PCI shared IRQ fix (original patch by andrzej zaborowski).

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2165 c046a42c-6fe2-441c-8c8c-71466251a162

7 files changed, 88 insertions, 72 deletions

diff --git a/hw/apb_pci.c b/hw/apb_pci.c
index 02e9824b39..6fa885e9ea 100644
--- a/hw/apb_pci.c
+++ b/hw/apb_pci.c
@@ -179,10 +179,18 @@ static CPUReadMemoryFunc *pci_apb_ioread[] = {
     &pci_apb_ioreadl,
 };
 
-/* ??? This is probably wrong.  */
-static void pci_apb_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
 {
-    pic_set_irq_new(pic, d->config[PCI_INTERRUPT_LINE], level);
+    /* ??? As mentioned below this is probably wrong.  */
+    return irq_num;
+}
+
+static void pci_apb_set_irq(void *pic, int irq_num, int level)
+{
+    /* ??? This is almost certainly wrong.  However the rest of the sun4u
+       IRQ handling is missing, as is OpenBIOS support, so it wouldn't work
+       anyway.  */
+    pic_set_irq_new(pic, irq_num, level);
 }
 
 PCIBus *pci_apb_init(target_ulong special_base, target_ulong mem_base,
@@ -194,7 +202,7 @@ PCIBus *pci_apb_init(target_ulong special_base, target_ulong mem_base,
 
     s = qemu_mallocz(sizeof(APBState));
     /* Ultrasparc APB main bus */
-    s->bus = pci_register_bus(pci_apb_set_irq, pic, 0);
+    s->bus = pci_register_bus(pci_apb_set_irq, pci_apb_map_irq, pic, 0);
 
     pci_mem_config = cpu_register_io_memory(0, pci_apb_config_read,
                                             pci_apb_config_write, s);
diff --git a/hw/grackle_pci.c b/hw/grackle_pci.c
index e3cbceb49a..8f8e5c0638 100644
--- a/hw/grackle_pci.c
+++ b/hw/grackle_pci.c
@@ -74,11 +74,15 @@ static CPUReadMemoryFunc *pci_grackle_read[] = {
     &pci_host_data_readl,
 };
 
-/* XXX: we do not simulate the hardware - we rely on the BIOS to
-   set correctly for irq line field */
-static void pci_grackle_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+/* Don't know if this matches real hardware, but it agrees with OHW.  */
+static int pci_grackle_map_irq(PCIDevice *pci_dev, int irq_num)
 {
-    heathrow_pic_set_irq(pic, d->config[PCI_INTERRUPT_LINE], level);
+    return (irq_num + (pci_dev->devfn >> 3)) & 3;
+}
+
+static void pci_grackle_set_irq(void *pic, int irq_num, int level)
+{
+    heathrow_pic_set_irq(pic, irq_num + 8, level);
 }
 
 PCIBus *pci_grackle_init(uint32_t base, void *pic)
@@ -88,7 +92,7 @@ PCIBus *pci_grackle_init(uint32_t base, void *pic)
     int pci_mem_config, pci_mem_data;
 
     s = qemu_mallocz(sizeof(GrackleState));
-    s->bus = pci_register_bus(pci_grackle_set_irq, pic, 0);
+    s->bus = pci_register_bus(pci_grackle_set_irq, pci_grackle_map_irq, pic, 0);
 
     pci_mem_config = cpu_register_io_memory(0, pci_grackle_config_read, 
                                             pci_grackle_config_write, s);
diff --git a/hw/pci.c b/hw/pci.c
index 75bd981104..78f05cd90f 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -29,11 +29,15 @@ struct PCIBus {
     int bus_num;
     int devfn_min;
     pci_set_irq_fn set_irq;
+    pci_map_irq_fn map_irq;
     uint32_t config_reg; /* XXX: suppress */
     /* low level pic */
     SetIRQFunc *low_set_irq;
     void *irq_opaque;
     PCIDevice *devices[256];
+    /* The bus IRQ state is the logical OR of the connected devices.
+       Keep a count of the number of devices with raised IRQs.  */
+    int irq_count[4];
 };
 
 static void pci_update_mappings(PCIDevice *d);
@@ -42,13 +46,16 @@ target_phys_addr_t pci_mem_base;
 static int pci_irq_index;
 static PCIBus *first_bus;
 
-PCIBus *pci_register_bus(pci_set_irq_fn set_irq, void *pic, int devfn_min)
+PCIBus *pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
+                         void *pic, int devfn_min)
 {
     PCIBus *bus;
     bus = qemu_mallocz(sizeof(PCIBus));
     bus->set_irq = set_irq;
+    bus->map_irq = map_irq;
     bus->irq_opaque = pic;
     bus->devfn_min = devfn_min;
+    memset(bus->irq_count, 0, sizeof(bus->irq_count));
     first_bus = bus;
     return bus;
 }
@@ -100,6 +107,7 @@ PCIDevice *pci_register_device(PCIBus *bus, const char *name,
     pci_dev->bus = bus;
     pci_dev->devfn = devfn;
     pstrcpy(pci_dev->name, sizeof(pci_dev->name), name);
+    memset(pci_dev->irq_state, 0, sizeof(pci_dev->irq_state));
 
     if (!config_read)
         config_read = pci_default_read_config;
@@ -404,7 +412,11 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
 void pci_set_irq(PCIDevice *pci_dev, int irq_num, int level)
 {
     PCIBus *bus = pci_dev->bus;
-    bus->set_irq(pci_dev, bus->irq_opaque, irq_num, level);
+
+    irq_num = bus->map_irq(pci_dev, irq_num);
+    bus->irq_count[irq_num] += level - pci_dev->irq_state[irq_num];
+    pci_dev->irq_state[irq_num] = level;
+    bus->set_irq(bus->irq_opaque, irq_num, bus->irq_count[irq_num] != 0);
 }
 
 /***********************************************************/
diff --git a/hw/piix_pci.c b/hw/piix_pci.c
index 672b736ad0..939521c7bb 100644
--- a/hw/piix_pci.c
+++ b/hw/piix_pci.c
@@ -40,7 +40,17 @@ static uint32_t i440fx_addr_readl(void* opaque, uint32_t addr)
     return s->config_reg;
 }
 
-static void piix3_set_irq(PCIDevice *pci_dev, void *pic, int irq_num, int level);
+static void piix3_set_irq(void *pic, int irq_num, int level);
+
+/* return the global irq number corresponding to a given device irq
+   pin. We could also use the bus number to have a more precise
+   mapping. */
+static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
+{
+    int slot_addend;
+    slot_addend = (pci_dev->devfn >> 3) - 1;
+    return (irq_num + slot_addend) & 3;
+}
 
 PCIBus *i440fx_init(void)
 {
@@ -49,7 +59,7 @@ PCIBus *i440fx_init(void)
     I440FXState *s;
 
     s = qemu_mallocz(sizeof(I440FXState));
-    b = pci_register_bus(piix3_set_irq, NULL, 0);
+    b = pci_register_bus(piix3_set_irq, pci_slot_get_pirq, NULL, 0);
     s->bus = b;
 
     register_ioport_write(0xcf8, 4, 4, i440fx_addr_writel, s);
@@ -83,65 +93,25 @@ static PCIDevice *piix3_dev;
 /* just used for simpler irq handling. */
 #define PCI_IRQ_WORDS   ((PCI_DEVICES_MAX + 31) / 32)
 
-static uint32_t pci_irq_levels[4][PCI_IRQ_WORDS];
-
-/* return the global irq number corresponding to a given device irq
-   pin. We could also use the bus number to have a more precise
-   mapping. */
-static inline int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
-{
-    int slot_addend;
-    slot_addend = (pci_dev->devfn >> 3) - 1;
-    return (irq_num + slot_addend) & 3;
-}
-
-static inline int get_pci_irq_level(int irq_num)
-{
-    int pic_level;
-#if (PCI_IRQ_WORDS == 2)
-    pic_level = ((pci_irq_levels[irq_num][0] | 
-                  pci_irq_levels[irq_num][1]) != 0);
-#else
-    {
-        int i;
-        pic_level = 0;
-        for(i = 0; i < PCI_IRQ_WORDS; i++) {
-            if (pci_irq_levels[irq_num][i]) {
-                pic_level = 1;
-                break;
-            }
-        }
-    }
-#endif
-    return pic_level;
-}
+static int pci_irq_levels[4];
 
-static void piix3_set_irq(PCIDevice *pci_dev, void *pic, int irq_num, int level)
+static void piix3_set_irq(void *pic, int irq_num, int level)
 {
-    int irq_index, shift, pic_irq, pic_level;
-    uint32_t *p;
+    int i, pic_irq, pic_level;
 
-    irq_num = pci_slot_get_pirq(pci_dev, irq_num);
-    irq_index = pci_dev->irq_index;
-    p = &pci_irq_levels[irq_num][irq_index >> 5];
-    shift = (irq_index & 0x1f);
-    *p = (*p & ~(1 << shift)) | (level << shift);
+    pci_irq_levels[irq_num] = level;
 
     /* now we change the pic irq level according to the piix irq mappings */
     /* XXX: optimize */
     pic_irq = piix3_dev->config[0x60 + irq_num];
     if (pic_irq < 16) {
-        /* the pic level is the logical OR of all the PCI irqs mapped
+        /* The pic level is the logical OR of all the PCI irqs mapped
            to it */
         pic_level = 0;
-        if (pic_irq == piix3_dev->config[0x60])
-            pic_level |= get_pci_irq_level(0);
-        if (pic_irq == piix3_dev->config[0x61])
-            pic_level |= get_pci_irq_level(1);
-        if (pic_irq == piix3_dev->config[0x62])
-            pic_level |= get_pci_irq_level(2);
-        if (pic_irq == piix3_dev->config[0x63])
-            pic_level |= get_pci_irq_level(3);
+        for (i = 0; i < 4; i++) {
+            if (pic_irq == piix3_dev->config[0x60 + i])
+                pic_level |= pci_irq_levels[i];
+        }
         pic_set_irq(pic_irq, pic_level);
     }
 }
diff --git a/hw/prep_pci.c b/hw/prep_pci.c
index a31b74c80a..b5ff8eb0ff 100644
--- a/hw/prep_pci.c
+++ b/hw/prep_pci.c
@@ -117,11 +117,21 @@ static CPUReadMemoryFunc *PPC_PCIIO_read[] = {
     &PPC_PCIIO_readl,
 };
 
-static void prep_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+/* Don't know if this matches real hardware, but it agrees with OHW.  */
+static int prep_map_irq(PCIDevice *pci_dev, int irq_num)
 {
-    /* XXX: we do not simulate the hardware - we rely on the BIOS to
-       set correctly for irq line field */
-    pic_set_irq(d->config[PCI_INTERRUPT_LINE], level);
+    return (irq_num + (pci_dev->devfn >> 3)) & 3;
+}
+
+static int prep_irq_levels[4];
+
+static void prep_set_irq(void *pic, int irq_num, int level)
+{
+    int pic_irq_num;
+    prep_irq_levels[irq_num] = level;
+    level |= prep_irq_levels[irq_num ^ 2];
+    pic_irq_num = (irq_num == 0 || irq_num == 2) ? 9 : 11;
+    pic_set_irq(pic_irq_num, level);
 }
 
 PCIBus *pci_prep_init(void)
@@ -131,7 +141,7 @@ PCIBus *pci_prep_init(void)
     int PPC_io_memory;
 
     s = qemu_mallocz(sizeof(PREPPCIState));
-    s->bus = pci_register_bus(prep_set_irq, NULL, 0);
+    s->bus = pci_register_bus(prep_set_irq, prep_map_irq, NULL, 0);
 
     register_ioport_write(0xcf8, 4, 4, pci_prep_addr_writel, s);
     register_ioport_read(0xcf8, 4, 4, pci_prep_addr_readl, s);
diff --git a/hw/unin_pci.c b/hw/unin_pci.c
index a7e3600047..d132d6ec2e 100644
--- a/hw/unin_pci.c
+++ b/hw/unin_pci.c
@@ -140,9 +140,15 @@ static CPUReadMemoryFunc *pci_unin_read[] = {
 };
 #endif
 
-static void pci_unin_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+/* Don't know if this matches real hardware, but it agrees with OHW.  */
+static int pci_unin_map_irq(PCIDevice *pci_dev, int irq_num)
 {
-    openpic_set_irq(pic, d->config[PCI_INTERRUPT_LINE], level);
+    return (irq_num + (pci_dev->devfn >> 3)) & 3;
+}
+
+static void pci_unin_set_irq(void *pic, int irq_num, int level)
+{
+    openpic_set_irq(pic, irq_num + 8, level);
 }
 
 PCIBus *pci_pmac_init(void *pic)
@@ -154,7 +160,8 @@ PCIBus *pci_pmac_init(void *pic)
     /* Use values found on a real PowerMac */
     /* Uninorth main bus */
     s = qemu_mallocz(sizeof(UNINState));
-    s->bus = pci_register_bus(pci_unin_set_irq, NULL, 11 << 3);
+    s->bus = pci_register_bus(pci_unin_set_irq, pci_unin_map_irq,
+                              pic, 11 << 3);
 
     pci_mem_config = cpu_register_io_memory(0, pci_unin_main_config_read, 
                                             pci_unin_main_config_write, s);
diff --git a/hw/versatile_pci.c b/hw/versatile_pci.c
index aac61c7b55..9addda8f01 100644
--- a/hw/versatile_pci.c
+++ b/hw/versatile_pci.c
@@ -79,7 +79,12 @@ static CPUReadMemoryFunc *pci_vpb_config_read[] = {
 
 static int pci_vpb_irq;
 
-static void pci_vpb_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+static int pci_vpb_map_irq(PCIDevice *d, int irq_num)
+{
+    return irq_num;
+}
+
+static void pci_vpb_set_irq(void *pic, int irq_num, int level)
 {
     pic_set_irq_new(pic, pci_vpb_irq + irq_num, level);
 }
@@ -100,7 +105,7 @@ PCIBus *pci_vpb_init(void *pic, int irq, int realview)
         base = 0x40000000;
         name = "Versatile/PB PCI Controller";
     }
-    s = pci_register_bus(pci_vpb_set_irq, pic, 11 << 3);
+    s = pci_register_bus(pci_vpb_set_irq, pci_vpb_map_irq, pic, 11 << 3);
     /* ??? Register memory space.  */
 
     mem_config = cpu_register_io_memory(0, pci_vpb_config_read,