bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses

PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's
endianness, whereas device model code should be independent of
it. This changes the relevant Raspberry Pi devices to explicitly call
the little-endian variants.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

2 files changed, 22 insertions, 22 deletions

diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c
index 500baba7c0..106585a7bf 100644
--- a/hw/misc/bcm2835_mbox.c
+++ b/hw/misc/bcm2835_mbox.c
@@ -98,7 +98,7 @@ static void bcm2835_mbox_update(BCM2835MboxState *s)
      */
     for (n = 0; n < MBOX_CHAN_COUNT; n++) {
         while (s->available[n] && !(s->mbox[0].status & ARM_MS_FULL)) {
-            value = ldl_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT);
+            value = ldl_le_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT);
             assert(value != MBOX_INVALID_DATA); /* Pending interrupt but no data */
             mbox_push(&s->mbox[0], value);
         }
@@ -207,12 +207,12 @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset,
             ch = value & 0xf;
             if (ch < MBOX_CHAN_COUNT) {
                 childaddr = ch << MBOX_AS_CHAN_SHIFT;
-                if (ldl_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) {
+                if (ldl_le_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) {
                     /* Child busy, push delayed. Push it in the arm->vc mbox */
                     mbox_push(&s->mbox[1], value);
                 } else {
                     /* Push it directly to the child device */
-                    stl_phys(&s->mbox_as, childaddr, value);
+                    stl_le_phys(&s->mbox_as, childaddr, value);
                 }
             } else {
                 /* Invalid channel number */
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 581922abd7..41fbbe3e7f 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -22,20 +22,20 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
 
     s->addr = value;
 
-    tot_len = ldl_phys(&s->dma_as, value);
+    tot_len = ldl_le_phys(&s->dma_as, value);
 
     /* @(addr + 4) : Buffer response code */
     value = s->addr + 8;
     while (value + 8 <= s->addr + tot_len) {
-        tag = ldl_phys(&s->dma_as, value);
-        bufsize = ldl_phys(&s->dma_as, value + 4);
+        tag = ldl_le_phys(&s->dma_as, value);
+        bufsize = ldl_le_phys(&s->dma_as, value + 4);
         /* @(value + 8) : Request/response indicator */
         resplen = 0;
         switch (tag) {
         case 0x00000000: /* End tag */
             break;
         case 0x00000001: /* Get firmware revision */
-            stl_phys(&s->dma_as, value + 12, 346337);
+            stl_le_phys(&s->dma_as, value + 12, 346337);
             resplen = 4;
             break;
         case 0x00010001: /* Get board model */
@@ -44,7 +44,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
             resplen = 4;
             break;
         case 0x00010002: /* Get board revision */
-            stl_phys(&s->dma_as, value + 12, s->board_rev);
+            stl_le_phys(&s->dma_as, value + 12, s->board_rev);
             resplen = 4;
             break;
         case 0x00010003: /* Get board MAC address */
@@ -58,24 +58,24 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
             break;
         case 0x00010005: /* Get ARM memory */
             /* base */
-            stl_phys(&s->dma_as, value + 12, 0);
+            stl_le_phys(&s->dma_as, value + 12, 0);
             /* size */
-            stl_phys(&s->dma_as, value + 16, s->ram_size);
+            stl_le_phys(&s->dma_as, value + 16, s->ram_size);
             resplen = 8;
             break;
         case 0x00028001: /* Set power state */
             /* Assume that whatever device they asked for exists,
              * and we'll just claim we set it to the desired state
              */
-            tmp = ldl_phys(&s->dma_as, value + 16);
-            stl_phys(&s->dma_as, value + 16, (tmp & 1));
+            tmp = ldl_le_phys(&s->dma_as, value + 16);
+            stl_le_phys(&s->dma_as, value + 16, (tmp & 1));
             resplen = 8;
             break;
 
         /* Clocks */
 
         case 0x00030001: /* Get clock state */
-            stl_phys(&s->dma_as, value + 16, 0x1);
+            stl_le_phys(&s->dma_as, value + 16, 0x1);
             resplen = 8;
             break;
 
@@ -88,15 +88,15 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
         case 0x00030002: /* Get clock rate */
         case 0x00030004: /* Get max clock rate */
         case 0x00030007: /* Get min clock rate */
-            switch (ldl_phys(&s->dma_as, value + 12)) {
+            switch (ldl_le_phys(&s->dma_as, value + 12)) {
             case 1: /* EMMC */
-                stl_phys(&s->dma_as, value + 16, 50000000);
+                stl_le_phys(&s->dma_as, value + 16, 50000000);
                 break;
             case 2: /* UART */
-                stl_phys(&s->dma_as, value + 16, 3000000);
+                stl_le_phys(&s->dma_as, value + 16, 3000000);
                 break;
             default:
-                stl_phys(&s->dma_as, value + 16, 700000000);
+                stl_le_phys(&s->dma_as, value + 16, 700000000);
                 break;
             }
             resplen = 8;
@@ -113,19 +113,19 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
         /* Temperature */
 
         case 0x00030006: /* Get temperature */
-            stl_phys(&s->dma_as, value + 16, 25000);
+            stl_le_phys(&s->dma_as, value + 16, 25000);
             resplen = 8;
             break;
 
         case 0x0003000A: /* Get max temperature */
-            stl_phys(&s->dma_as, value + 16, 99000);
+            stl_le_phys(&s->dma_as, value + 16, 99000);
             resplen = 8;
             break;
 
 
         case 0x00060001: /* Get DMA channels */
             /* channels 2-5 */
-            stl_phys(&s->dma_as, value + 12, 0x003C);
+            stl_le_phys(&s->dma_as, value + 12, 0x003C);
             resplen = 4;
             break;
 
@@ -143,12 +143,12 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
             break;
         }
 
-        stl_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
+        stl_le_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
         value += bufsize + 12;
     }
 
     /* Buffer response code */
-    stl_phys(&s->dma_as, s->addr + 4, (1 << 31));
+    stl_le_phys(&s->dma_as, s->addr + 4, (1 << 31));
 }
 
 static uint64_t bcm2835_property_read(void *opaque, hwaddr offset,