spapr: Cleanups relating to DRC awaiting_release field

'awaiting_release' indicates that the host has requested an unplug of the
device attached to the DRC, but the guest has not (yet) put the device
into a state where it is safe to complete removal.

1. Rename it to 'unplug_requested' which to me at least is clearer

2. Remove the ->release_pending() method used to check this from outside
spapr_drc.c.  The method only plausibly has one implementation, so use
a plain function (spapr_drc_unplug_requested()) instead.

3. Remove it from the migration stream.  Attempting to migrate mid-unplug
is broken not just for spapr - in general management has no good way to
determine if the device should be present on the destination or not.  So,
until that's fixed, there's no point adding extra things to the stream.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>

2 files changed, 11 insertions, 21 deletions

diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
index 15a3d00049..03ef75c70c 100644
--- a/hw/ppc/spapr_drc.c
+++ b/hw/ppc/spapr_drc.c
@@ -66,7 +66,7 @@ static uint32_t drc_isolate_physical(sPAPRDRConnector *drc)
      * configured state, as suggested by the state diagram from PAPR+
      * 2.7, 13.4
      */
-    if (drc->awaiting_release) {
+    if (drc->unplug_requested) {
         uint32_t drc_index = spapr_drc_index(drc);
         if (drc->configured) {
             trace_spapr_drc_set_isolation_state_finalizing(drc_index);
@@ -116,7 +116,7 @@ static uint32_t drc_isolate_logical(sPAPRDRConnector *drc)
      * actually being unplugged, fail the isolation request here.
      */
     if (spapr_drc_type(drc) == SPAPR_DR_CONNECTOR_TYPE_LMB
-        && !drc->awaiting_release) {
+        && !drc->unplug_requested) {
         return RTAS_OUT_HW_ERROR;
     }
 
@@ -130,7 +130,7 @@ static uint32_t drc_isolate_logical(sPAPRDRConnector *drc)
      * configured state, as suggested by the state diagram from PAPR+
      * 2.7, 13.4
      */
-    if (drc->awaiting_release) {
+    if (drc->unplug_requested) {
         uint32_t drc_index = spapr_drc_index(drc);
         if (drc->configured) {
             trace_spapr_drc_set_isolation_state_finalizing(drc_index);
@@ -170,7 +170,7 @@ static uint32_t drc_set_usable(sPAPRDRConnector *drc)
     if (!drc->dev) {
         return RTAS_OUT_NO_SUCH_INDICATOR;
     }
-    if (drc->awaiting_release) {
+    if (drc->unplug_requested) {
         /* Don't allow the guest to move a device away from UNUSABLE
          * state when we want to unplug it */
         return RTAS_OUT_NO_SUCH_INDICATOR;
@@ -184,7 +184,7 @@ static uint32_t drc_set_usable(sPAPRDRConnector *drc)
 static uint32_t drc_set_unusable(sPAPRDRConnector *drc)
 {
     drc->allocation_state = SPAPR_DR_ALLOCATION_STATE_UNUSABLE;
-    if (drc->awaiting_release) {
+    if (drc->unplug_requested) {
         uint32_t drc_index = spapr_drc_index(drc);
         trace_spapr_drc_set_allocation_state_finalizing(drc_index);
         spapr_drc_detach(drc);
@@ -363,7 +363,7 @@ static void spapr_drc_release(sPAPRDRConnector *drc)
 
     drck->release(drc->dev);
 
-    drc->awaiting_release = false;
+    drc->unplug_requested = false;
     g_free(drc->fdt);
     drc->fdt = NULL;
     drc->fdt_start_offset = 0;
@@ -375,7 +375,7 @@ void spapr_drc_detach(sPAPRDRConnector *drc)
 {
     trace_spapr_drc_detach(spapr_drc_index(drc));
 
-    drc->awaiting_release = true;
+    drc->unplug_requested = true;
 
     if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_ISOLATED) {
         trace_spapr_drc_awaiting_isolated(spapr_drc_index(drc));
@@ -391,11 +391,6 @@ void spapr_drc_detach(sPAPRDRConnector *drc)
     spapr_drc_release(drc);
 }
 
-static bool release_pending(sPAPRDRConnector *drc)
-{
-    return drc->awaiting_release;
-}
-
 void spapr_drc_reset(sPAPRDRConnector *drc)
 {
     trace_spapr_drc_reset(spapr_drc_index(drc));
@@ -406,7 +401,7 @@ void spapr_drc_reset(sPAPRDRConnector *drc)
     /* immediately upon reset we can safely assume DRCs whose devices
      * are pending removal can be safely removed.
      */
-    if (drc->awaiting_release) {
+    if (drc->unplug_requested) {
         spapr_drc_release(drc);
     }
 
@@ -454,7 +449,7 @@ static bool spapr_drc_needed(void *opaque)
     case SPAPR_DR_CONNECTOR_TYPE_LMB:
         rc = !((drc->isolation_state == SPAPR_DR_ISOLATION_STATE_UNISOLATED) &&
                (drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_USABLE) &&
-               drc->configured && !drc->awaiting_release);
+               drc->configured);
         break;
     case SPAPR_DR_CONNECTOR_TYPE_PHB:
     case SPAPR_DR_CONNECTOR_TYPE_VIO:
@@ -474,7 +469,6 @@ static const VMStateDescription vmstate_spapr_drc = {
         VMSTATE_UINT32(allocation_state, sPAPRDRConnector),
         VMSTATE_UINT32(dr_indicator, sPAPRDRConnector),
         VMSTATE_BOOL(configured, sPAPRDRConnector),
-        VMSTATE_BOOL(awaiting_release, sPAPRDRConnector),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -565,11 +559,9 @@ static void spapr_dr_connector_instance_init(Object *obj)
 static void spapr_dr_connector_class_init(ObjectClass *k, void *data)
 {
     DeviceClass *dk = DEVICE_CLASS(k);
-    sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_CLASS(k);
 
     dk->realize = realize;
     dk->unrealize = unrealize;
-    drck->release_pending = release_pending;
     /*
      * Reason: it crashes FIXME find and document the real reason
      */
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 092a2f5f3d..6ecdf29d28 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1476,7 +1476,6 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
 {
     sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
     PCIDevice *pdev = PCI_DEVICE(plugged_dev);
-    sPAPRDRConnectorClass *drck;
     sPAPRDRConnector *drc = spapr_phb_get_pci_drc(phb, pdev);
 
     if (!phb->dr_enabled) {
@@ -1488,8 +1487,7 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
     g_assert(drc);
     g_assert(drc->dev == plugged_dev);
 
-    drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
-    if (!drck->release_pending(drc)) {
+    if (!spapr_drc_unplug_requested(drc)) {
         PCIBus *bus = PCI_BUS(qdev_get_parent_bus(DEVICE(pdev)));
         uint32_t slotnr = PCI_SLOT(pdev->devfn);
         sPAPRDRConnector *func_drc;
@@ -1505,7 +1503,7 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
                 func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
                 state = func_drck->dr_entity_sense(func_drc);
                 if (state == SPAPR_DR_ENTITY_SENSE_PRESENT
-                    && !func_drck->release_pending(func_drc)) {
+                    && !spapr_drc_unplug_requested(func_drc)) {
                     error_setg(errp,
                                "PCI: slot %d, function %d still present. "
                                "Must unplug all non-0 functions first.",