armv7m: Split systick out from NVIC

The SysTick timer isn't really part of the NVIC proper;
we just modelled it that way back when we couldn't
easily have devices that only occupied a small chunk
of a memory region. Split it out into its own device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

1 files changed, 240 insertions, 0 deletions

diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c
new file mode 100644
index 0000000000..df8d2804b3
--- /dev/null
+++ b/hw/timer/armv7m_systick.c
@@ -0,0 +1,240 @@
+/*
+ * ARMv7M SysTick timer
+ *
+ * Copyright (c) 2006-2007 CodeSourcery.
+ * Written by Paul Brook
+ * Copyright (c) 2017 Linaro Ltd
+ * Written by Peter Maydell
+ *
+ * This code is licensed under the GPL (version 2 or later).
+ */
+
+#include "qemu/osdep.h"
+#include "hw/timer/armv7m_systick.h"
+#include "qemu-common.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "qemu/log.h"
+#include "trace.h"
+
+/* qemu timers run at 1GHz.   We want something closer to 1MHz.  */
+#define SYSTICK_SCALE 1000ULL
+
+#define SYSTICK_ENABLE    (1 << 0)
+#define SYSTICK_TICKINT   (1 << 1)
+#define SYSTICK_CLKSOURCE (1 << 2)
+#define SYSTICK_COUNTFLAG (1 << 16)
+
+int system_clock_scale;
+
+/* Conversion factor from qemu timer to SysTick frequencies.  */
+static inline int64_t systick_scale(SysTickState *s)
+{
+    if (s->control & SYSTICK_CLKSOURCE) {
+        return system_clock_scale;
+    } else {
+        return 1000;
+    }
+}
+
+static void systick_reload(SysTickState *s, int reset)
+{
+    /* The Cortex-M3 Devices Generic User Guide says that "When the
+     * ENABLE bit is set to 1, the counter loads the RELOAD value from the
+     * SYST RVR register and then counts down". So, we need to check the
+     * ENABLE bit before reloading the value.
+     */
+    trace_systick_reload();
+
+    if ((s->control & SYSTICK_ENABLE) == 0) {
+        return;
+    }
+
+    if (reset) {
+        s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    }
+    s->tick += (s->reload + 1) * systick_scale(s);
+    timer_mod(s->timer, s->tick);
+}
+
+static void systick_timer_tick(void *opaque)
+{
+    SysTickState *s = (SysTickState *)opaque;
+
+    trace_systick_timer_tick();
+
+    s->control |= SYSTICK_COUNTFLAG;
+    if (s->control & SYSTICK_TICKINT) {
+        /* Tell the NVIC to pend the SysTick exception */
+        qemu_irq_pulse(s->irq);
+    }
+    if (s->reload == 0) {
+        s->control &= ~SYSTICK_ENABLE;
+    } else {
+        systick_reload(s, 0);
+    }
+}
+
+static uint64_t systick_read(void *opaque, hwaddr addr, unsigned size)
+{
+    SysTickState *s = opaque;
+    uint32_t val;
+
+    switch (addr) {
+    case 0x0: /* SysTick Control and Status.  */
+        val = s->control;
+        s->control &= ~SYSTICK_COUNTFLAG;
+        break;
+    case 0x4: /* SysTick Reload Value.  */
+        val = s->reload;
+        break;
+    case 0x8: /* SysTick Current Value.  */
+    {
+        int64_t t;
+
+        if ((s->control & SYSTICK_ENABLE) == 0) {
+            val = 0;
+            break;
+        }
+        t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        if (t >= s->tick) {
+            val = 0;
+            break;
+        }
+        val = ((s->tick - (t + 1)) / systick_scale(s)) + 1;
+        /* The interrupt in triggered when the timer reaches zero.
+           However the counter is not reloaded until the next clock
+           tick.  This is a hack to return zero during the first tick.  */
+        if (val > s->reload) {
+            val = 0;
+        }
+        break;
+    }
+    case 0xc: /* SysTick Calibration Value.  */
+        val = 10000;
+        break;
+    default:
+        val = 0;
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SysTick: Bad read offset 0x%" HWADDR_PRIx "\n", addr);
+        break;
+    }
+
+    trace_systick_read(addr, val, size);
+    return val;
+}
+
+static void systick_write(void *opaque, hwaddr addr,
+                          uint64_t value, unsigned size)
+{
+    SysTickState *s = opaque;
+
+    trace_systick_write(addr, value, size);
+
+    switch (addr) {
+    case 0x0: /* SysTick Control and Status.  */
+    {
+        uint32_t oldval = s->control;
+
+        s->control &= 0xfffffff8;
+        s->control |= value & 7;
+        if ((oldval ^ value) & SYSTICK_ENABLE) {
+            int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+            if (value & SYSTICK_ENABLE) {
+                if (s->tick) {
+                    s->tick += now;
+                    timer_mod(s->timer, s->tick);
+                } else {
+                    systick_reload(s, 1);
+                }
+            } else {
+                timer_del(s->timer);
+                s->tick -= now;
+                if (s->tick < 0) {
+                    s->tick = 0;
+                }
+            }
+        } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) {
+            /* This is a hack. Force the timer to be reloaded
+               when the reference clock is changed.  */
+            systick_reload(s, 1);
+        }
+        break;
+    }
+    case 0x4: /* SysTick Reload Value.  */
+        s->reload = value;
+        break;
+    case 0x8: /* SysTick Current Value.  Writes reload the timer.  */
+        systick_reload(s, 1);
+        s->control &= ~SYSTICK_COUNTFLAG;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SysTick: Bad write offset 0x%" HWADDR_PRIx "\n", addr);
+    }
+}
+
+static const MemoryRegionOps systick_ops = {
+    .read = systick_read,
+    .write = systick_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
+};
+
+static void systick_reset(DeviceState *dev)
+{
+    SysTickState *s = SYSTICK(dev);
+
+    s->control = 0;
+    s->reload = 0;
+    s->tick = 0;
+    timer_del(s->timer);
+}
+
+static void systick_instance_init(Object *obj)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    SysTickState *s = SYSTICK(obj);
+
+    memory_region_init_io(&s->iomem, obj, &systick_ops, s, "systick", 0xe0);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq);
+    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s);
+}
+
+static const VMStateDescription vmstate_systick = {
+    .name = "armv7m_systick",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(control, SysTickState),
+        VMSTATE_UINT32(reload, SysTickState),
+        VMSTATE_INT64(tick, SysTickState),
+        VMSTATE_TIMER_PTR(timer, SysTickState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void systick_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd = &vmstate_systick;
+    dc->reset = systick_reset;
+}
+
+static const TypeInfo armv7m_systick_info = {
+    .name = TYPE_SYSTICK,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_init = systick_instance_init,
+    .instance_size = sizeof(SysTickState),
+    .class_init = systick_class_init,
+};
+
+static void armv7m_systick_register_types(void)
+{
+    type_register_static(&armv7m_systick_info);
+}
+
+type_init(armv7m_systick_register_types)