usb: use iovecs in USBPacket

Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.

Note that USBPacket->len was used for two purposes:  First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers.  There
is a new result variable for the latter.  A new status code
was added to catch uninitialized result.

Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 11 insertions, 11 deletions

diff --git a/hw/usb-musb.c b/hw/usb-musb.c
index 035dda8372..d3ccde9199 100644
--- a/hw/usb-musb.c
+++ b/hw/usb-musb.c
@@ -365,6 +365,8 @@ struct MUSBState *musb_init(qemu_irq *irqs)
         s->ep[i].maxp[1] = 0x40;
         s->ep[i].musb = s;
         s->ep[i].epnum = i;
+        usb_packet_init(&s->ep[i].packey[0].p);
+        usb_packet_init(&s->ep[i].packey[1].p);
     }
 
     usb_bus_new(&s->bus, &musb_bus_ops, NULL /* FIXME */);
@@ -605,12 +607,10 @@ static void musb_packet(MUSBState *s, MUSBEndPoint *ep,
     ep->interrupt[dir] = ttype == USB_ENDPOINT_XFER_INT;
     ep->delayed_cb[dir] = cb;
 
-    ep->packey[dir].p.pid = pid;
     /* A wild guess on the FADDR semantics... */
-    ep->packey[dir].p.devaddr = ep->faddr[idx];
-    ep->packey[dir].p.devep = ep->type[idx] & 0xf;
-    ep->packey[dir].p.data = (void *) ep->buf[idx];
-    ep->packey[dir].p.len = len;
+    usb_packet_setup(&ep->packey[dir].p, pid, ep->faddr[idx],
+                     ep->type[idx] & 0xf);
+    usb_packet_addbuf(&ep->packey[dir].p, ep->buf[idx], len);
     ep->packey[dir].ep = ep;
     ep->packey[dir].dir = dir;
 
@@ -738,7 +738,7 @@ static void musb_rx_packet_complete(USBPacket *packey, void *opaque)
 
     if (ep->status[1] == USB_RET_STALL) {
         ep->status[1] = 0;
-        packey->len = 0;
+        packey->result = 0;
 
         ep->csr[1] |= MGC_M_RXCSR_H_RXSTALL;
         if (!epnum)
@@ -752,7 +752,7 @@ static void musb_rx_packet_complete(USBPacket *packey, void *opaque)
          * Data-errors in Isochronous.  */
         if (ep->interrupt[1])
             return musb_packet(s, ep, epnum, USB_TOKEN_IN,
-                            packey->len, musb_rx_packet_complete, 1);
+                            packey->iov.size, musb_rx_packet_complete, 1);
 
         ep->csr[1] |= MGC_M_RXCSR_DATAERROR;
         if (!epnum)
@@ -777,14 +777,14 @@ static void musb_rx_packet_complete(USBPacket *packey, void *opaque)
     /* TODO: check len for over/underruns of an OUT packet?  */
     /* TODO: perhaps make use of e->ext_size[1] here.  */
 
-    packey->len = ep->status[1];
+    packey->result = ep->status[1];
 
     if (!(ep->csr[1] & (MGC_M_RXCSR_H_RXSTALL | MGC_M_RXCSR_DATAERROR))) {
         ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
         if (!epnum)
             ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
 
-        ep->rxcount = packey->len; /* XXX: MIN(packey->len, ep->maxp[1]); */
+        ep->rxcount = packey->result; /* XXX: MIN(packey->len, ep->maxp[1]); */
         /* In DMA mode: assert DMA request for this EP */
     }
 
@@ -856,12 +856,12 @@ static void musb_rx_req(MUSBState *s, int epnum)
      * 64 bytes of the FIFO, only move the FIFO start and return. (Obsolete) */
     if (ep->packey[1].p.pid == USB_TOKEN_IN && ep->status[1] >= 0 &&
                     (ep->fifostart[1]) + ep->rxcount <
-                    ep->packey[1].p.len) {
+                    ep->packey[1].p.iov.size) {
         TRACE("0x%08x, %d",  ep->fifostart[1], ep->rxcount );
         ep->fifostart[1] += ep->rxcount;
         ep->fifolen[1] = 0;
 
-        ep->rxcount = MIN(ep->packey[0].p.len - (ep->fifostart[1]),
+        ep->rxcount = MIN(ep->packey[0].p.iov.size - (ep->fifostart[1]),
                         ep->maxp[1]);
 
         ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;