ETRAX serial port:

* Simulate basic interrupt driven serial io.
* Connect to qemu char dev.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4300 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 164 insertions, 29 deletions

diff --git a/hw/etraxfs_ser.c b/hw/etraxfs_ser.c
index 778b429c0a..bb971f8d26 100644
--- a/hw/etraxfs_ser.c
+++ b/hw/etraxfs_ser.c
@@ -25,21 +25,68 @@
 #include <stdio.h>
 #include <ctype.h>
 #include "hw.h"
+#include "qemu-char.h"
 
 #define D(x)
 
-#define RW_TR_DMA_EN 0x04
-#define RW_DOUT 0x1c
-#define RW_STAT_DIN 0x20
-#define R_STAT_DIN 0x24
+#define RW_TR_CTRL     0x00
+#define RW_TR_DMA_EN   0x04
+#define RW_REC_CTRL    0x08
+#define RW_DOUT        0x1c
+#define RS_STAT_DIN    0x20
+#define R_STAT_DIN     0x24
+#define RW_INTR_MASK   0x2c
+#define RW_ACK_INTR    0x30
+#define R_INTR         0x34
+#define R_MASKED_INTR  0x38
 
-static uint32_t ser_readb (void *opaque, target_phys_addr_t addr)
+#define STAT_DAV     16
+#define STAT_TR_IDLE 22
+#define STAT_TR_RDY  24
+
+struct etrax_serial_t
 {
-	D(CPUState *env = opaque);
-	D(printf ("%s %x pc=%x\n", __func__, addr, env->pc));
-	return 0;
+	CPUState *env;
+	CharDriverState *chr;
+	qemu_irq *irq;
+
+	target_phys_addr_t base;
+
+	int pending_tx;
+
+	/* Control registers.  */
+	uint32_t rw_tr_ctrl;
+	uint32_t rw_tr_dma_en;
+	uint32_t rw_rec_ctrl;
+	uint32_t rs_stat_din;
+	uint32_t r_stat_din;
+	uint32_t rw_intr_mask;
+	uint32_t rw_ack_intr;
+	uint32_t r_intr;
+	uint32_t r_masked_intr;
+};
+
+static void ser_update_irq(struct etrax_serial_t *s)
+{
+	uint32_t o_irq = s->r_masked_intr;
+
+	s->r_intr &= ~(s->rw_ack_intr);
+	s->r_masked_intr = s->r_intr & s->rw_intr_mask;
+
+	if (o_irq != s->r_masked_intr) {
+		D(printf("irq_mask=%x r_intr=%x rmi=%x airq=%x \n", 
+			 s->rw_intr_mask, s->r_intr, 
+			 s->r_masked_intr, s->rw_ack_intr));
+		if (s->r_masked_intr)
+			qemu_irq_raise(s->irq[0]);
+		else
+			qemu_irq_lower(s->irq[0]);
+	}
+	s->rw_ack_intr = 0;
 }
-static uint32_t ser_readw (void *opaque, target_phys_addr_t addr)
+
+
+static uint32_t ser_readb (void *opaque, target_phys_addr_t addr)
 {
 	D(CPUState *env = opaque);
 	D(printf ("%s %x pc=%x\n", __func__, addr, env->pc));
@@ -48,16 +95,40 @@ static uint32_t ser_readw (void *opaque, target_phys_addr_t addr)
 
 static uint32_t ser_readl (void *opaque, target_phys_addr_t addr)
 {
-	D(CPUState *env = opaque);
+	struct etrax_serial_t *s = opaque;
+	D(CPUState *env = s->env);
 	uint32_t r = 0;
 
 	switch (addr & 0xfff)
 	{
+		case RW_TR_CTRL:
+			r = s->rw_tr_ctrl;
+			break;
 		case RW_TR_DMA_EN:
+			r = s->rw_tr_dma_en;
+			break;
+		case RS_STAT_DIN:
+			r = s->rs_stat_din;
+			/* clear dav.  */
+			s->rs_stat_din &= ~(1 << STAT_DAV);
 			break;
 		case R_STAT_DIN:
-			r |= 1 << 24; /* set tr_rdy.  */
-			r |= 1 << 22; /* set tr_idle.  */
+			r = s->rs_stat_din;
+			break;
+		case RW_ACK_INTR:
+			D(printf("load rw_ack_intr=%x\n", s->rw_ack_intr));
+			r = s->rw_ack_intr;
+			break;
+		case RW_INTR_MASK:
+			r = s->rw_intr_mask;
+			break;
+		case R_INTR:
+			D(printf("load r_intr=%x\n", s->r_intr));
+			r = s->r_intr;
+			break;
+		case R_MASKED_INTR:
+			D(printf("load r_maked_intr=%x\n", s->r_masked_intr));
+			r = s->r_masked_intr;
 			break;
 
 		default:
@@ -70,53 +141,117 @@ static uint32_t ser_readl (void *opaque, target_phys_addr_t addr)
 static void
 ser_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)
 {
-	D(CPUState *env = opaque);
+	D(struct etrax_serial_t *s = opaque);
+	D(CPUState *env = s->env);
  	D(printf ("%s %x %x pc=%x\n", __func__, addr, value, env->pc));
 }
 static void
-ser_writew (void *opaque, target_phys_addr_t addr, uint32_t value)
-{
-	D(CPUState *env = opaque);
-	D(printf ("%s %x %x pc=%x\n", __func__, addr, value, env->pc));
-}
-static void
 ser_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
 {
-	D(CPUState *env = opaque);
+	struct etrax_serial_t *s = opaque;
+	unsigned char ch = value;
+	D(CPUState *env = s->env);
 
 	switch (addr & 0xfff)
 	{
+		case RW_TR_CTRL:
+			D(printf("rw_tr_ctrl=%x\n", value));
+			s->rw_tr_ctrl = value;
+			break;
 		case RW_TR_DMA_EN:
+			D(printf("rw_tr_dma_en=%x\n", value));
+			s->rw_tr_dma_en = value;
 			break;
 		case RW_DOUT:
-			if (isprint(value) || isspace(value))
-				putchar(value);
-			else
-				putchar('.');
-			fflush(stdout);
+			qemu_chr_write(s->chr, &ch, 1);
+			s->r_intr |= 1;
+			s->pending_tx = 1;
+			break;
+		case RW_ACK_INTR:
+			D(printf("rw_ack_intr=%x\n", value));
+			s->rw_ack_intr = value;
+			if (s->pending_tx && (s->rw_ack_intr & 1)) {
+				s->r_intr |= 1;
+				s->pending_tx = 0;
+				s->rw_ack_intr &= ~1;
+			}
+			break;
+		case RW_INTR_MASK:
+			D(printf("r_intr_mask=%x\n", value));
+			s->rw_intr_mask = value;
 			break;
 		default:
 			D(printf ("%s %x %x pc=%x\n",
 				  __func__, addr, value, env->pc));
 			break;
 	}
+	ser_update_irq(s);
 }
 
 static CPUReadMemoryFunc *ser_read[] = {
 	&ser_readb,
-	&ser_readw,
+	&ser_readb,
 	&ser_readl,
 };
 
 static CPUWriteMemoryFunc *ser_write[] = {
 	&ser_writeb,
-	&ser_writew,
+	&ser_writeb,
 	&ser_writel,
 };
 
-void etraxfs_ser_init(CPUState *env, qemu_irq *irqs, target_phys_addr_t base)
+static void serial_receive(void *opaque, const uint8_t *buf, int size)
 {
+	struct etrax_serial_t *s = opaque;
+
+	s->r_intr |= 8;
+	s->rs_stat_din &= ~0xff;
+	s->rs_stat_din |= (buf[0] & 0xff);
+	s->rs_stat_din |= (1 << STAT_DAV); /* dav.  */
+	ser_update_irq(s);
+}
+
+static int serial_can_receive(void *opaque)
+{
+	struct etrax_serial_t *s = opaque;
+	int r;
+
+	/* Is the receiver enabled?  */
+	r = s->rw_rec_ctrl & 1;
+
+	/* Pending rx data?  */
+	r |= !(s->r_intr & 8);
+	return r;
+}
+
+static void serial_event(void *opaque, int event)
+{
+
+}
+
+void etraxfs_ser_init(CPUState *env, qemu_irq *irq, CharDriverState *chr,
+		      target_phys_addr_t base)
+{
+	struct etrax_serial_t *s;
 	int ser_regs;
-	ser_regs = cpu_register_io_memory(0, ser_read, ser_write, env);
+
+	s = qemu_mallocz(sizeof *s);
+	if (!s)
+		return;
+
+	s->env = env;
+	s->irq = irq;
+	s->base = base;
+
+	s->chr = chr;
+
+	/* transmitter begins ready and idle.  */
+	s->rs_stat_din |= (1 << STAT_TR_RDY);
+	s->rs_stat_din |= (1 << STAT_TR_IDLE);
+
+	qemu_chr_add_handlers(chr, serial_can_receive, serial_receive,
+			      serial_event, s);
+
+	ser_regs = cpu_register_io_memory(0, ser_read, ser_write, s);
 	cpu_register_physical_memory (base, 0x3c, ser_regs);
 }