usb: the big rename

Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 1898 insertions, 0 deletions

diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
new file mode 100644
index 0000000000..dd79cef81f
--- /dev/null
+++ b/hw/usb/hcd-ohci.c
@@ -0,0 +1,1898 @@
+/*
+ * QEMU USB OHCI Emulation
+ * Copyright (c) 2004 Gianni Tedesco
+ * Copyright (c) 2006 CodeSourcery
+ * Copyright (c) 2006 Openedhand Ltd.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * TODO:
+ *  o Isochronous transfers
+ *  o Allocate bandwidth in frames properly
+ *  o Disable timers when nothing needs to be done, or remove timer usage
+ *    all together.
+ *  o Handle unrecoverable errors properly
+ *  o BIOS work to boot from USB storage
+*/
+
+#include "hw/hw.h"
+#include "qemu-timer.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
+#include "hw/usb-ohci.h"
+#include "hw/sysbus.h"
+#include "hw/qdev-addr.h"
+
+//#define DEBUG_OHCI
+/* Dump packet contents.  */
+//#define DEBUG_PACKET
+//#define DEBUG_ISOCH
+/* This causes frames to occur 1000x slower */
+//#define OHCI_TIME_WARP 1
+
+#ifdef DEBUG_OHCI
+#define DPRINTF printf
+#else
+#define DPRINTF(...)
+#endif
+
+/* Number of Downstream Ports on the root hub.  */
+
+#define OHCI_MAX_PORTS 15
+
+static int64_t usb_frame_time;
+static int64_t usb_bit_time;
+
+typedef struct OHCIPort {
+    USBPort port;
+    uint32_t ctrl;
+} OHCIPort;
+
+typedef struct {
+    USBBus bus;
+    qemu_irq irq;
+    MemoryRegion mem;
+    int num_ports;
+    const char *name;
+
+    QEMUTimer *eof_timer;
+    int64_t sof_time;
+
+    /* OHCI state */
+    /* Control partition */
+    uint32_t ctl, status;
+    uint32_t intr_status;
+    uint32_t intr;
+
+    /* memory pointer partition */
+    uint32_t hcca;
+    uint32_t ctrl_head, ctrl_cur;
+    uint32_t bulk_head, bulk_cur;
+    uint32_t per_cur;
+    uint32_t done;
+    int done_count;
+
+    /* Frame counter partition */
+    uint32_t fsmps:15;
+    uint32_t fit:1;
+    uint32_t fi:14;
+    uint32_t frt:1;
+    uint16_t frame_number;
+    uint16_t padding;
+    uint32_t pstart;
+    uint32_t lst;
+
+    /* Root Hub partition */
+    uint32_t rhdesc_a, rhdesc_b;
+    uint32_t rhstatus;
+    OHCIPort rhport[OHCI_MAX_PORTS];
+
+    /* PXA27x Non-OHCI events */
+    uint32_t hstatus;
+    uint32_t hmask;
+    uint32_t hreset;
+    uint32_t htest;
+
+    /* SM501 local memory offset */
+    target_phys_addr_t localmem_base;
+
+    /* Active packets.  */
+    uint32_t old_ctl;
+    USBPacket usb_packet;
+    uint8_t usb_buf[8192];
+    uint32_t async_td;
+    int async_complete;
+
+} OHCIState;
+
+/* Host Controller Communications Area */
+struct ohci_hcca {
+    uint32_t intr[32];
+    uint16_t frame, pad;
+    uint32_t done;
+};
+
+static void ohci_bus_stop(OHCIState *ohci);
+static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev);
+
+/* Bitfields for the first word of an Endpoint Desciptor.  */
+#define OHCI_ED_FA_SHIFT  0
+#define OHCI_ED_FA_MASK   (0x7f<<OHCI_ED_FA_SHIFT)
+#define OHCI_ED_EN_SHIFT  7
+#define OHCI_ED_EN_MASK   (0xf<<OHCI_ED_EN_SHIFT)
+#define OHCI_ED_D_SHIFT   11
+#define OHCI_ED_D_MASK    (3<<OHCI_ED_D_SHIFT)
+#define OHCI_ED_S         (1<<13)
+#define OHCI_ED_K         (1<<14)
+#define OHCI_ED_F         (1<<15)
+#define OHCI_ED_MPS_SHIFT 16
+#define OHCI_ED_MPS_MASK  (0x7ff<<OHCI_ED_MPS_SHIFT)
+
+/* Flags in the head field of an Endpoint Desciptor.  */
+#define OHCI_ED_H         1
+#define OHCI_ED_C         2
+
+/* Bitfields for the first word of a Transfer Desciptor.  */
+#define OHCI_TD_R         (1<<18)
+#define OHCI_TD_DP_SHIFT  19
+#define OHCI_TD_DP_MASK   (3<<OHCI_TD_DP_SHIFT)
+#define OHCI_TD_DI_SHIFT  21
+#define OHCI_TD_DI_MASK   (7<<OHCI_TD_DI_SHIFT)
+#define OHCI_TD_T0        (1<<24)
+#define OHCI_TD_T1        (1<<25)
+#define OHCI_TD_EC_SHIFT  26
+#define OHCI_TD_EC_MASK   (3<<OHCI_TD_EC_SHIFT)
+#define OHCI_TD_CC_SHIFT  28
+#define OHCI_TD_CC_MASK   (0xf<<OHCI_TD_CC_SHIFT)
+
+/* Bitfields for the first word of an Isochronous Transfer Desciptor.  */
+/* CC & DI - same as in the General Transfer Desciptor */
+#define OHCI_TD_SF_SHIFT  0
+#define OHCI_TD_SF_MASK   (0xffff<<OHCI_TD_SF_SHIFT)
+#define OHCI_TD_FC_SHIFT  24
+#define OHCI_TD_FC_MASK   (7<<OHCI_TD_FC_SHIFT)
+
+/* Isochronous Transfer Desciptor - Offset / PacketStatusWord */
+#define OHCI_TD_PSW_CC_SHIFT 12
+#define OHCI_TD_PSW_CC_MASK  (0xf<<OHCI_TD_PSW_CC_SHIFT)
+#define OHCI_TD_PSW_SIZE_SHIFT 0
+#define OHCI_TD_PSW_SIZE_MASK  (0xfff<<OHCI_TD_PSW_SIZE_SHIFT)
+
+#define OHCI_PAGE_MASK    0xfffff000
+#define OHCI_OFFSET_MASK  0xfff
+
+#define OHCI_DPTR_MASK    0xfffffff0
+
+#define OHCI_BM(val, field) \
+  (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT)
+
+#define OHCI_SET_BM(val, field, newval) do { \
+    val &= ~OHCI_##field##_MASK; \
+    val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \
+    } while(0)
+
+/* endpoint descriptor */
+struct ohci_ed {
+    uint32_t flags;
+    uint32_t tail;
+    uint32_t head;
+    uint32_t next;
+};
+
+/* General transfer descriptor */
+struct ohci_td {
+    uint32_t flags;
+    uint32_t cbp;
+    uint32_t next;
+    uint32_t be;
+};
+
+/* Isochronous transfer descriptor */
+struct ohci_iso_td {
+    uint32_t flags;
+    uint32_t bp;
+    uint32_t next;
+    uint32_t be;
+    uint16_t offset[8];
+};
+
+#define USB_HZ                      12000000
+
+/* OHCI Local stuff */
+#define OHCI_CTL_CBSR         ((1<<0)|(1<<1))
+#define OHCI_CTL_PLE          (1<<2)
+#define OHCI_CTL_IE           (1<<3)
+#define OHCI_CTL_CLE          (1<<4)
+#define OHCI_CTL_BLE          (1<<5)
+#define OHCI_CTL_HCFS         ((1<<6)|(1<<7))
+#define  OHCI_USB_RESET       0x00
+#define  OHCI_USB_RESUME      0x40
+#define  OHCI_USB_OPERATIONAL 0x80
+#define  OHCI_USB_SUSPEND     0xc0
+#define OHCI_CTL_IR           (1<<8)
+#define OHCI_CTL_RWC          (1<<9)
+#define OHCI_CTL_RWE          (1<<10)
+
+#define OHCI_STATUS_HCR       (1<<0)
+#define OHCI_STATUS_CLF       (1<<1)
+#define OHCI_STATUS_BLF       (1<<2)
+#define OHCI_STATUS_OCR       (1<<3)
+#define OHCI_STATUS_SOC       ((1<<6)|(1<<7))
+
+#define OHCI_INTR_SO          (1<<0) /* Scheduling overrun */
+#define OHCI_INTR_WD          (1<<1) /* HcDoneHead writeback */
+#define OHCI_INTR_SF          (1<<2) /* Start of frame */
+#define OHCI_INTR_RD          (1<<3) /* Resume detect */
+#define OHCI_INTR_UE          (1<<4) /* Unrecoverable error */
+#define OHCI_INTR_FNO         (1<<5) /* Frame number overflow */
+#define OHCI_INTR_RHSC        (1<<6) /* Root hub status change */
+#define OHCI_INTR_OC          (1<<30) /* Ownership change */
+#define OHCI_INTR_MIE         (1<<31) /* Master Interrupt Enable */
+
+#define OHCI_HCCA_SIZE        0x100
+#define OHCI_HCCA_MASK        0xffffff00
+
+#define OHCI_EDPTR_MASK       0xfffffff0
+
+#define OHCI_FMI_FI           0x00003fff
+#define OHCI_FMI_FSMPS        0xffff0000
+#define OHCI_FMI_FIT          0x80000000
+
+#define OHCI_FR_RT            (1<<31)
+
+#define OHCI_LS_THRESH        0x628
+
+#define OHCI_RHA_RW_MASK      0x00000000 /* Mask of supported features.  */
+#define OHCI_RHA_PSM          (1<<8)
+#define OHCI_RHA_NPS          (1<<9)
+#define OHCI_RHA_DT           (1<<10)
+#define OHCI_RHA_OCPM         (1<<11)
+#define OHCI_RHA_NOCP         (1<<12)
+#define OHCI_RHA_POTPGT_MASK  0xff000000
+
+#define OHCI_RHS_LPS          (1<<0)
+#define OHCI_RHS_OCI          (1<<1)
+#define OHCI_RHS_DRWE         (1<<15)
+#define OHCI_RHS_LPSC         (1<<16)
+#define OHCI_RHS_OCIC         (1<<17)
+#define OHCI_RHS_CRWE         (1<<31)
+
+#define OHCI_PORT_CCS         (1<<0)
+#define OHCI_PORT_PES         (1<<1)
+#define OHCI_PORT_PSS         (1<<2)
+#define OHCI_PORT_POCI        (1<<3)
+#define OHCI_PORT_PRS         (1<<4)
+#define OHCI_PORT_PPS         (1<<8)
+#define OHCI_PORT_LSDA        (1<<9)
+#define OHCI_PORT_CSC         (1<<16)
+#define OHCI_PORT_PESC        (1<<17)
+#define OHCI_PORT_PSSC        (1<<18)
+#define OHCI_PORT_OCIC        (1<<19)
+#define OHCI_PORT_PRSC        (1<<20)
+#define OHCI_PORT_WTC         (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \
+                               |OHCI_PORT_OCIC|OHCI_PORT_PRSC)
+
+#define OHCI_TD_DIR_SETUP     0x0
+#define OHCI_TD_DIR_OUT       0x1
+#define OHCI_TD_DIR_IN        0x2
+#define OHCI_TD_DIR_RESERVED  0x3
+
+#define OHCI_CC_NOERROR             0x0
+#define OHCI_CC_CRC                 0x1
+#define OHCI_CC_BITSTUFFING         0x2
+#define OHCI_CC_DATATOGGLEMISMATCH  0x3
+#define OHCI_CC_STALL               0x4
+#define OHCI_CC_DEVICENOTRESPONDING 0x5
+#define OHCI_CC_PIDCHECKFAILURE     0x6
+#define OHCI_CC_UNDEXPETEDPID       0x7
+#define OHCI_CC_DATAOVERRUN         0x8
+#define OHCI_CC_DATAUNDERRUN        0x9
+#define OHCI_CC_BUFFEROVERRUN       0xc
+#define OHCI_CC_BUFFERUNDERRUN      0xd
+
+#define OHCI_HRESET_FSBIR       (1 << 0)
+
+/* Update IRQ levels */
+static inline void ohci_intr_update(OHCIState *ohci)
+{
+    int level = 0;
+
+    if ((ohci->intr & OHCI_INTR_MIE) &&
+        (ohci->intr_status & ohci->intr))
+        level = 1;
+
+    qemu_set_irq(ohci->irq, level);
+}
+
+/* Set an interrupt */
+static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr)
+{
+    ohci->intr_status |= intr;
+    ohci_intr_update(ohci);
+}
+
+/* Attach or detach a device on a root hub port.  */
+static void ohci_attach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    /* set connect status */
+    port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
+
+    /* update speed */
+    if (port->port.dev->speed == USB_SPEED_LOW) {
+        port->ctrl |= OHCI_PORT_LSDA;
+    } else {
+        port->ctrl &= ~OHCI_PORT_LSDA;
+    }
+
+    /* notify of remote-wakeup */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        ohci_set_interrupt(s, OHCI_INTR_RD);
+    }
+
+    DPRINTF("usb-ohci: Attached port %d\n", port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
+static void ohci_detach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    ohci_async_cancel_device(s, port1->dev);
+
+    /* set connect status */
+    if (port->ctrl & OHCI_PORT_CCS) {
+        port->ctrl &= ~OHCI_PORT_CCS;
+        port->ctrl |= OHCI_PORT_CSC;
+    }
+    /* disable port */
+    if (port->ctrl & OHCI_PORT_PES) {
+        port->ctrl &= ~OHCI_PORT_PES;
+        port->ctrl |= OHCI_PORT_PESC;
+    }
+    DPRINTF("usb-ohci: Detached port %d\n", port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
+static void ohci_wakeup(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t intr = 0;
+    if (port->ctrl & OHCI_PORT_PSS) {
+        DPRINTF("usb-ohci: port %d: wakeup\n", port1->index);
+        port->ctrl |= OHCI_PORT_PSSC;
+        port->ctrl &= ~OHCI_PORT_PSS;
+        intr = OHCI_INTR_RHSC;
+    }
+    /* Note that the controller can be suspended even if this port is not */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n");
+        /* This is the one state transition the controller can do by itself */
+        s->ctl &= ~OHCI_CTL_HCFS;
+        s->ctl |= OHCI_USB_RESUME;
+        /* In suspend mode only ResumeDetected is possible, not RHSC:
+         * see the OHCI spec 5.1.2.3.
+         */
+        intr = OHCI_INTR_RD;
+    }
+    ohci_set_interrupt(s, intr);
+}
+
+static void ohci_child_detach(USBPort *port1, USBDevice *child)
+{
+    OHCIState *s = port1->opaque;
+
+    ohci_async_cancel_device(s, child);
+}
+
+static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr)
+{
+    USBDevice *dev;
+    int i;
+
+    for (i = 0; i < ohci->num_ports; i++) {
+        if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) {
+            continue;
+        }
+        dev = usb_find_device(&ohci->rhport[i].port, addr);
+        if (dev != NULL) {
+            return dev;
+        }
+    }
+    return NULL;
+}
+
+/* Reset the controller */
+static void ohci_reset(void *opaque)
+{
+    OHCIState *ohci = opaque;
+    OHCIPort *port;
+    int i;
+
+    ohci_bus_stop(ohci);
+    ohci->ctl = 0;
+    ohci->old_ctl = 0;
+    ohci->status = 0;
+    ohci->intr_status = 0;
+    ohci->intr = OHCI_INTR_MIE;
+
+    ohci->hcca = 0;
+    ohci->ctrl_head = ohci->ctrl_cur = 0;
+    ohci->bulk_head = ohci->bulk_cur = 0;
+    ohci->per_cur = 0;
+    ohci->done = 0;
+    ohci->done_count = 7;
+
+    /* FSMPS is marked TBD in OCHI 1.0, what gives ffs?
+     * I took the value linux sets ...
+     */
+    ohci->fsmps = 0x2778;
+    ohci->fi = 0x2edf;
+    ohci->fit = 0;
+    ohci->frt = 0;
+    ohci->frame_number = 0;
+    ohci->pstart = 0;
+    ohci->lst = OHCI_LS_THRESH;
+
+    ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports;
+    ohci->rhdesc_b = 0x0; /* Impl. specific */
+    ohci->rhstatus = 0;
+
+    for (i = 0; i < ohci->num_ports; i++)
+      {
+        port = &ohci->rhport[i];
+        port->ctrl = 0;
+        if (port->port.dev && port->port.dev->attached) {
+            usb_port_reset(&port->port);
+        }
+      }
+    if (ohci->async_td) {
+        usb_cancel_packet(&ohci->usb_packet);
+        ohci->async_td = 0;
+    }
+    DPRINTF("usb-ohci: Reset %s\n", ohci->name);
+}
+
+/* Get an array of dwords from main memory */
+static inline int get_dwords(OHCIState *ohci,
+                             uint32_t addr, uint32_t *buf, int num)
+{
+    int i;
+
+    addr += ohci->localmem_base;
+
+    for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
+        cpu_physical_memory_read(addr, buf, sizeof(*buf));
+        *buf = le32_to_cpu(*buf);
+    }
+
+    return 1;
+}
+
+/* Put an array of dwords in to main memory */
+static inline int put_dwords(OHCIState *ohci,
+                             uint32_t addr, uint32_t *buf, int num)
+{
+    int i;
+
+    addr += ohci->localmem_base;
+
+    for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
+        uint32_t tmp = cpu_to_le32(*buf);
+        cpu_physical_memory_write(addr, &tmp, sizeof(tmp));
+    }
+
+    return 1;
+}
+
+/* Get an array of words from main memory */
+static inline int get_words(OHCIState *ohci,
+                            uint32_t addr, uint16_t *buf, int num)
+{
+    int i;
+
+    addr += ohci->localmem_base;
+
+    for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
+        cpu_physical_memory_read(addr, buf, sizeof(*buf));
+        *buf = le16_to_cpu(*buf);
+    }
+
+    return 1;
+}
+
+/* Put an array of words in to main memory */
+static inline int put_words(OHCIState *ohci,
+                            uint32_t addr, uint16_t *buf, int num)
+{
+    int i;
+
+    addr += ohci->localmem_base;
+
+    for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
+        uint16_t tmp = cpu_to_le16(*buf);
+        cpu_physical_memory_write(addr, &tmp, sizeof(tmp));
+    }
+
+    return 1;
+}
+
+static inline int ohci_read_ed(OHCIState *ohci,
+                               uint32_t addr, struct ohci_ed *ed)
+{
+    return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2);
+}
+
+static inline int ohci_read_td(OHCIState *ohci,
+                               uint32_t addr, struct ohci_td *td)
+{
+    return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2);
+}
+
+static inline int ohci_read_iso_td(OHCIState *ohci,
+                                   uint32_t addr, struct ohci_iso_td *td)
+{
+    return (get_dwords(ohci, addr, (uint32_t *)td, 4) &&
+            get_words(ohci, addr + 16, td->offset, 8));
+}
+
+static inline int ohci_read_hcca(OHCIState *ohci,
+                                 uint32_t addr, struct ohci_hcca *hcca)
+{
+    cpu_physical_memory_read(addr + ohci->localmem_base, hcca, sizeof(*hcca));
+    return 1;
+}
+
+static inline int ohci_put_ed(OHCIState *ohci,
+                              uint32_t addr, struct ohci_ed *ed)
+{
+    return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2);
+}
+
+static inline int ohci_put_td(OHCIState *ohci,
+                              uint32_t addr, struct ohci_td *td)
+{
+    return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2);
+}
+
+static inline int ohci_put_iso_td(OHCIState *ohci,
+                                  uint32_t addr, struct ohci_iso_td *td)
+{
+    return (put_dwords(ohci, addr, (uint32_t *)td, 4) &&
+            put_words(ohci, addr + 16, td->offset, 8));
+}
+
+static inline int ohci_put_hcca(OHCIState *ohci,
+                                uint32_t addr, struct ohci_hcca *hcca)
+{
+    cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca));
+    return 1;
+}
+
+/* Read/Write the contents of a TD from/to main memory.  */
+static void ohci_copy_td(OHCIState *ohci, struct ohci_td *td,
+                         uint8_t *buf, int len, int write)
+{
+    uint32_t ptr;
+    uint32_t n;
+
+    ptr = td->cbp;
+    n = 0x1000 - (ptr & 0xfff);
+    if (n > len)
+        n = len;
+    cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write);
+    if (n == len)
+        return;
+    ptr = td->be & ~0xfffu;
+    buf += n;
+    cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write);
+}
+
+/* Read/Write the contents of an ISO TD from/to main memory.  */
+static void ohci_copy_iso_td(OHCIState *ohci,
+                             uint32_t start_addr, uint32_t end_addr,
+                             uint8_t *buf, int len, int write)
+{
+    uint32_t ptr;
+    uint32_t n;
+
+    ptr = start_addr;
+    n = 0x1000 - (ptr & 0xfff);
+    if (n > len)
+        n = len;
+    cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write);
+    if (n == len)
+        return;
+    ptr = end_addr & ~0xfffu;
+    buf += n;
+    cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write);
+}
+
+static void ohci_process_lists(OHCIState *ohci, int completion);
+
+static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
+{
+    OHCIState *ohci = container_of(packet, OHCIState, usb_packet);
+#ifdef DEBUG_PACKET
+    DPRINTF("Async packet complete\n");
+#endif
+    ohci->async_complete = 1;
+    ohci_process_lists(ohci, 1);
+}
+
+#define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b)))
+
+static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
+                               int completion)
+{
+    int dir;
+    size_t len = 0;
+#ifdef DEBUG_ISOCH
+    const char *str = NULL;
+#endif
+    int pid;
+    int ret;
+    int i;
+    USBDevice *dev;
+    USBEndpoint *ep;
+    struct ohci_iso_td iso_td;
+    uint32_t addr;
+    uint16_t starting_frame;
+    int16_t relative_frame_number;
+    int frame_count;
+    uint32_t start_offset, next_offset, end_offset = 0;
+    uint32_t start_addr, end_addr;
+
+    addr = ed->head & OHCI_DPTR_MASK;
+
+    if (!ohci_read_iso_td(ohci, addr, &iso_td)) {
+        printf("usb-ohci: ISO_TD read error at %x\n", addr);
+        return 0;
+    }
+
+    starting_frame = OHCI_BM(iso_td.flags, TD_SF);
+    frame_count = OHCI_BM(iso_td.flags, TD_FC);
+    relative_frame_number = USUB(ohci->frame_number, starting_frame); 
+
+#ifdef DEBUG_ISOCH
+    printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n"
+           "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
+           "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
+           "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
+           "frame_number 0x%.8x starting_frame 0x%.8x\n"
+           "frame_count  0x%.8x relative %d\n"
+           "di 0x%.8x cc 0x%.8x\n",
+           ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK,
+           iso_td.flags, iso_td.bp, iso_td.next, iso_td.be,
+           iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3],
+           iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7],
+           ohci->frame_number, starting_frame, 
+           frame_count, relative_frame_number,         
+           OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC));
+#endif
+
+    if (relative_frame_number < 0) {
+        DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number);
+        return 1;
+    } else if (relative_frame_number > frame_count) {
+        /* ISO TD expired - retire the TD to the Done Queue and continue with
+           the next ISO TD of the same ED */
+        DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, 
+               frame_count);
+        OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
+        ed->head &= ~OHCI_DPTR_MASK;
+        ed->head |= (iso_td.next & OHCI_DPTR_MASK);
+        iso_td.next = ohci->done;
+        ohci->done = addr;
+        i = OHCI_BM(iso_td.flags, TD_DI);
+        if (i < ohci->done_count)
+            ohci->done_count = i;
+        ohci_put_iso_td(ohci, addr, &iso_td);
+        return 0;
+    }
+
+    dir = OHCI_BM(ed->flags, ED_D);
+    switch (dir) {
+    case OHCI_TD_DIR_IN:
+#ifdef DEBUG_ISOCH
+        str = "in";
+#endif
+        pid = USB_TOKEN_IN;
+        break;
+    case OHCI_TD_DIR_OUT:
+#ifdef DEBUG_ISOCH
+        str = "out";
+#endif
+        pid = USB_TOKEN_OUT;
+        break;
+    case OHCI_TD_DIR_SETUP:
+#ifdef DEBUG_ISOCH
+        str = "setup";
+#endif
+        pid = USB_TOKEN_SETUP;
+        break;
+    default:
+        printf("usb-ohci: Bad direction %d\n", dir);
+        return 1;
+    }
+
+    if (!iso_td.bp || !iso_td.be) {
+        printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be);
+        return 1;
+    }
+
+    start_offset = iso_td.offset[relative_frame_number];
+    next_offset = iso_td.offset[relative_frame_number + 1];
+
+    if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || 
+        ((relative_frame_number < frame_count) && 
+         !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) {
+        printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n",
+               start_offset, next_offset);
+        return 1;
+    }
+
+    if ((relative_frame_number < frame_count) && (start_offset > next_offset)) {
+        printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n",
+                start_offset, next_offset);
+        return 1;
+    }
+
+    if ((start_offset & 0x1000) == 0) {
+        start_addr = (iso_td.bp & OHCI_PAGE_MASK) |
+            (start_offset & OHCI_OFFSET_MASK);
+    } else {
+        start_addr = (iso_td.be & OHCI_PAGE_MASK) |
+            (start_offset & OHCI_OFFSET_MASK);
+    }
+
+    if (relative_frame_number < frame_count) {
+        end_offset = next_offset - 1;
+        if ((end_offset & 0x1000) == 0) {
+            end_addr = (iso_td.bp & OHCI_PAGE_MASK) |
+                (end_offset & OHCI_OFFSET_MASK);
+        } else {
+            end_addr = (iso_td.be & OHCI_PAGE_MASK) |
+                (end_offset & OHCI_OFFSET_MASK);
+        }
+    } else {
+        /* Last packet in the ISO TD */
+        end_addr = iso_td.be;
+    }
+
+    if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) {
+        len = (end_addr & OHCI_OFFSET_MASK) + 0x1001
+            - (start_addr & OHCI_OFFSET_MASK);
+    } else {
+        len = end_addr - start_addr + 1;
+    }
+
+    if (len && dir != OHCI_TD_DIR_IN) {
+        ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 0);
+    }
+
+    if (completion) {
+        ret = ohci->usb_packet.result;
+    } else {
+        dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
+        ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
+        usb_packet_setup(&ohci->usb_packet, pid, ep);
+        usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len);
+        ret = usb_handle_packet(dev, &ohci->usb_packet);
+        if (ret == USB_RET_ASYNC) {
+            return 1;
+        }
+    }
+
+#ifdef DEBUG_ISOCH
+    printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n",
+           start_offset, end_offset, start_addr, end_addr, str, len, ret);
+#endif
+
+    /* Writeback */
+    if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) {
+        /* IN transfer succeeded */
+        ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 1);
+        OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                    OHCI_CC_NOERROR);
+        OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret);
+    } else if (dir == OHCI_TD_DIR_OUT && ret == len) {
+        /* OUT transfer succeeded */
+        OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                    OHCI_CC_NOERROR);
+        OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0);
+    } else {
+        if (ret > (ssize_t) len) {
+            printf("usb-ohci: DataOverrun %d > %zu\n", ret, len);
+            OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                        OHCI_CC_DATAOVERRUN);
+            OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
+                        len);
+        } else if (ret >= 0) {
+            printf("usb-ohci: DataUnderrun %d\n", ret);
+            OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                        OHCI_CC_DATAUNDERRUN);
+        } else {
+            switch (ret) {
+            case USB_RET_IOERROR:
+            case USB_RET_NODEV:
+                OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                            OHCI_CC_DEVICENOTRESPONDING);
+                OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
+                            0);
+                break;
+            case USB_RET_NAK:
+            case USB_RET_STALL:
+                printf("usb-ohci: got NAK/STALL %d\n", ret);
+                OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                            OHCI_CC_STALL);
+                OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
+                            0);
+                break;
+            default:
+                printf("usb-ohci: Bad device response %d\n", ret);
+                OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
+                            OHCI_CC_UNDEXPETEDPID);
+                break;
+            }
+        }
+    }
+
+    if (relative_frame_number == frame_count) {
+        /* Last data packet of ISO TD - retire the TD to the Done Queue */
+        OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR);
+        ed->head &= ~OHCI_DPTR_MASK;
+        ed->head |= (iso_td.next & OHCI_DPTR_MASK);
+        iso_td.next = ohci->done;
+        ohci->done = addr;
+        i = OHCI_BM(iso_td.flags, TD_DI);
+        if (i < ohci->done_count)
+            ohci->done_count = i;
+    }
+    ohci_put_iso_td(ohci, addr, &iso_td);
+    return 1;
+}
+
+/* Service a transport descriptor.
+   Returns nonzero to terminate processing of this endpoint.  */
+
+static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
+{
+    int dir;
+    size_t len = 0, pktlen = 0;
+#ifdef DEBUG_PACKET
+    const char *str = NULL;
+#endif
+    int pid;
+    int ret;
+    int i;
+    USBDevice *dev;
+    USBEndpoint *ep;
+    struct ohci_td td;
+    uint32_t addr;
+    int flag_r;
+    int completion;
+
+    addr = ed->head & OHCI_DPTR_MASK;
+    /* See if this TD has already been submitted to the device.  */
+    completion = (addr == ohci->async_td);
+    if (completion && !ohci->async_complete) {
+#ifdef DEBUG_PACKET
+        DPRINTF("Skipping async TD\n");
+#endif
+        return 1;
+    }
+    if (!ohci_read_td(ohci, addr, &td)) {
+        fprintf(stderr, "usb-ohci: TD read error at %x\n", addr);
+        return 0;
+    }
+
+    dir = OHCI_BM(ed->flags, ED_D);
+    switch (dir) {
+    case OHCI_TD_DIR_OUT:
+    case OHCI_TD_DIR_IN:
+        /* Same value.  */
+        break;
+    default:
+        dir = OHCI_BM(td.flags, TD_DP);
+        break;
+    }
+
+    switch (dir) {
+    case OHCI_TD_DIR_IN:
+#ifdef DEBUG_PACKET
+        str = "in";
+#endif
+        pid = USB_TOKEN_IN;
+        break;
+    case OHCI_TD_DIR_OUT:
+#ifdef DEBUG_PACKET
+        str = "out";
+#endif
+        pid = USB_TOKEN_OUT;
+        break;
+    case OHCI_TD_DIR_SETUP:
+#ifdef DEBUG_PACKET
+        str = "setup";
+#endif
+        pid = USB_TOKEN_SETUP;
+        break;
+    default:
+        fprintf(stderr, "usb-ohci: Bad direction\n");
+        return 1;
+    }
+    if (td.cbp && td.be) {
+        if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) {
+            len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff);
+        } else {
+            len = (td.be - td.cbp) + 1;
+        }
+
+        pktlen = len;
+        if (len && dir != OHCI_TD_DIR_IN) {
+            /* The endpoint may not allow us to transfer it all now */
+            pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT;
+            if (pktlen > len) {
+                pktlen = len;
+            }
+            if (!completion) {
+                ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 0);
+            }
+        }
+    }
+
+    flag_r = (td.flags & OHCI_TD_R) != 0;
+#ifdef DEBUG_PACKET
+    DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64
+            " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n",
+            addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be);
+
+    if (pktlen > 0 && dir != OHCI_TD_DIR_IN) {
+        DPRINTF("  data:");
+        for (i = 0; i < pktlen; i++) {
+            printf(" %.2x", ohci->usb_buf[i]);
+        }
+        DPRINTF("\n");
+    }
+#endif
+    if (completion) {
+        ret = ohci->usb_packet.result;
+        ohci->async_td = 0;
+        ohci->async_complete = 0;
+    } else {
+        if (ohci->async_td) {
+            /* ??? The hardware should allow one active packet per
+               endpoint.  We only allow one active packet per controller.
+               This should be sufficient as long as devices respond in a
+               timely manner.
+            */
+#ifdef DEBUG_PACKET
+            DPRINTF("Too many pending packets\n");
+#endif
+            return 1;
+        }
+        dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
+        ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
+        usb_packet_setup(&ohci->usb_packet, pid, ep);
+        usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen);
+        ret = usb_handle_packet(dev, &ohci->usb_packet);
+#ifdef DEBUG_PACKET
+        DPRINTF("ret=%d\n", ret);
+#endif
+        if (ret == USB_RET_ASYNC) {
+            ohci->async_td = addr;
+            return 1;
+        }
+    }
+    if (ret >= 0) {
+        if (dir == OHCI_TD_DIR_IN) {
+            ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1);
+#ifdef DEBUG_PACKET
+            DPRINTF("  data:");
+            for (i = 0; i < ret; i++)
+                printf(" %.2x", ohci->usb_buf[i]);
+            DPRINTF("\n");
+#endif
+        } else {
+            ret = pktlen;
+        }
+    }
+
+    /* Writeback */
+    if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) {
+        /* Transmission succeeded.  */
+        if (ret == len) {
+            td.cbp = 0;
+        } else {
+            if ((td.cbp & 0xfff) + ret > 0xfff) {
+                td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff);
+            } else {
+                td.cbp += ret;
+            }
+        }
+        td.flags |= OHCI_TD_T1;
+        td.flags ^= OHCI_TD_T0;
+        OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR);
+        OHCI_SET_BM(td.flags, TD_EC, 0);
+
+        if ((dir != OHCI_TD_DIR_IN) && (ret != len)) {
+            /* Partial packet transfer: TD not ready to retire yet */
+            goto exit_no_retire;
+        }
+
+        /* Setting ED_C is part of the TD retirement process */
+        ed->head &= ~OHCI_ED_C;
+        if (td.flags & OHCI_TD_T0)
+            ed->head |= OHCI_ED_C;
+    } else {
+        if (ret >= 0) {
+            DPRINTF("usb-ohci: Underrun\n");
+            OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN);
+        } else {
+            switch (ret) {
+            case USB_RET_IOERROR:
+            case USB_RET_NODEV:
+                OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING);
+            case USB_RET_NAK:
+                DPRINTF("usb-ohci: got NAK\n");
+                return 1;
+            case USB_RET_STALL:
+                DPRINTF("usb-ohci: got STALL\n");
+                OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL);
+                break;
+            case USB_RET_BABBLE:
+                DPRINTF("usb-ohci: got BABBLE\n");
+                OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
+                break;
+            default:
+                fprintf(stderr, "usb-ohci: Bad device response %d\n", ret);
+                OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID);
+                OHCI_SET_BM(td.flags, TD_EC, 3);
+                break;
+            }
+        }
+        ed->head |= OHCI_ED_H;
+    }
+
+    /* Retire this TD */
+    ed->head &= ~OHCI_DPTR_MASK;
+    ed->head |= td.next & OHCI_DPTR_MASK;
+    td.next = ohci->done;
+    ohci->done = addr;
+    i = OHCI_BM(td.flags, TD_DI);
+    if (i < ohci->done_count)
+        ohci->done_count = i;
+exit_no_retire:
+    ohci_put_td(ohci, addr, &td);
+    return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR;
+}
+
+/* Service an endpoint list.  Returns nonzero if active TD were found.  */
+static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion)
+{
+    struct ohci_ed ed;
+    uint32_t next_ed;
+    uint32_t cur;
+    int active;
+
+    active = 0;
+
+    if (head == 0)
+        return 0;
+
+    for (cur = head; cur; cur = next_ed) {
+        if (!ohci_read_ed(ohci, cur, &ed)) {
+            fprintf(stderr, "usb-ohci: ED read error at %x\n", cur);
+            return 0;
+        }
+
+        next_ed = ed.next & OHCI_DPTR_MASK;
+
+        if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) {
+            uint32_t addr;
+            /* Cancel pending packets for ED that have been paused.  */
+            addr = ed.head & OHCI_DPTR_MASK;
+            if (ohci->async_td && addr == ohci->async_td) {
+                usb_cancel_packet(&ohci->usb_packet);
+                ohci->async_td = 0;
+            }
+            continue;
+        }
+
+        while ((ed.head & OHCI_DPTR_MASK) != ed.tail) {
+#ifdef DEBUG_PACKET
+            DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u "
+                    "h=%u c=%u\n  head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur,
+                    OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN),
+                    OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0,
+                    (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0,
+                    OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0,
+                    (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK,
+                    ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK);
+#endif
+            active = 1;
+
+            if ((ed.flags & OHCI_ED_F) == 0) {
+                if (ohci_service_td(ohci, &ed))
+                    break;
+            } else {
+                /* Handle isochronous endpoints */
+                if (ohci_service_iso_td(ohci, &ed, completion))
+                    break;
+            }
+        }
+
+        ohci_put_ed(ohci, cur, &ed);
+    }
+
+    return active;
+}
+
+/* Generate a SOF event, and set a timer for EOF */
+static void ohci_sof(OHCIState *ohci)
+{
+    ohci->sof_time = qemu_get_clock_ns(vm_clock);
+    qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time);
+    ohci_set_interrupt(ohci, OHCI_INTR_SF);
+}
+
+/* Process Control and Bulk lists.  */
+static void ohci_process_lists(OHCIState *ohci, int completion)
+{
+    if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) {
+        if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) {
+            DPRINTF("usb-ohci: head %x, cur %x\n",
+                    ohci->ctrl_head, ohci->ctrl_cur);
+        }
+        if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) {
+            ohci->ctrl_cur = 0;
+            ohci->status &= ~OHCI_STATUS_CLF;
+        }
+    }
+
+    if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) {
+        if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) {
+            ohci->bulk_cur = 0;
+            ohci->status &= ~OHCI_STATUS_BLF;
+        }
+    }
+}
+
+/* Do frame processing on frame boundary */
+static void ohci_frame_boundary(void *opaque)
+{
+    OHCIState *ohci = opaque;
+    struct ohci_hcca hcca;
+
+    ohci_read_hcca(ohci, ohci->hcca, &hcca);
+
+    /* Process all the lists at the end of the frame */
+    if (ohci->ctl & OHCI_CTL_PLE) {
+        int n;
+
+        n = ohci->frame_number & 0x1f;
+        ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0);
+    }
+
+    /* Cancel all pending packets if either of the lists has been disabled.  */
+    if (ohci->async_td &&
+        ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) {
+        usb_cancel_packet(&ohci->usb_packet);
+        ohci->async_td = 0;
+    }
+    ohci->old_ctl = ohci->ctl;
+    ohci_process_lists(ohci, 0);
+
+    /* Frame boundary, so do EOF stuf here */
+    ohci->frt = ohci->fit;
+
+    /* Increment frame number and take care of endianness. */
+    ohci->frame_number = (ohci->frame_number + 1) & 0xffff;
+    hcca.frame = cpu_to_le16(ohci->frame_number);
+
+    if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
+        if (!ohci->done)
+            abort();
+        if (ohci->intr & ohci->intr_status)
+            ohci->done |= 1;
+        hcca.done = cpu_to_le32(ohci->done);
+        ohci->done = 0;
+        ohci->done_count = 7;
+        ohci_set_interrupt(ohci, OHCI_INTR_WD);
+    }
+
+    if (ohci->done_count != 7 && ohci->done_count != 0)
+        ohci->done_count--;
+
+    /* Do SOF stuff here */
+    ohci_sof(ohci);
+
+    /* Writeback HCCA */
+    ohci_put_hcca(ohci, ohci->hcca, &hcca);
+}
+
+/* Start sending SOF tokens across the USB bus, lists are processed in
+ * next frame
+ */
+static int ohci_bus_start(OHCIState *ohci)
+{
+    ohci->eof_timer = qemu_new_timer_ns(vm_clock,
+                    ohci_frame_boundary,
+                    ohci);
+
+    if (ohci->eof_timer == NULL) {
+        fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name);
+        /* TODO: Signal unrecoverable error */
+        return 0;
+    }
+
+    DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name);
+
+    ohci_sof(ohci);
+
+    return 1;
+}
+
+/* Stop sending SOF tokens on the bus */
+static void ohci_bus_stop(OHCIState *ohci)
+{
+    if (ohci->eof_timer)
+        qemu_del_timer(ohci->eof_timer);
+    ohci->eof_timer = NULL;
+}
+
+/* Sets a flag in a port status register but only set it if the port is
+ * connected, if not set ConnectStatusChange flag. If flag is enabled
+ * return 1.
+ */
+static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val)
+{
+    int ret = 1;
+
+    /* writing a 0 has no effect */
+    if (val == 0)
+        return 0;
+
+    /* If CurrentConnectStatus is cleared we set
+     * ConnectStatusChange
+     */
+    if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) {
+        ohci->rhport[i].ctrl |= OHCI_PORT_CSC;
+        if (ohci->rhstatus & OHCI_RHS_DRWE) {
+            /* TODO: CSC is a wakeup event */
+        }
+        return 0;
+    }
+
+    if (ohci->rhport[i].ctrl & val)
+        ret = 0;
+
+    /* set the bit */
+    ohci->rhport[i].ctrl |= val;
+
+    return ret;
+}
+
+/* Set the frame interval - frame interval toggle is manipulated by the hcd only */
+static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val)
+{
+    val &= OHCI_FMI_FI;
+
+    if (val != ohci->fi) {
+        DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n",
+            ohci->name, ohci->fi, ohci->fi);
+    }
+
+    ohci->fi = val;
+}
+
+static void ohci_port_power(OHCIState *ohci, int i, int p)
+{
+    if (p) {
+        ohci->rhport[i].ctrl |= OHCI_PORT_PPS;
+    } else {
+        ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS|
+                    OHCI_PORT_CCS|
+                    OHCI_PORT_PSS|
+                    OHCI_PORT_PRS);
+    }
+}
+
+/* Set HcControlRegister */
+static void ohci_set_ctl(OHCIState *ohci, uint32_t val)
+{
+    uint32_t old_state;
+    uint32_t new_state;
+
+    old_state = ohci->ctl & OHCI_CTL_HCFS;
+    ohci->ctl = val;
+    new_state = ohci->ctl & OHCI_CTL_HCFS;
+
+    /* no state change */
+    if (old_state == new_state)
+        return;
+
+    switch (new_state) {
+    case OHCI_USB_OPERATIONAL:
+        ohci_bus_start(ohci);
+        break;
+    case OHCI_USB_SUSPEND:
+        ohci_bus_stop(ohci);
+        DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name);
+        break;
+    case OHCI_USB_RESUME:
+        DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name);
+        break;
+    case OHCI_USB_RESET:
+        ohci_reset(ohci);
+        DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name);
+        break;
+    }
+}
+
+static uint32_t ohci_get_frame_remaining(OHCIState *ohci)
+{
+    uint16_t fr;
+    int64_t tks;
+
+    if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL)
+        return (ohci->frt << 31);
+
+    /* Being in USB operational state guarnatees sof_time was
+     * set already.
+     */
+    tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time;
+
+    /* avoid muldiv if possible */
+    if (tks >= usb_frame_time)
+        return (ohci->frt << 31);
+
+    tks = muldiv64(1, tks, usb_bit_time);
+    fr = (uint16_t)(ohci->fi - tks);
+
+    return (ohci->frt << 31) | fr;
+}
+
+
+/* Set root hub status */
+static void ohci_set_hub_status(OHCIState *ohci, uint32_t val)
+{
+    uint32_t old_state;
+
+    old_state = ohci->rhstatus;
+
+    /* write 1 to clear OCIC */
+    if (val & OHCI_RHS_OCIC)
+        ohci->rhstatus &= ~OHCI_RHS_OCIC;
+
+    if (val & OHCI_RHS_LPS) {
+        int i;
+
+        for (i = 0; i < ohci->num_ports; i++)
+            ohci_port_power(ohci, i, 0);
+        DPRINTF("usb-ohci: powered down all ports\n");
+    }
+
+    if (val & OHCI_RHS_LPSC) {
+        int i;
+
+        for (i = 0; i < ohci->num_ports; i++)
+            ohci_port_power(ohci, i, 1);
+        DPRINTF("usb-ohci: powered up all ports\n");
+    }
+
+    if (val & OHCI_RHS_DRWE)
+        ohci->rhstatus |= OHCI_RHS_DRWE;
+
+    if (val & OHCI_RHS_CRWE)
+        ohci->rhstatus &= ~OHCI_RHS_DRWE;
+
+    if (old_state != ohci->rhstatus)
+        ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
+}
+
+/* Set root hub port status */
+static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val)
+{
+    uint32_t old_state;
+    OHCIPort *port;
+
+    port = &ohci->rhport[portnum];
+    old_state = port->ctrl;
+
+    /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */
+    if (val & OHCI_PORT_WTC)
+        port->ctrl &= ~(val & OHCI_PORT_WTC);
+
+    if (val & OHCI_PORT_CCS)
+        port->ctrl &= ~OHCI_PORT_PES;
+
+    ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES);
+
+    if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) {
+        DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
+    }
+
+    if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) {
+        DPRINTF("usb-ohci: port %d: RESET\n", portnum);
+        usb_device_reset(port->port.dev);
+        port->ctrl &= ~OHCI_PORT_PRS;
+        /* ??? Should this also set OHCI_PORT_PESC.  */
+        port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC;
+    }
+
+    /* Invert order here to ensure in ambiguous case, device is
+     * powered up...
+     */
+    if (val & OHCI_PORT_LSDA)
+        ohci_port_power(ohci, portnum, 0);
+    if (val & OHCI_PORT_PPS)
+        ohci_port_power(ohci, portnum, 1);
+
+    if (old_state != port->ctrl)
+        ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
+
+    return;
+}
+
+static uint64_t ohci_mem_read(void *opaque,
+                              target_phys_addr_t addr,
+                              unsigned size)
+{
+    OHCIState *ohci = opaque;
+    uint32_t retval;
+
+    /* Only aligned reads are allowed on OHCI */
+    if (addr & 3) {
+        fprintf(stderr, "usb-ohci: Mis-aligned read\n");
+        return 0xffffffff;
+    } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) {
+        /* HcRhPortStatus */
+        retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS;
+    } else {
+        switch (addr >> 2) {
+        case 0: /* HcRevision */
+            retval = 0x10;
+            break;
+
+        case 1: /* HcControl */
+            retval = ohci->ctl;
+            break;
+
+        case 2: /* HcCommandStatus */
+            retval = ohci->status;
+            break;
+
+        case 3: /* HcInterruptStatus */
+            retval = ohci->intr_status;
+            break;
+
+        case 4: /* HcInterruptEnable */
+        case 5: /* HcInterruptDisable */
+            retval = ohci->intr;
+            break;
+
+        case 6: /* HcHCCA */
+            retval = ohci->hcca;
+            break;
+
+        case 7: /* HcPeriodCurrentED */
+            retval = ohci->per_cur;
+            break;
+
+        case 8: /* HcControlHeadED */
+            retval = ohci->ctrl_head;
+            break;
+
+        case 9: /* HcControlCurrentED */
+            retval = ohci->ctrl_cur;
+            break;
+
+        case 10: /* HcBulkHeadED */
+            retval = ohci->bulk_head;
+            break;
+
+        case 11: /* HcBulkCurrentED */
+            retval = ohci->bulk_cur;
+            break;
+
+        case 12: /* HcDoneHead */
+            retval = ohci->done;
+            break;
+
+        case 13: /* HcFmInterretval */
+            retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi);
+            break;
+
+        case 14: /* HcFmRemaining */
+            retval = ohci_get_frame_remaining(ohci);
+            break;
+
+        case 15: /* HcFmNumber */
+            retval = ohci->frame_number;
+            break;
+
+        case 16: /* HcPeriodicStart */
+            retval = ohci->pstart;
+            break;
+
+        case 17: /* HcLSThreshold */
+            retval = ohci->lst;
+            break;
+
+        case 18: /* HcRhDescriptorA */
+            retval = ohci->rhdesc_a;
+            break;
+
+        case 19: /* HcRhDescriptorB */
+            retval = ohci->rhdesc_b;
+            break;
+
+        case 20: /* HcRhStatus */
+            retval = ohci->rhstatus;
+            break;
+
+        /* PXA27x specific registers */
+        case 24: /* HcStatus */
+            retval = ohci->hstatus & ohci->hmask;
+            break;
+
+        case 25: /* HcHReset */
+            retval = ohci->hreset;
+            break;
+
+        case 26: /* HcHInterruptEnable */
+            retval = ohci->hmask;
+            break;
+
+        case 27: /* HcHInterruptTest */
+            retval = ohci->htest;
+            break;
+
+        default:
+            fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr);
+            retval = 0xffffffff;
+        }
+    }
+
+    return retval;
+}
+
+static void ohci_mem_write(void *opaque,
+                           target_phys_addr_t addr,
+                           uint64_t val,
+                           unsigned size)
+{
+    OHCIState *ohci = opaque;
+
+    /* Only aligned reads are allowed on OHCI */
+    if (addr & 3) {
+        fprintf(stderr, "usb-ohci: Mis-aligned write\n");
+        return;
+    }
+
+    if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) {
+        /* HcRhPortStatus */
+        ohci_port_set_status(ohci, (addr - 0x54) >> 2, val);
+        return;
+    }
+
+    switch (addr >> 2) {
+    case 1: /* HcControl */
+        ohci_set_ctl(ohci, val);
+        break;
+
+    case 2: /* HcCommandStatus */
+        /* SOC is read-only */
+        val = (val & ~OHCI_STATUS_SOC);
+
+        /* Bits written as '0' remain unchanged in the register */
+        ohci->status |= val;
+
+        if (ohci->status & OHCI_STATUS_HCR)
+            ohci_reset(ohci);
+        break;
+
+    case 3: /* HcInterruptStatus */
+        ohci->intr_status &= ~val;
+        ohci_intr_update(ohci);
+        break;
+
+    case 4: /* HcInterruptEnable */
+        ohci->intr |= val;
+        ohci_intr_update(ohci);
+        break;
+
+    case 5: /* HcInterruptDisable */
+        ohci->intr &= ~val;
+        ohci_intr_update(ohci);
+        break;
+
+    case 6: /* HcHCCA */
+        ohci->hcca = val & OHCI_HCCA_MASK;
+        break;
+
+    case 7: /* HcPeriodCurrentED */
+        /* Ignore writes to this read-only register, Linux does them */
+        break;
+
+    case 8: /* HcControlHeadED */
+        ohci->ctrl_head = val & OHCI_EDPTR_MASK;
+        break;
+
+    case 9: /* HcControlCurrentED */
+        ohci->ctrl_cur = val & OHCI_EDPTR_MASK;
+        break;
+
+    case 10: /* HcBulkHeadED */
+        ohci->bulk_head = val & OHCI_EDPTR_MASK;
+        break;
+
+    case 11: /* HcBulkCurrentED */
+        ohci->bulk_cur = val & OHCI_EDPTR_MASK;
+        break;
+
+    case 13: /* HcFmInterval */
+        ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16;
+        ohci->fit = (val & OHCI_FMI_FIT) >> 31;
+        ohci_set_frame_interval(ohci, val);
+        break;
+
+    case 15: /* HcFmNumber */
+        break;
+
+    case 16: /* HcPeriodicStart */
+        ohci->pstart = val & 0xffff;
+        break;
+
+    case 17: /* HcLSThreshold */
+        ohci->lst = val & 0xffff;
+        break;
+
+    case 18: /* HcRhDescriptorA */
+        ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK;
+        ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK;
+        break;
+
+    case 19: /* HcRhDescriptorB */
+        break;
+
+    case 20: /* HcRhStatus */
+        ohci_set_hub_status(ohci, val);
+        break;
+
+    /* PXA27x specific registers */
+    case 24: /* HcStatus */
+        ohci->hstatus &= ~(val & ohci->hmask);
+
+    case 25: /* HcHReset */
+        ohci->hreset = val & ~OHCI_HRESET_FSBIR;
+        if (val & OHCI_HRESET_FSBIR)
+            ohci_reset(ohci);
+        break;
+
+    case 26: /* HcHInterruptEnable */
+        ohci->hmask = val;
+        break;
+
+    case 27: /* HcHInterruptTest */
+        ohci->htest = val;
+        break;
+
+    default:
+        fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr);
+        break;
+    }
+}
+
+static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
+{
+    if (ohci->async_td &&
+        usb_packet_is_inflight(&ohci->usb_packet) &&
+        ohci->usb_packet.ep->dev == dev) {
+        usb_cancel_packet(&ohci->usb_packet);
+        ohci->async_td = 0;
+    }
+}
+
+static const MemoryRegionOps ohci_mem_ops = {
+    .read = ohci_mem_read,
+    .write = ohci_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static USBPortOps ohci_port_ops = {
+    .attach = ohci_attach,
+    .detach = ohci_detach,
+    .child_detach = ohci_child_detach,
+    .wakeup = ohci_wakeup,
+    .complete = ohci_async_complete_packet,
+};
+
+static USBBusOps ohci_bus_ops = {
+};
+
+static int usb_ohci_init(OHCIState *ohci, DeviceState *dev,
+                         int num_ports, uint32_t localmem_base,
+                         char *masterbus, uint32_t firstport)
+{
+    int i;
+
+    if (usb_frame_time == 0) {
+#ifdef OHCI_TIME_WARP
+        usb_frame_time = get_ticks_per_sec();
+        usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000);
+#else
+        usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000);
+        if (get_ticks_per_sec() >= USB_HZ) {
+            usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ);
+        } else {
+            usb_bit_time = 1;
+        }
+#endif
+        DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n",
+                usb_frame_time, usb_bit_time);
+    }
+
+    ohci->num_ports = num_ports;
+    if (masterbus) {
+        USBPort *ports[OHCI_MAX_PORTS];
+        for(i = 0; i < num_ports; i++) {
+            ports[i] = &ohci->rhport[i].port;
+        }
+        if (usb_register_companion(masterbus, ports, num_ports,
+                firstport, ohci, &ohci_port_ops,
+                USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) {
+            return -1;
+        }
+    } else {
+        usb_bus_new(&ohci->bus, &ohci_bus_ops, dev);
+        for (i = 0; i < num_ports; i++) {
+            usb_register_port(&ohci->bus, &ohci->rhport[i].port,
+                              ohci, i, &ohci_port_ops,
+                              USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
+        }
+    }
+
+    memory_region_init_io(&ohci->mem, &ohci_mem_ops, ohci, "ohci", 256);
+    ohci->localmem_base = localmem_base;
+
+    ohci->name = object_get_typename(OBJECT(dev));
+    usb_packet_init(&ohci->usb_packet);
+
+    ohci->async_td = 0;
+    qemu_register_reset(ohci_reset, ohci);
+
+    return 0;
+}
+
+typedef struct {
+    PCIDevice pci_dev;
+    OHCIState state;
+    char *masterbus;
+    uint32_t num_ports;
+    uint32_t firstport;
+} OHCIPCIState;
+
+static int usb_ohci_initfn_pci(struct PCIDevice *dev)
+{
+    OHCIPCIState *ohci = DO_UPCAST(OHCIPCIState, pci_dev, dev);
+
+    ohci->pci_dev.config[PCI_CLASS_PROG] = 0x10; /* OHCI */
+    ohci->pci_dev.config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
+
+    if (usb_ohci_init(&ohci->state, &dev->qdev, ohci->num_ports, 0,
+                      ohci->masterbus, ohci->firstport) != 0) {
+        return -1;
+    }
+    ohci->state.irq = ohci->pci_dev.irq[0];
+
+    /* TODO: avoid cast below by using dev */
+    pci_register_bar(&ohci->pci_dev, 0, 0, &ohci->state.mem);
+    return 0;
+}
+
+void usb_ohci_init_pci(struct PCIBus *bus, int devfn)
+{
+    pci_create_simple(bus, devfn, "pci-ohci");
+}
+
+typedef struct {
+    SysBusDevice busdev;
+    OHCIState ohci;
+    uint32_t num_ports;
+    target_phys_addr_t dma_offset;
+} OHCISysBusState;
+
+static int ohci_init_pxa(SysBusDevice *dev)
+{
+    OHCISysBusState *s = FROM_SYSBUS(OHCISysBusState, dev);
+
+    /* Cannot fail as we pass NULL for masterbus */
+    usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset, NULL, 0);
+    sysbus_init_irq(dev, &s->ohci.irq);
+    sysbus_init_mmio(dev, &s->ohci.mem);
+
+    return 0;
+}
+
+static Property ohci_pci_properties[] = {
+    DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus),
+    DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3),
+    DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ohci_pci_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->init = usb_ohci_initfn_pci;
+    k->vendor_id = PCI_VENDOR_ID_APPLE;
+    k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB;
+    k->class_id = PCI_CLASS_SERIAL_USB;
+    dc->desc = "Apple USB Controller";
+    dc->props = ohci_pci_properties;
+}
+
+static TypeInfo ohci_pci_info = {
+    .name          = "pci-ohci",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(OHCIPCIState),
+    .class_init    = ohci_pci_class_init,
+};
+
+static Property ohci_sysbus_properties[] = {
+    DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3),
+    DEFINE_PROP_TADDR("dma-offset", OHCISysBusState, dma_offset, 3),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ohci_sysbus_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
+
+    sbc->init = ohci_init_pxa;
+    dc->desc = "OHCI USB Controller";
+    dc->props = ohci_sysbus_properties;
+}
+
+static TypeInfo ohci_sysbus_info = {
+    .name          = "sysbus-ohci",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(OHCISysBusState),
+    .class_init    = ohci_sysbus_class_init,
+};
+
+static void ohci_register_types(void)
+{
+    type_register_static(&ohci_pci_info);
+    type_register_static(&ohci_sysbus_info);
+}
+
+type_init(ohci_register_types)