pseries: Use the same interrupt swizzling for host bridges as p2p bridges

Currently the pseries PCI code uses a somewhat strange scheme of PCI irq
allocation - one per slot up to a maximum that's greater than the usual 4.
This scheme more or less worked, because we were able to tell the guest the
irq mapping in the device tree, however it's a bit odd and may break
assumptions in the future.  Worse, the array used to construct the dev
tree interrupt map was mis-sized, we got away with it only because it
happened that our SPAPR_PCI_NUM_LSI value was greater than 7.

This patch changes the pseries PCI code to use the same interrupt swizzling
scheme as is standardized for PCI to PCI bridges.  This makes for better
consistency, deals better with any devices which use multiple interrupt
pins and will make life easier in the future when we add passthrough of
what may be either a host bridge or a PCI to PCI bridge.  This won't break
existing guests, because they don't assume a particular mapping scheme for
host bridges, but just follow what we tell them in the device tree (also
updated to match, of course).  This patch also fixes the allocation of the
irq map.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

1 files changed, 28 insertions, 21 deletions

diff --git a/hw/spapr_pci.c b/hw/spapr_pci.c
index a564c007b4..25b400aa47 100644
--- a/hw/spapr_pci.c
+++ b/hw/spapr_pci.c
@@ -198,16 +198,20 @@ static void rtas_write_pci_config(sPAPREnvironment *spapr,
     finish_write_pci_config(spapr, 0, addr, size, val, rets);
 }
 
+static int pci_spapr_swizzle(int slot, int pin)
+{
+    return (slot + pin) % PCI_NUM_PINS;
+}
+
 static int pci_spapr_map_irq(PCIDevice *pci_dev, int irq_num)
 {
     /*
      * Here we need to convert pci_dev + irq_num to some unique value
-     * which is less than number of IRQs on the specific bus (now it
-     * is 16).  At the moment irq_num == device_id (number of the
-     * slot?)
-     * FIXME: we should swizzle in fn and irq_num
+     * which is less than number of IRQs on the specific bus (4).  We
+     * use standard PCI swizzling, that is (slot number + pin number)
+     * % 4.
      */
-    return (pci_dev->devfn >> 3) % SPAPR_PCI_NUM_LSI;
+    return pci_spapr_swizzle(PCI_SLOT(pci_dev->devfn), irq_num);
 }
 
 static void pci_spapr_set_irq(void *opaque, int irq_num, int level)
@@ -304,13 +308,13 @@ static int spapr_phb_init(SysBusDevice *s)
                            phb->busname ? phb->busname : phb->dtbusname,
                            pci_spapr_set_irq, pci_spapr_map_irq, phb,
                            &phb->memspace, &phb->iospace,
-                           PCI_DEVFN(0, 0), SPAPR_PCI_NUM_LSI);
+                           PCI_DEVFN(0, 0), PCI_NUM_PINS);
     phb->host_state.bus = bus;
 
     QLIST_INSERT_HEAD(&spapr->phbs, phb, list);
 
     /* Initialize the LSI table */
-    for (i = 0; i < SPAPR_PCI_NUM_LSI; i++) {
+    for (i = 0; i < PCI_NUM_PINS; i++) {
         qemu_irq qirq;
         uint32_t num;
 
@@ -392,8 +396,7 @@ int spapr_populate_pci_devices(sPAPRPHBState *phb,
                                uint32_t xics_phandle,
                                void *fdt)
 {
-    PCIBus *bus = phb->host_state.bus;
-    int bus_off, i;
+    int bus_off, i, j;
     char nodename[256];
     uint32_t bus_range[] = { cpu_to_be32(0), cpu_to_be32(0xff) };
     struct {
@@ -415,8 +418,8 @@ int spapr_populate_pci_devices(sPAPRPHBState *phb,
     };
     uint64_t bus_reg[] = { cpu_to_be64(phb->buid), 0 };
     uint32_t interrupt_map_mask[] = {
-        cpu_to_be32(b_ddddd(-1)|b_fff(0)), 0x0, 0x0, 0x0};
-    uint32_t interrupt_map[bus->nirq][7];
+        cpu_to_be32(b_ddddd(-1)|b_fff(0)), 0x0, 0x0, cpu_to_be32(-1)};
+    uint32_t interrupt_map[PCI_SLOT_MAX * PCI_NUM_PINS][7];
 
     /* Start populating the FDT */
     sprintf(nodename, "pci@%" PRIx64, phb->buid);
@@ -450,19 +453,23 @@ int spapr_populate_pci_devices(sPAPRPHBState *phb,
      */
     _FDT(fdt_setprop(fdt, bus_off, "interrupt-map-mask",
                      &interrupt_map_mask, sizeof(interrupt_map_mask)));
-    for (i = 0; i < 7; i++) {
-        uint32_t *irqmap = interrupt_map[i];
-        irqmap[0] = cpu_to_be32(b_ddddd(i)|b_fff(0));
-        irqmap[1] = 0;
-        irqmap[2] = 0;
-        irqmap[3] = 0;
-        irqmap[4] = cpu_to_be32(xics_phandle);
-        irqmap[5] = cpu_to_be32(phb->lsi_table[i % SPAPR_PCI_NUM_LSI].dt_irq);
-        irqmap[6] = cpu_to_be32(0x8);
+    for (i = 0; i < PCI_SLOT_MAX; i++) {
+        for (j = 0; j < PCI_NUM_PINS; j++) {
+            uint32_t *irqmap = interrupt_map[i*PCI_NUM_PINS + j];
+            int lsi_num = pci_spapr_swizzle(i, j);
+
+            irqmap[0] = cpu_to_be32(b_ddddd(i)|b_fff(0));
+            irqmap[1] = 0;
+            irqmap[2] = 0;
+            irqmap[3] = cpu_to_be32(j+1);
+            irqmap[4] = cpu_to_be32(xics_phandle);
+            irqmap[5] = cpu_to_be32(phb->lsi_table[lsi_num].dt_irq);
+            irqmap[6] = cpu_to_be32(0x8);
+        }
     }
     /* Write interrupt map */
     _FDT(fdt_setprop(fdt, bus_off, "interrupt-map", &interrupt_map,
-                     7 * sizeof(interrupt_map[0])));
+                     sizeof(interrupt_map)));
 
     return 0;
 }