hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 373 deletions

diff --git a/hw/ssd0323.c b/hw/ssd0323.c
deleted file mode 100644
index 5cf2f7058f..0000000000
--- a/hw/ssd0323.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * SSD0323 OLED controller with OSRAM Pictiva 128x64 display.
- *
- * Copyright (c) 2006-2007 CodeSourcery.
- * Written by Paul Brook
- *
- * This code is licensed under the GPL.
- */
-
-/* The controller can support a variety of different displays, but we only
-   implement one.  Most of the commends relating to brightness and geometry
-   setup are ignored. */
-#include "hw/ssi.h"
-#include "ui/console.h"
-
-//#define DEBUG_SSD0323 1
-
-#ifdef DEBUG_SSD0323
-#define DPRINTF(fmt, ...) \
-do { printf("ssd0323: " fmt , ## __VA_ARGS__); } while (0)
-#define BADF(fmt, ...) \
-do { \
-    fprintf(stderr, "ssd0323: error: " fmt , ## __VA_ARGS__); abort(); \
-} while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "ssd0323: error: " fmt , ## __VA_ARGS__);} while (0)
-#endif
-
-/* Scaling factor for pixels.  */
-#define MAGNIFY 4
-
-#define REMAP_SWAP_COLUMN 0x01
-#define REMAP_SWAP_NYBBLE 0x02
-#define REMAP_VERTICAL    0x04
-#define REMAP_SWAP_COM    0x10
-#define REMAP_SPLIT_COM   0x40
-
-enum ssd0323_mode
-{
-    SSD0323_CMD,
-    SSD0323_DATA
-};
-
-typedef struct {
-    SSISlave ssidev;
-    QemuConsole *con;
-
-    int cmd_len;
-    int cmd;
-    int cmd_data[8];
-    int row;
-    int row_start;
-    int row_end;
-    int col;
-    int col_start;
-    int col_end;
-    int redraw;
-    int remap;
-    enum ssd0323_mode mode;
-    uint8_t framebuffer[128 * 80 / 2];
-} ssd0323_state;
-
-static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data)
-{
-    ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev);
-
-    switch (s->mode) {
-    case SSD0323_DATA:
-        DPRINTF("data 0x%02x\n", data);
-        s->framebuffer[s->col + s->row * 64] = data;
-        if (s->remap & REMAP_VERTICAL) {
-            s->row++;
-            if (s->row > s->row_end) {
-                s->row = s->row_start;
-                s->col++;
-            }
-            if (s->col > s->col_end) {
-                s->col = s->col_start;
-            }
-        } else {
-            s->col++;
-            if (s->col > s->col_end) {
-                s->row++;
-                s->col = s->col_start;
-            }
-            if (s->row > s->row_end) {
-                s->row = s->row_start;
-            }
-        }
-        s->redraw = 1;
-        break;
-    case SSD0323_CMD:
-        DPRINTF("cmd 0x%02x\n", data);
-        if (s->cmd_len == 0) {
-            s->cmd = data;
-        } else {
-            s->cmd_data[s->cmd_len - 1] = data;
-        }
-        s->cmd_len++;
-        switch (s->cmd) {
-#define DATA(x) if (s->cmd_len <= (x)) return 0
-        case 0x15: /* Set column.  */
-            DATA(2);
-            s->col = s->col_start = s->cmd_data[0] % 64;
-            s->col_end = s->cmd_data[1] % 64;
-            break;
-        case 0x75: /* Set row.  */
-            DATA(2);
-            s->row = s->row_start = s->cmd_data[0] % 80;
-            s->row_end = s->cmd_data[1] % 80;
-            break;
-        case 0x81: /* Set contrast */
-            DATA(1);
-            break;
-        case 0x84: case 0x85: case 0x86: /* Max current.  */
-            DATA(0);
-            break;
-        case 0xa0: /* Set remapping.  */
-            /* FIXME: Implement this.  */
-            DATA(1);
-            s->remap = s->cmd_data[0];
-            break;
-        case 0xa1: /* Set display start line.  */
-        case 0xa2: /* Set display offset.  */
-            /* FIXME: Implement these.  */
-            DATA(1);
-            break;
-        case 0xa4: /* Normal mode.  */
-        case 0xa5: /* All on.  */
-        case 0xa6: /* All off.  */
-        case 0xa7: /* Inverse.  */
-            /* FIXME: Implement these.  */
-            DATA(0);
-            break;
-        case 0xa8: /* Set multiplex ratio.  */
-        case 0xad: /* Set DC-DC converter.  */
-            DATA(1);
-            /* Ignored.  Don't care.  */
-            break;
-        case 0xae: /* Display off.  */
-        case 0xaf: /* Display on.  */
-            DATA(0);
-            /* TODO: Implement power control.  */
-            break;
-        case 0xb1: /* Set phase length.  */
-        case 0xb2: /* Set row period.  */
-        case 0xb3: /* Set clock rate.  */
-        case 0xbc: /* Set precharge.  */
-        case 0xbe: /* Set VCOMH.  */
-        case 0xbf: /* Set segment low.  */
-            DATA(1);
-            /* Ignored.  Don't care.  */
-            break;
-        case 0xb8: /* Set grey scale table.  */
-            /* FIXME: Implement this.  */
-            DATA(8);
-            break;
-        case 0xe3: /* NOP.  */
-            DATA(0);
-            break;
-        case 0xff: /* Nasty hack because we don't handle chip selects
-                      properly.  */
-            break;
-        default:
-            BADF("Unknown command: 0x%x\n", data);
-        }
-        s->cmd_len = 0;
-        return 0;
-    }
-    return 0;
-}
-
-static void ssd0323_update_display(void *opaque)
-{
-    ssd0323_state *s = (ssd0323_state *)opaque;
-    DisplaySurface *surface = qemu_console_surface(s->con);
-    uint8_t *dest;
-    uint8_t *src;
-    int x;
-    int y;
-    int i;
-    int line;
-    char *colors[16];
-    char colortab[MAGNIFY * 64];
-    char *p;
-    int dest_width;
-
-    if (!s->redraw)
-        return;
-
-    switch (surface_bits_per_pixel(surface)) {
-    case 0:
-        return;
-    case 15:
-        dest_width = 2;
-        break;
-    case 16:
-        dest_width = 2;
-        break;
-    case 24:
-        dest_width = 3;
-        break;
-    case 32:
-        dest_width = 4;
-        break;
-    default:
-        BADF("Bad color depth\n");
-        return;
-    }
-    p = colortab;
-    for (i = 0; i < 16; i++) {
-        int n;
-        colors[i] = p;
-        switch (surface_bits_per_pixel(surface)) {
-        case 15:
-            n = i * 2 + (i >> 3);
-            p[0] = n | (n << 5);
-            p[1] = (n << 2) | (n >> 3);
-            break;
-        case 16:
-            n = i * 2 + (i >> 3);
-            p[0] = n | (n << 6) | ((n << 1) & 0x20);
-            p[1] = (n << 3) | (n >> 2);
-            break;
-        case 24:
-        case 32:
-            n = (i << 4) | i;
-            p[0] = p[1] = p[2] = n;
-            break;
-        default:
-            BADF("Bad color depth\n");
-            return;
-        }
-        p += dest_width;
-    }
-    /* TODO: Implement row/column remapping.  */
-    dest = surface_data(surface);
-    for (y = 0; y < 64; y++) {
-        line = y;
-        src = s->framebuffer + 64 * line;
-        for (x = 0; x < 64; x++) {
-            int val;
-            val = *src >> 4;
-            for (i = 0; i < MAGNIFY; i++) {
-                memcpy(dest, colors[val], dest_width);
-                dest += dest_width;
-            }
-            val = *src & 0xf;
-            for (i = 0; i < MAGNIFY; i++) {
-                memcpy(dest, colors[val], dest_width);
-                dest += dest_width;
-            }
-            src++;
-        }
-        for (i = 1; i < MAGNIFY; i++) {
-            memcpy(dest, dest - dest_width * MAGNIFY * 128,
-                   dest_width * 128 * MAGNIFY);
-            dest += dest_width * 128 * MAGNIFY;
-        }
-    }
-    s->redraw = 0;
-    dpy_gfx_update(s->con, 0, 0, 128 * MAGNIFY, 64 * MAGNIFY);
-}
-
-static void ssd0323_invalidate_display(void * opaque)
-{
-    ssd0323_state *s = (ssd0323_state *)opaque;
-    s->redraw = 1;
-}
-
-/* Command/data input.  */
-static void ssd0323_cd(void *opaque, int n, int level)
-{
-    ssd0323_state *s = (ssd0323_state *)opaque;
-    DPRINTF("%s mode\n", level ? "Data" : "Command");
-    s->mode = level ? SSD0323_DATA : SSD0323_CMD;
-}
-
-static void ssd0323_save(QEMUFile *f, void *opaque)
-{
-    SSISlave *ss = SSI_SLAVE(opaque);
-    ssd0323_state *s = (ssd0323_state *)opaque;
-    int i;
-
-    qemu_put_be32(f, s->cmd_len);
-    qemu_put_be32(f, s->cmd);
-    for (i = 0; i < 8; i++)
-        qemu_put_be32(f, s->cmd_data[i]);
-    qemu_put_be32(f, s->row);
-    qemu_put_be32(f, s->row_start);
-    qemu_put_be32(f, s->row_end);
-    qemu_put_be32(f, s->col);
-    qemu_put_be32(f, s->col_start);
-    qemu_put_be32(f, s->col_end);
-    qemu_put_be32(f, s->redraw);
-    qemu_put_be32(f, s->remap);
-    qemu_put_be32(f, s->mode);
-    qemu_put_buffer(f, s->framebuffer, sizeof(s->framebuffer));
-
-    qemu_put_be32(f, ss->cs);
-}
-
-static int ssd0323_load(QEMUFile *f, void *opaque, int version_id)
-{
-    SSISlave *ss = SSI_SLAVE(opaque);
-    ssd0323_state *s = (ssd0323_state *)opaque;
-    int i;
-
-    if (version_id != 1)
-        return -EINVAL;
-
-    s->cmd_len = qemu_get_be32(f);
-    s->cmd = qemu_get_be32(f);
-    for (i = 0; i < 8; i++)
-        s->cmd_data[i] = qemu_get_be32(f);
-    s->row = qemu_get_be32(f);
-    s->row_start = qemu_get_be32(f);
-    s->row_end = qemu_get_be32(f);
-    s->col = qemu_get_be32(f);
-    s->col_start = qemu_get_be32(f);
-    s->col_end = qemu_get_be32(f);
-    s->redraw = qemu_get_be32(f);
-    s->remap = qemu_get_be32(f);
-    s->mode = qemu_get_be32(f);
-    qemu_get_buffer(f, s->framebuffer, sizeof(s->framebuffer));
-
-    ss->cs = qemu_get_be32(f);
-
-    return 0;
-}
-
-static int ssd0323_init(SSISlave *dev)
-{
-    ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev);
-
-    s->col_end = 63;
-    s->row_end = 79;
-    s->con = graphic_console_init(ssd0323_update_display,
-                                  ssd0323_invalidate_display,
-                                  NULL, NULL, s);
-    qemu_console_resize(s->con, 128 * MAGNIFY, 64 * MAGNIFY);
-
-    qdev_init_gpio_in(&dev->qdev, ssd0323_cd, 1);
-
-    register_savevm(&dev->qdev, "ssd0323_oled", -1, 1,
-                    ssd0323_save, ssd0323_load, s);
-    return 0;
-}
-
-static void ssd0323_class_init(ObjectClass *klass, void *data)
-{
-    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
-    k->init = ssd0323_init;
-    k->transfer = ssd0323_transfer;
-    k->cs_polarity = SSI_CS_HIGH;
-}
-
-static const TypeInfo ssd0323_info = {
-    .name          = "ssd0323",
-    .parent        = TYPE_SSI_SLAVE,
-    .instance_size = sizeof(ssd0323_state),
-    .class_init    = ssd0323_class_init,
-};
-
-static void ssd03232_register_types(void)
-{
-    type_register_static(&ssd0323_info);
-}
-
-type_init(ssd03232_register_types)