PC parallel port support (Mark Jonckheere)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1221 c046a42c-6fe2-441c-8c8c-71466251a162

2 files changed, 197 insertions, 0 deletions

diff --git a/hw/parallel.c b/hw/parallel.c
new file mode 100644
index 0000000000..1b9fe7cef5
--- /dev/null
+++ b/hw/parallel.c
@@ -0,0 +1,188 @@
+/*
+ * QEMU Parallel PORT emulation
+ * 
+ * Copyright (c) 2003-2004 Fabrice Bellard
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "vl.h"
+
+//#define DEBUG_PARALLEL
+
+/*
+ * These are the definitions for the Printer Status Register
+ */
+#define PARA_STS_BUSY	0x80	/* Busy complement */
+#define PARA_STS_ACK	0x40	/* Acknowledge */
+#define PARA_STS_PAPER	0x20	/* Out of paper */
+#define PARA_STS_ONLINE	0x10	/* Online */
+#define PARA_STS_ERROR	0x08	/* Error complement */
+
+/*
+ * These are the definitions for the Printer Control Register
+ */
+#define PARA_CTR_INTEN	0x10	/* IRQ Enable */
+#define PARA_CTR_SELECT	0x08	/* Select In complement */
+#define PARA_CTR_INIT	0x04	/* Initialize Printer complement */
+#define PARA_CTR_AUTOLF	0x02	/* Auto linefeed complement */
+#define PARA_CTR_STROBE	0x01	/* Strobe complement */
+
+struct ParallelState {
+    uint8_t data;
+    uint8_t status; /* read only register */
+    uint8_t control;
+    int irq;
+    int irq_pending;
+    CharDriverState *chr;
+};
+
+static void parallel_update_irq(ParallelState *s)
+{
+    if (s->irq_pending)
+        pic_set_irq(s->irq, 1);
+    else
+        pic_set_irq(s->irq, 0);
+}
+
+static void parallel_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    ParallelState *s = opaque;
+    
+    addr &= 7;
+#ifdef DEBUG_PARALLEL
+    printf("parallel: write addr=0x%02x val=0x%02x\n", addr, val);
+#endif
+    switch(addr) {
+    case 0:
+        s->data = val;
+        parallel_update_irq(s);
+        break;
+    case 2:
+        if ((val & PARA_CTR_INIT) == 0 ) {
+            s->status = PARA_STS_BUSY;
+            s->status |= PARA_STS_ACK;
+            s->status |= PARA_STS_ONLINE;
+            s->status |= PARA_STS_ERROR;
+        }
+        else if (val & PARA_CTR_SELECT) {
+            if (val & PARA_CTR_STROBE) {
+                s->status &= ~PARA_STS_BUSY;
+                if ((s->control & PARA_CTR_STROBE) == 0)
+                    qemu_chr_write(s->chr, &s->data, 1);
+            } else {
+                if (s->control & PARA_CTR_INTEN) {
+                    s->irq_pending = 1;
+                }
+            }
+        }
+        parallel_update_irq(s);
+        s->control = val;
+        break;
+    }
+}
+
+static uint32_t parallel_ioport_read(void *opaque, uint32_t addr)
+{
+    ParallelState *s = opaque;
+    uint32_t ret = 0xff;
+
+    addr &= 7;
+    switch(addr) {
+    case 0:
+        ret = s->data; 
+        break;
+    case 1:
+        ret = s->status;
+        s->irq_pending = 0;
+        if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
+            /* XXX Fixme: wait 5 microseconds */
+            if (s->status & PARA_STS_ACK)
+                s->status &= ~PARA_STS_ACK;
+            else {
+            /* XXX Fixme: wait 5 microseconds */
+                s->status |= PARA_STS_ACK;
+                s->status |= PARA_STS_BUSY;
+            }
+        }
+        parallel_update_irq(s);
+        break;
+    case 2:
+        ret = s->control;
+        break;
+    }
+#ifdef DEBUG_PARALLEL
+    printf("parallel: read addr=0x%02x val=0x%02x\n", addr, ret);
+#endif
+    return ret;
+}
+
+static int parallel_can_receive(ParallelState *s)
+{
+    return 0;
+}
+
+static void parallel_receive_byte(ParallelState *s, int ch)
+{
+}
+
+static void parallel_receive_break(ParallelState *s)
+{
+}
+
+static int parallel_can_receive1(void *opaque)
+{
+    ParallelState *s = opaque;
+    return parallel_can_receive(s);
+}
+
+static void parallel_receive1(void *opaque, const uint8_t *buf, int size)
+{
+    ParallelState *s = opaque;
+    parallel_receive_byte(s, buf[0]);
+}
+
+static void parallel_event(void *opaque, int event)
+{
+    ParallelState *s = opaque;
+}
+
+/* If fd is zero, it means that the parallel device uses the console */
+ParallelState *parallel_init(int base, int irq, CharDriverState *chr)
+{
+    ParallelState *s;
+
+    s = qemu_mallocz(sizeof(ParallelState));
+    if (!s)
+        return NULL;
+    s->irq = irq;
+    s->data = 0;
+    s->status = PARA_STS_BUSY;
+    s->status |= PARA_STS_ACK;
+    s->status |= PARA_STS_ONLINE;
+    s->status |= PARA_STS_ERROR;
+    s->control = PARA_CTR_SELECT;
+    s->control |= PARA_CTR_INIT;
+
+    register_ioport_write(base, 8, 1, parallel_ioport_write, s);
+    register_ioport_read(base, 8, 1, parallel_ioport_read, s);
+    s->chr = chr;
+    qemu_chr_add_read_handler(chr, parallel_can_receive1, parallel_receive1, s);
+    qemu_chr_add_event_handler(chr, parallel_event);
+    return s;
+}
diff --git a/hw/pc.c b/hw/pc.c
index 7b6c8946fa..5deb445a3c 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -376,6 +376,9 @@ static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
 
+static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
+static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
+
 /* PC hardware initialisation */
 void pc_init(int ram_size, int vga_ram_size, int boot_device,
              DisplayState *ds, const char **fd_filename, int snapshot,
@@ -538,6 +541,12 @@ void pc_init(int ram_size, int vga_ram_size, int boot_device,
         }
     }
 
+    for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
+        if (parallel_hds[i]) {
+            parallel_init(parallel_io[i], parallel_irq[i], parallel_hds[i]);
+        }
+    }
+
     if (pci_enabled) {
         for(i = 0; i < nb_nics; i++) {
             pci_ne2000_init(pci_bus, &nd_table[i]);