ARMv7 support.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3572 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 267 insertions, 0 deletions

diff --git a/hw/ssd0323.c b/hw/ssd0323.c
new file mode 100644
index 0000000000..67361bce2e
--- /dev/null
+++ b/hw/ssd0323.c
@@ -0,0 +1,267 @@
+/*
+ * SSD0323 OLED controller with OSRAM Pictiva 128x64 display.
+ *
+ * Copyright (c) 2006-2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the GPL.
+ */
+
+/* The controller can support a variety of different displays, but we only
+   implement one.  Most of the commends relating to brightness and geometry
+   setup are ignored. */
+#include "vl.h"
+
+//#define DEBUG_SSD0323 1
+
+#ifdef DEBUG_SSD0323
+#define DPRINTF(fmt, args...) \
+do { printf("ssd0323: " fmt , ##args); } while (0)
+#define BADF(fmt, args...) \
+do { fprintf(stderr, "ssd0323: error: " fmt , ##args); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, args...) do {} while(0)
+#define BADF(fmt, args...) \
+do { fprintf(stderr, "ssd0323: error: " fmt , ##args);} while (0)
+#endif
+
+/* Scaling factor for pixels.  */
+#define MAGNIFY 4
+
+enum ssd0323_mode
+{
+    SSD0323_CMD,
+    SSD0323_DATA
+};
+
+typedef struct {
+    DisplayState *ds;
+
+    int cmd_len;
+    int cmd;
+    int cmd_data[8];
+    int row;
+    int row_start;
+    int row_end;
+    int col;
+    int col_start;
+    int col_end;
+    int redraw;
+    enum ssd0323_mode mode;
+    uint8_t framebuffer[128 * 80 / 2];
+} ssd0323_state;
+
+int ssd0323_xfer_ssi(void *opaque, int data)
+{
+    ssd0323_state *s = (ssd0323_state *)opaque;
+    switch (s->mode) {
+    case SSD0323_DATA:
+        DPRINTF("data 0x%02x\n", data);
+        s->framebuffer[s->col + s->row * 64] = data;
+        s->col++;
+        if (s->col > s->col_end) {
+            s->row++;
+            s->col = s->col_start;
+        }
+        if (s->row > s->row_end) {
+            s->row = s->row_start;
+        }
+        s->redraw = 1;
+        break;
+    case SSD0323_CMD:
+        DPRINTF("cmd 0x%02x\n", data);
+        if (s->cmd_len == 0) {
+            s->cmd = data;
+        } else {
+            s->cmd_data[s->cmd_len - 1] = data;
+        }
+        s->cmd_len++;
+        switch (s->cmd) {
+#define DATA(x) if (s->cmd_len <= (x)) return 0
+        case 0x15: /* Set column.  */
+            DATA(2);
+            s->col_start = s->cmd_data[0] % 64;
+            s->col_end = s->cmd_data[1] % 64;
+            break;
+        case 0x75: /* Set row.  */
+            DATA(2);
+            s->row_start = s->cmd_data[0] % 80;
+            s->row_end = s->cmd_data[1] % 80;
+            break;
+        case 0x81: /* Set contrast */
+            DATA(1);
+            break;
+        case 0x84: case 0x85: case 0x86: /* Max current.  */
+            DATA(0);
+            break;
+        case 0xa0: /* Set remapping.  */
+            /* FIXME: Implement this.  */
+            DATA(1);
+            break;
+        case 0xa1: /* Set display start line.  */
+        case 0xa2: /* Set display offset.  */
+            /* FIXME: Implement these.  */
+            DATA(1);
+            break;
+        case 0xa4: /* Normal mode.  */
+        case 0xa5: /* All on.  */
+        case 0xa6: /* All off.  */
+        case 0xa7: /* Inverse.  */
+            /* FIXME: Implement these.  */
+            DATA(0);
+            break;
+        case 0xa8: /* Set multiplex ratio.  */
+        case 0xad: /* Set DC-DC converter.  */
+            DATA(1);
+            /* Ignored.  Don't care.  */
+            break;
+        case 0xae: /* Display off.  */
+        case 0xaf: /* Display on.  */
+            DATA(0);
+            /* TODO: Implement power control.  */
+            break;
+        case 0xb1: /* Set phase length.  */
+        case 0xb2: /* Set row period.  */
+        case 0xb3: /* Set clock rate.  */
+        case 0xbc: /* Set precharge.  */
+        case 0xbe: /* Set VCOMH.  */
+        case 0xbf: /* Set segment low.  */
+            DATA(1);
+            /* Ignored.  Don't care.  */
+            break;
+        case 0xb8: /* Set grey scale table.  */
+            /* FIXME: Implement this.  */
+            DATA(8);
+            break;
+        case 0xe3: /* NOP.  */
+            DATA(0);
+            break;
+        default:
+            BADF("Unknown command: 0x%x\n", data);
+        }
+        s->cmd_len = 0;
+        return 0;
+    }
+    return 0;
+}
+
+static void ssd0323_update_display(void *opaque)
+{
+    ssd0323_state *s = (ssd0323_state *)opaque;
+    uint8_t *dest;
+    uint8_t *src;
+    int x;
+    int y;
+    int i;
+    int line;
+    char *colors[16];
+    char colortab[MAGNIFY * 64];
+    char *p;
+    int dest_width;
+
+    if (s->redraw) {
+        switch (s->ds->depth) {
+        case 0:
+            return;
+        case 15:
+            dest_width = 2;
+            break;
+        case 16:
+            dest_width = 2;
+            break;
+        case 24:
+            dest_width = 3;
+            break;
+        case 32:
+            dest_width = 4;
+            break;
+        default:
+            BADF("Bad color depth\n");
+            return;
+        }
+        p = colortab;
+        for (i = 0; i < 16; i++) {
+            int n;
+            colors[i] = p;
+            switch (s->ds->depth) {
+            case 15:
+                n = i * 2 + (i >> 3);
+                p[0] = n | (n << 5);
+                p[1] = (n << 2) | (n >> 3);
+                break;
+            case 16:
+                n = i * 2 + (i >> 3);
+                p[0] = n | (n << 6) | ((n << 1) & 0x20);
+                p[1] = (n << 3) | (n >> 2);
+                break;
+            case 24:
+            case 32:
+                n = (i << 4) | i;
+                p[0] = p[1] = p[2] = n;
+                break;
+            default:
+                BADF("Bad color depth\n");
+                return;
+            }
+            p += dest_width;
+        }
+        dest = s->ds->data;
+        for (y = 0; y < 64; y++) {
+            line = y;
+            src = s->framebuffer + 64 * line;
+            for (x = 0; x < 64; x++) {
+                int val;
+                val = *src >> 4;
+                for (i = 0; i < MAGNIFY; i++) {
+                    memcpy(dest, colors[val], dest_width);
+                    dest += dest_width;
+                }
+                val = *src & 0xf;
+                for (i = 0; i < MAGNIFY; i++) {
+                    memcpy(dest, colors[val], dest_width);
+                    dest += dest_width;
+                }
+                src++;
+            }
+            for (i = 1; i < MAGNIFY; i++) {
+                memcpy(dest, dest - dest_width * MAGNIFY * 128,
+                       dest_width * 128 * MAGNIFY);
+                dest += dest_width * 128 * MAGNIFY;
+            }
+        }
+    }
+    dpy_update(s->ds, 0, 0, 128 * MAGNIFY, 64 * MAGNIFY);
+}
+
+static void ssd0323_invalidate_display(void * opaque)
+{
+    ssd0323_state *s = (ssd0323_state *)opaque;
+    s->redraw = 1;
+}
+
+/* Command/data input.  */
+static void ssd0323_cd(void *opaque, int n, int level)
+{
+    ssd0323_state *s = (ssd0323_state *)opaque;
+    DPRINTF("%s mode\n", level ? "Data" : "Command");
+    s->mode = level ? SSD0323_DATA : SSD0323_CMD;
+}
+
+void *ssd0323_init(DisplayState *ds, qemu_irq *cmd_p)
+{
+    ssd0323_state *s;
+    qemu_irq *cmd;
+
+    s = (ssd0323_state *)qemu_mallocz(sizeof(ssd0323_state));
+    s->ds = ds;
+    graphic_console_init(ds, ssd0323_update_display, ssd0323_invalidate_display,
+                         NULL, s);
+    dpy_resize(s->ds, 128 * MAGNIFY, 64 * MAGNIFY);
+    s->col_end = 63;
+    s->row_end = 79;
+
+    cmd = qemu_allocate_irqs(ssd0323_cd, s, 1);
+    *cmd_p = *cmd;
+
+    return s;
+}