;
+    val = s->script_ram[addr >> 2];
+    if (addr & 2)
+        val >>= 16;
+    return le16_to_cpu(val);
+}
+
+static uint32_t lsi_ram_readl(void *opaque, target_phys_addr_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    addr &= 0x1fff;
+    return le32_to_cpu(s->script_ram[addr >> 2]);
+}
+
+static CPUReadMemoryFunc *lsi_ram_readfn[3] = {
+    lsi_ram_readb,
+    lsi_ram_readw,
+    lsi_ram_readl,
+};
+
+static CPUWriteMemoryFunc *lsi_ram_writefn[3] = {
+    lsi_ram_writeb,
+    lsi_ram_writew,
+    lsi_ram_writel,
+};
+
+static uint32_t lsi_io_readb(void *opaque, uint32_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    return lsi_reg_readb(s, addr & 0xff);
+}
+
+static uint32_t lsi_io_readw(void *opaque, uint32_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+    addr &= 0xff;
+    val = lsi_reg_readb(s, addr);
+    val |= lsi_reg_readb(s, addr + 1) << 8;
+    return val;
+}
+
+static uint32_t lsi_io_readl(void *opaque, uint32_t addr)
+{
+    LSIState *s = (LSIState *)opaque;
+    uint32_t val;
+    addr &= 0xff;
+    val = lsi_reg_readb(s, addr);
+    val |= lsi_reg_readb(s, addr + 1) << 8;
+    val |= lsi_reg_readb(s, addr + 2) << 16;
+    val |= lsi_reg_readb(s, addr + 3) << 24;
+    return val;
+}
+
+static void lsi_io_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+    lsi_reg_writeb(s, addr & 0xff, val);
+}
+
+static void lsi_io_writew(void *opaque, uint32_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+    addr &= 0xff;
+    lsi_reg_writeb(s, addr, val & 0xff);
+    lsi_reg_writeb(s, addr + 1, (val >> 8) & 0xff);
+}
+
+static void lsi_io_writel(void *opaque, uint32_t addr, uint32_t val)
+{
+    LSIState *s = (LSIState *)opaque;
+    addr &= 0xff;
+    lsi_reg_writeb(s, addr, val & 0xff);
+    lsi_reg_writeb(s, addr + 1, (val >> 8) & 0xff);
+    lsi_reg_writeb(s, addr + 2, (val >> 16) & 0xff);
+    lsi_reg_writeb(s, addr + 2, (val >> 24) & 0xff);
+}
+
+static void lsi_io_mapfunc(PCIDevice *pci_dev, int region_num, 
+                           uint32_t addr, uint32_t size, int type)
+{
+    LSIState *s = (LSIState *)pci_dev;
+
+    DPRINTF("Mapping IO at %08x\n", addr);
+
+    register_ioport_write(addr, 256, 1, lsi_io_writeb, s);
+    register_ioport_read(addr, 256, 1, lsi_io_readb, s);
+    register_ioport_write(addr, 256, 2, lsi_io_writew, s);
+    register_ioport_read(addr, 256, 2, lsi_io_readw, s);
+    register_ioport_write(addr, 256, 4, lsi_io_writel, s);
+    register_ioport_read(addr, 256, 4, lsi_io_readl, s);
+}
+
+static void lsi_ram_mapfunc(PCIDevice *pci_dev, int region_num, 
+                            uint32_t addr, uint32_t size, int type)
+{
+    LSIState *s = (LSIState *)pci_dev;
+
+    DPRINTF("Mapping ram at %08x\n", addr);
+    s->script_ram_base = addr;
+    cpu_register_physical_memory(addr + 0, 0x2000, s->ram_io_addr);
+}
+
+static void lsi_mmio_mapfunc(PCIDevice *pci_dev, int region_num, 
+                             uint32_t addr, uint32_t size, int type)
+{
+    LSIState *s = (LSIState *)pci_dev;
+
+    DPRINTF("Mapping registers at %08x\n", addr);
+    cpu_register_physical_memory(addr + 0, 0x400, s->mmio_io_addr);
+}
+
+void lsi_scsi_attach(void *opaque, BlockDriverState *bd, int id)
+{
+    LSIState *s = (LSIState *)opaque;
+
+    if (id < 0) {
+        for (id = 0; id < LSI_MAX_DEVS; id++) {
+            if (s->scsi_dev[id] == NULL)
+                break;
+        }
+    }
+    if (id >= LSI_MAX_DEVS) {
+        BADF("Bad Device ID %d\n", id);
+        return;
+    }
+    if (s->scsi_dev[id]) {
+        DPRINTF("Destroying device %d\n", id);
+        scsi_disk_destroy(s->scsi_dev[id]);
+    }
+    DPRINTF("Attaching block device %d\n", id);
+    s->scsi_dev[id] = scsi_disk_init(bd, lsi_command_complete, s);
+}
+
+void *lsi_scsi_init(PCIBus *bus, int devfn)
+{
+    LSIState *s;
+
+    s = (LSIState *)pci_register_device(bus, "LSI53C895A SCSI HBA",
+                                        sizeof(*s), devfn, NULL, NULL);
+    if (s == NULL) {
+        fprintf(stderr, "lsi-scsi: Failed to register PCI device\n");
+        return NULL;
+    }
+
+    s->pci_dev.config[0x00] = 0x00;
+    s->pci_dev.config[0x01] = 0x10;
+    s->pci_dev.config[0x02] = 0x12;
+    s->pci_dev.config[0x03] = 0x00;
+    s->pci_dev.config[0x0b] = 0x01;
+    s->pci_dev.config[0x3d] = 0x01; /* interrupt pin 1 */
+
+    s->mmio_io_addr = cpu_register_io_memory(0, lsi_mmio_readfn,
+                                             lsi_mmio_writefn, s);
+    s->ram_io_addr = cpu_register_io_memory(0, lsi_ram_readfn,
+                                            lsi_ram_writefn, s);
+
+    pci_register_io_region((struct PCIDevice *)s, 0, 256,
+                           PCI_ADDRESS_SPACE_IO, lsi_io_mapfunc);
+    pci_register_io_region((struct PCIDevice *)s, 1, 0x400,
+                           PCI_ADDRESS_SPACE_MEM, lsi_mmio_mapfunc);
+    pci_register_io_region((struct PCIDevice *)s, 2, 0x2000,
+                           PCI_ADDRESS_SPACE_MEM, lsi_ram_mapfunc);
+
+    lsi_soft_reset(s);
+
+    return s;
+}
+
diff --git a/hw/pc.c b/hw/pc.c
index f9a7e86371..b722190277 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -838,6 +838,24 @@ static void pc_init1(int ram_size, int vga_ram_size, int boot_device,
     if (pci_enabled && acpi_enabled) {
         piix4_pm_init(pci_bus, piix3_devfn + 3);
     }
+
+#if 0
+    /* ??? Need to figure out some way for the user to
+       specify SCSI devices.  */
+    if (pci_enabled) {
+        void *scsi;
+        BlockDriverState *bdrv;
+
+        scsi = lsi_scsi_init(pci_bus, -1);
+        bdrv = bdrv_new("scsidisk");
+        bdrv_open(bdrv, "scsi_disk.img", 0);
+        lsi_scsi_attach(scsi, bdrv, -1);
+        bdrv = bdrv_new("scsicd");
+        bdrv_open(bdrv, "scsi_cd.iso", 0);
+        bdrv_set_type_hint(bdrv, BDRV_TYPE_CDROM);
+        lsi_scsi_attach(scsi, bdrv, -1);
+    }
+#endif
     /* must be done after all PCI devices are instanciated */
     /* XXX: should be done in the Bochs BIOS */
     if (pci_enabled) {
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index c15486b2bf..2268401579 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -245,7 +245,7 @@ int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
         s->buf_len = 4;
         break;
     case 0x12:
-	DPRINTF("Inquiry (len %d)\n", len);
+        DPRINTF("Inquiry (len %d)\n", len);
         if (len < 36) {
             BADF("Inquiry buffer too small (%d)\n", len);
         }
@@ -253,12 +253,13 @@ int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
 	if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
 	    s->buf[0] = 5;
             s->buf[1] = 0x80;
-	    memcpy(&s->buf[16], "QEMU CDROM     ", 16);
+	    memcpy(&s->buf[16], "QEMU CD-ROM    ", 16);
 	} else {
 	    s->buf[0] = 0;
 	    memcpy(&s->buf[16], "QEMU HARDDISK  ", 16);
 	}
 	memcpy(&s->buf[8], "QEMU   ", 8);
+        memcpy(&s->buf[32], QEMU_VERSION, 4);
 	s->buf[2] = 3; /* SCSI-3 */
 	s->buf[3] = 2; /* Format 2 */
 	s->buf[4] = 32;
@@ -275,18 +276,27 @@ int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
             goto fail;
         break;
     case 0x1a:
-	DPRINTF("Mode Sense(6) (page %d, len %d)\n", buf[2], len);
-        memset(s->buf, 0, 4);
-        s->buf[0] = 0x16; /* Mode data length (4 + 0x12).  */
-        s->buf[1] = 0; /* Default media type.  */
-        s->buf[2] = 0; /* Write enabled.  */
-        s->buf[3] = 0; /* Block descriptor length.  */
-        /* Caching page.  */
-        s->buf[4 + 0] = 8;
-        s->buf[4 + 1] = 0x12;
-        s->buf[4 + 2] = 4; /* WCE */
-        if (len > 0x16)
-            len = 0x16;
+    case 0x5a:
+	DPRINTF("Mode Sense (page %d, len %d)\n", buf[2], len);
+        if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
+            memset(s->buf, 0, 4);
+            s->buf[0] = 4; /* Mode data length.  */
+            s->buf[1] = 0; /* Default media type.  */
+            s->buf[2] = 0x80; /* Readonly.  */
+            s->buf[3] = 0; /* Block descriptor length.  */
+        } else {
+            memset(s->buf, 0, 0x16);
+            s->buf[0] = 0x16; /* Mode data length (4 + 0x12).  */
+            s->buf[1] = 0; /* Default media type.  */
+            s->buf[2] = 0; /* Write enabled.  */
+            s->buf[3] = 0; /* Block descriptor length.  */
+            /* Caching page.  */
+            s->buf[4 + 0] = 8;
+            s->buf[4 + 1] = 0x12;
+            s->buf[4 + 2] = 4; /* WCE */
+            if (len > 0x16)
+                len = 0x16;
+        }
         s->buf_len = len;
 	break;
     case 0x25:
@@ -317,6 +327,10 @@ int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
         s->sector_count = len * s->cluster_size;
         is_write = 1;
         break;
+    case 0x35:
+        DPRINTF("Syncronise cache (sector %d, count %d)\n", lba, len);
+        /* ??? Extend block layer and use fsync to implement this.  */
+        break;
     case 0x43:
         {
             int start_track, format, msf, toclen;
diff --git a/hw/versatilepb.c b/hw/versatilepb.c
index c22e38a96d..28ec1374ba 100644
--- a/hw/versatilepb.c
+++ b/hw/versatilepb.c
@@ -343,6 +343,7 @@ static void versatile_init(int ram_size, int vga_ram_size, int boot_device,
     CPUState *env;
     void *pic;
     void *sic;
+    void *scsi_hba;
     PCIBus *pci_bus;
     NICInfo *nd;
     int n;
@@ -377,6 +378,12 @@ static void versatile_init(int ram_size, int vga_ram_size, int boot_device,
     if (usb_enabled) {
         usb_ohci_init(pci_bus, 3, -1);
     }
+    scsi_hba = lsi_scsi_init(pci_bus, -1);
+    for (n = 0; n < MAX_DISKS; n++) {
+        if (bs_table[n]) {
+            lsi_scsi_attach(scsi_hba, bs_table[n], n);
+        }
+    }
 
     pl011_init(0x101f1000, pic, 12, serial_hds[0]);
     pl011_init(0x101f2000, pic, 13, serial_hds[1]);