hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 515 insertions, 0 deletions

diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
new file mode 100644
index 0000000000..2527296776
--- /dev/null
+++ b/hw/sd/pl181.c
@@ -0,0 +1,515 @@
+/*
+ * Arm PrimeCell PL181 MultiMedia Card Interface
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL.
+ */
+
+#include "sysemu/blockdev.h"
+#include "hw/sysbus.h"
+#include "hw/sd.h"
+
+//#define DEBUG_PL181 1
+
+#ifdef DEBUG_PL181
+#define DPRINTF(fmt, ...) \
+do { printf("pl181: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#endif
+
+#define PL181_FIFO_LEN 16
+
+typedef struct {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    SDState *card;
+    uint32_t clock;
+    uint32_t power;
+    uint32_t cmdarg;
+    uint32_t cmd;
+    uint32_t datatimer;
+    uint32_t datalength;
+    uint32_t respcmd;
+    uint32_t response[4];
+    uint32_t datactrl;
+    uint32_t datacnt;
+    uint32_t status;
+    uint32_t mask[2];
+    int32_t fifo_pos;
+    int32_t fifo_len;
+    /* The linux 2.6.21 driver is buggy, and misbehaves if new data arrives
+       while it is reading the FIFO.  We hack around this be defering
+       subsequent transfers until after the driver polls the status word.
+       http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4446/1
+     */
+    int32_t linux_hack;
+    uint32_t fifo[PL181_FIFO_LEN];
+    qemu_irq irq[2];
+    /* GPIO outputs for 'card is readonly' and 'card inserted' */
+    qemu_irq cardstatus[2];
+} pl181_state;
+
+static const VMStateDescription vmstate_pl181 = {
+    .name = "pl181",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(clock, pl181_state),
+        VMSTATE_UINT32(power, pl181_state),
+        VMSTATE_UINT32(cmdarg, pl181_state),
+        VMSTATE_UINT32(cmd, pl181_state),
+        VMSTATE_UINT32(datatimer, pl181_state),
+        VMSTATE_UINT32(datalength, pl181_state),
+        VMSTATE_UINT32(respcmd, pl181_state),
+        VMSTATE_UINT32_ARRAY(response, pl181_state, 4),
+        VMSTATE_UINT32(datactrl, pl181_state),
+        VMSTATE_UINT32(datacnt, pl181_state),
+        VMSTATE_UINT32(status, pl181_state),
+        VMSTATE_UINT32_ARRAY(mask, pl181_state, 2),
+        VMSTATE_INT32(fifo_pos, pl181_state),
+        VMSTATE_INT32(fifo_len, pl181_state),
+        VMSTATE_INT32(linux_hack, pl181_state),
+        VMSTATE_UINT32_ARRAY(fifo, pl181_state, PL181_FIFO_LEN),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+#define PL181_CMD_INDEX     0x3f
+#define PL181_CMD_RESPONSE  (1 << 6)
+#define PL181_CMD_LONGRESP  (1 << 7)
+#define PL181_CMD_INTERRUPT (1 << 8)
+#define PL181_CMD_PENDING   (1 << 9)
+#define PL181_CMD_ENABLE    (1 << 10)
+
+#define PL181_DATA_ENABLE             (1 << 0)
+#define PL181_DATA_DIRECTION          (1 << 1)
+#define PL181_DATA_MODE               (1 << 2)
+#define PL181_DATA_DMAENABLE          (1 << 3)
+
+#define PL181_STATUS_CMDCRCFAIL       (1 << 0)
+#define PL181_STATUS_DATACRCFAIL      (1 << 1)
+#define PL181_STATUS_CMDTIMEOUT       (1 << 2)
+#define PL181_STATUS_DATATIMEOUT      (1 << 3)
+#define PL181_STATUS_TXUNDERRUN       (1 << 4)
+#define PL181_STATUS_RXOVERRUN        (1 << 5)
+#define PL181_STATUS_CMDRESPEND       (1 << 6)
+#define PL181_STATUS_CMDSENT          (1 << 7)
+#define PL181_STATUS_DATAEND          (1 << 8)
+#define PL181_STATUS_DATABLOCKEND     (1 << 10)
+#define PL181_STATUS_CMDACTIVE        (1 << 11)
+#define PL181_STATUS_TXACTIVE         (1 << 12)
+#define PL181_STATUS_RXACTIVE         (1 << 13)
+#define PL181_STATUS_TXFIFOHALFEMPTY  (1 << 14)
+#define PL181_STATUS_RXFIFOHALFFULL   (1 << 15)
+#define PL181_STATUS_TXFIFOFULL       (1 << 16)
+#define PL181_STATUS_RXFIFOFULL       (1 << 17)
+#define PL181_STATUS_TXFIFOEMPTY      (1 << 18)
+#define PL181_STATUS_RXFIFOEMPTY      (1 << 19)
+#define PL181_STATUS_TXDATAAVLBL      (1 << 20)
+#define PL181_STATUS_RXDATAAVLBL      (1 << 21)
+
+#define PL181_STATUS_TX_FIFO (PL181_STATUS_TXACTIVE \
+                             |PL181_STATUS_TXFIFOHALFEMPTY \
+                             |PL181_STATUS_TXFIFOFULL \
+                             |PL181_STATUS_TXFIFOEMPTY \
+                             |PL181_STATUS_TXDATAAVLBL)
+#define PL181_STATUS_RX_FIFO (PL181_STATUS_RXACTIVE \
+                             |PL181_STATUS_RXFIFOHALFFULL \
+                             |PL181_STATUS_RXFIFOFULL \
+                             |PL181_STATUS_RXFIFOEMPTY \
+                             |PL181_STATUS_RXDATAAVLBL)
+
+static const unsigned char pl181_id[] =
+{ 0x81, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+
+static void pl181_update(pl181_state *s)
+{
+    int i;
+    for (i = 0; i < 2; i++) {
+        qemu_set_irq(s->irq[i], (s->status & s->mask[i]) != 0);
+    }
+}
+
+static void pl181_fifo_push(pl181_state *s, uint32_t value)
+{
+    int n;
+
+    if (s->fifo_len == PL181_FIFO_LEN) {
+        fprintf(stderr, "pl181: FIFO overflow\n");
+        return;
+    }
+    n = (s->fifo_pos + s->fifo_len) & (PL181_FIFO_LEN - 1);
+    s->fifo_len++;
+    s->fifo[n] = value;
+    DPRINTF("FIFO push %08x\n", (int)value);
+}
+
+static uint32_t pl181_fifo_pop(pl181_state *s)
+{
+    uint32_t value;
+
+    if (s->fifo_len == 0) {
+        fprintf(stderr, "pl181: FIFO underflow\n");
+        return 0;
+    }
+    value = s->fifo[s->fifo_pos];
+    s->fifo_len--;
+    s->fifo_pos = (s->fifo_pos + 1) & (PL181_FIFO_LEN - 1);
+    DPRINTF("FIFO pop %08x\n", (int)value);
+    return value;
+}
+
+static void pl181_send_command(pl181_state *s)
+{
+    SDRequest request;
+    uint8_t response[16];
+    int rlen;
+
+    request.cmd = s->cmd & PL181_CMD_INDEX;
+    request.arg = s->cmdarg;
+    DPRINTF("Command %d %08x\n", request.cmd, request.arg);
+    rlen = sd_do_command(s->card, &request, response);
+    if (rlen < 0)
+        goto error;
+    if (s->cmd & PL181_CMD_RESPONSE) {
+#define RWORD(n) ((response[n] << 24) | (response[n + 1] << 16) \
+                  | (response[n + 2] << 8) | response[n + 3])
+        if (rlen == 0 || (rlen == 4 && (s->cmd & PL181_CMD_LONGRESP)))
+            goto error;
+        if (rlen != 4 && rlen != 16)
+            goto error;
+        s->response[0] = RWORD(0);
+        if (rlen == 4) {
+            s->response[1] = s->response[2] = s->response[3] = 0;
+        } else {
+            s->response[1] = RWORD(4);
+            s->response[2] = RWORD(8);
+            s->response[3] = RWORD(12) & ~1;
+        }
+        DPRINTF("Response received\n");
+        s->status |= PL181_STATUS_CMDRESPEND;
+#undef RWORD
+    } else {
+        DPRINTF("Command sent\n");
+        s->status |= PL181_STATUS_CMDSENT;
+    }
+    return;
+
+error:
+    DPRINTF("Timeout\n");
+    s->status |= PL181_STATUS_CMDTIMEOUT;
+}
+
+/* Transfer data between the card and the FIFO.  This is complicated by
+   the FIFO holding 32-bit words and the card taking data in single byte
+   chunks.  FIFO bytes are transferred in little-endian order.  */
+
+static void pl181_fifo_run(pl181_state *s)
+{
+    uint32_t bits;
+    uint32_t value = 0;
+    int n;
+    int is_read;
+
+    is_read = (s->datactrl & PL181_DATA_DIRECTION) != 0;
+    if (s->datacnt != 0 && (!is_read || sd_data_ready(s->card))
+            && !s->linux_hack) {
+        if (is_read) {
+            n = 0;
+            while (s->datacnt && s->fifo_len < PL181_FIFO_LEN) {
+                value |= (uint32_t)sd_read_data(s->card) << (n * 8);
+                s->datacnt--;
+                n++;
+                if (n == 4) {
+                    pl181_fifo_push(s, value);
+                    n = 0;
+                    value = 0;
+                }
+            }
+            if (n != 0) {
+                pl181_fifo_push(s, value);
+            }
+        } else { /* write */
+            n = 0;
+            while (s->datacnt > 0 && (s->fifo_len > 0 || n > 0)) {
+                if (n == 0) {
+                    value = pl181_fifo_pop(s);
+                    n = 4;
+                }
+                n--;
+                s->datacnt--;
+                sd_write_data(s->card, value & 0xff);
+                value >>= 8;
+            }
+        }
+    }
+    s->status &= ~(PL181_STATUS_RX_FIFO | PL181_STATUS_TX_FIFO);
+    if (s->datacnt == 0) {
+        s->status |= PL181_STATUS_DATAEND;
+        /* HACK: */
+        s->status |= PL181_STATUS_DATABLOCKEND;
+        DPRINTF("Transfer Complete\n");
+    }
+    if (s->datacnt == 0 && s->fifo_len == 0) {
+        s->datactrl &= ~PL181_DATA_ENABLE;
+        DPRINTF("Data engine idle\n");
+    } else {
+        /* Update FIFO bits.  */
+        bits = PL181_STATUS_TXACTIVE | PL181_STATUS_RXACTIVE;
+        if (s->fifo_len == 0) {
+            bits |= PL181_STATUS_TXFIFOEMPTY;
+            bits |= PL181_STATUS_RXFIFOEMPTY;
+        } else {
+            bits |= PL181_STATUS_TXDATAAVLBL;
+            bits |= PL181_STATUS_RXDATAAVLBL;
+        }
+        if (s->fifo_len == 16) {
+            bits |= PL181_STATUS_TXFIFOFULL;
+            bits |= PL181_STATUS_RXFIFOFULL;
+        }
+        if (s->fifo_len <= 8) {
+            bits |= PL181_STATUS_TXFIFOHALFEMPTY;
+        }
+        if (s->fifo_len >= 8) {
+            bits |= PL181_STATUS_RXFIFOHALFFULL;
+        }
+        if (s->datactrl & PL181_DATA_DIRECTION) {
+            bits &= PL181_STATUS_RX_FIFO;
+        } else {
+            bits &= PL181_STATUS_TX_FIFO;
+        }
+        s->status |= bits;
+    }
+}
+
+static uint64_t pl181_read(void *opaque, hwaddr offset,
+                           unsigned size)
+{
+    pl181_state *s = (pl181_state *)opaque;
+    uint32_t tmp;
+
+    if (offset >= 0xfe0 && offset < 0x1000) {
+        return pl181_id[(offset - 0xfe0) >> 2];
+    }
+    switch (offset) {
+    case 0x00: /* Power */
+        return s->power;
+    case 0x04: /* Clock */
+        return s->clock;
+    case 0x08: /* Argument */
+        return s->cmdarg;
+    case 0x0c: /* Command */
+        return s->cmd;
+    case 0x10: /* RespCmd */
+        return s->respcmd;
+    case 0x14: /* Response0 */
+        return s->response[0];
+    case 0x18: /* Response1 */
+        return s->response[1];
+    case 0x1c: /* Response2 */
+        return s->response[2];
+    case 0x20: /* Response3 */
+        return s->response[3];
+    case 0x24: /* DataTimer */
+        return s->datatimer;
+    case 0x28: /* DataLength */
+        return s->datalength;
+    case 0x2c: /* DataCtrl */
+        return s->datactrl;
+    case 0x30: /* DataCnt */
+        return s->datacnt;
+    case 0x34: /* Status */
+        tmp = s->status;
+        if (s->linux_hack) {
+            s->linux_hack = 0;
+            pl181_fifo_run(s);
+            pl181_update(s);
+        }
+        return tmp;
+    case 0x3c: /* Mask0 */
+        return s->mask[0];
+    case 0x40: /* Mask1 */
+        return s->mask[1];
+    case 0x48: /* FifoCnt */
+        /* The documentation is somewhat vague about exactly what FifoCnt
+           does.  On real hardware it appears to be when decrememnted
+           when a word is transferred between the FIFO and the serial
+           data engine.  DataCnt is decremented after each byte is
+           transferred between the serial engine and the card.
+           We don't emulate this level of detail, so both can be the same.  */
+        tmp = (s->datacnt + 3) >> 2;
+        if (s->linux_hack) {
+            s->linux_hack = 0;
+            pl181_fifo_run(s);
+            pl181_update(s);
+        }
+        return tmp;
+    case 0x80: case 0x84: case 0x88: case 0x8c: /* FifoData */
+    case 0x90: case 0x94: case 0x98: case 0x9c:
+    case 0xa0: case 0xa4: case 0xa8: case 0xac:
+    case 0xb0: case 0xb4: case 0xb8: case 0xbc:
+        if (s->fifo_len == 0) {
+            qemu_log_mask(LOG_GUEST_ERROR, "pl181: Unexpected FIFO read\n");
+            return 0;
+        } else {
+            uint32_t value;
+            value = pl181_fifo_pop(s);
+            s->linux_hack = 1;
+            pl181_fifo_run(s);
+            pl181_update(s);
+            return value;
+        }
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl181_read: Bad offset %x\n", (int)offset);
+        return 0;
+    }
+}
+
+static void pl181_write(void *opaque, hwaddr offset,
+                        uint64_t value, unsigned size)
+{
+    pl181_state *s = (pl181_state *)opaque;
+
+    switch (offset) {
+    case 0x00: /* Power */
+        s->power = value & 0xff;
+        break;
+    case 0x04: /* Clock */
+        s->clock = value & 0xff;
+        break;
+    case 0x08: /* Argument */
+        s->cmdarg = value;
+        break;
+    case 0x0c: /* Command */
+        s->cmd = value;
+        if (s->cmd & PL181_CMD_ENABLE) {
+            if (s->cmd & PL181_CMD_INTERRUPT) {
+                qemu_log_mask(LOG_UNIMP,
+                              "pl181: Interrupt mode not implemented\n");
+            } if (s->cmd & PL181_CMD_PENDING) {
+                qemu_log_mask(LOG_UNIMP,
+                              "pl181: Pending commands not implemented\n");
+            } else {
+                pl181_send_command(s);
+                pl181_fifo_run(s);
+            }
+            /* The command has completed one way or the other.  */
+            s->cmd &= ~PL181_CMD_ENABLE;
+        }
+        break;
+    case 0x24: /* DataTimer */
+        s->datatimer = value;
+        break;
+    case 0x28: /* DataLength */
+        s->datalength = value & 0xffff;
+        break;
+    case 0x2c: /* DataCtrl */
+        s->datactrl = value & 0xff;
+        if (value & PL181_DATA_ENABLE) {
+            s->datacnt = s->datalength;
+            pl181_fifo_run(s);
+        }
+        break;
+    case 0x38: /* Clear */
+        s->status &= ~(value & 0x7ff);
+        break;
+    case 0x3c: /* Mask0 */
+        s->mask[0] = value;
+        break;
+    case 0x40: /* Mask1 */
+        s->mask[1] = value;
+        break;
+    case 0x80: case 0x84: case 0x88: case 0x8c: /* FifoData */
+    case 0x90: case 0x94: case 0x98: case 0x9c:
+    case 0xa0: case 0xa4: case 0xa8: case 0xac:
+    case 0xb0: case 0xb4: case 0xb8: case 0xbc:
+        if (s->datacnt == 0) {
+            qemu_log_mask(LOG_GUEST_ERROR, "pl181: Unexpected FIFO write\n");
+        } else {
+            pl181_fifo_push(s, value);
+            pl181_fifo_run(s);
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl181_write: Bad offset %x\n", (int)offset);
+    }
+    pl181_update(s);
+}
+
+static const MemoryRegionOps pl181_ops = {
+    .read = pl181_read,
+    .write = pl181_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void pl181_reset(DeviceState *d)
+{
+    pl181_state *s = DO_UPCAST(pl181_state, busdev.qdev, d);
+
+    s->power = 0;
+    s->cmdarg = 0;
+    s->cmd = 0;
+    s->datatimer = 0;
+    s->datalength = 0;
+    s->respcmd = 0;
+    s->response[0] = 0;
+    s->response[1] = 0;
+    s->response[2] = 0;
+    s->response[3] = 0;
+    s->datatimer = 0;
+    s->datalength = 0;
+    s->datactrl = 0;
+    s->datacnt = 0;
+    s->status = 0;
+    s->linux_hack = 0;
+    s->mask[0] = 0;
+    s->mask[1] = 0;
+
+    /* We can assume our GPIO outputs have been wired up now */
+    sd_set_cb(s->card, s->cardstatus[0], s->cardstatus[1]);
+}
+
+static int pl181_init(SysBusDevice *dev)
+{
+    pl181_state *s = FROM_SYSBUS(pl181_state, dev);
+    DriveInfo *dinfo;
+
+    memory_region_init_io(&s->iomem, &pl181_ops, s, "pl181", 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    sysbus_init_irq(dev, &s->irq[0]);
+    sysbus_init_irq(dev, &s->irq[1]);
+    qdev_init_gpio_out(&s->busdev.qdev, s->cardstatus, 2);
+    dinfo = drive_get_next(IF_SD);
+    s->card = sd_init(dinfo ? dinfo->bdrv : NULL, 0);
+    return 0;
+}
+
+static void pl181_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+    DeviceClass *k = DEVICE_CLASS(klass);
+
+    sdc->init = pl181_init;
+    k->vmsd = &vmstate_pl181;
+    k->reset = pl181_reset;
+    k->no_user = 1;
+}
+
+static const TypeInfo pl181_info = {
+    .name          = "pl181",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl181_state),
+    .class_init    = pl181_class_init,
+};
+
+static void pl181_register_types(void)
+{
+    type_register_static(&pl181_info);
+}
+
+type_init(pl181_register_types)