bcm2835_sdhost: add bcm2835 sdhost controller

This adds the BCM2835 SDHost controller from Arasan.

Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 429 insertions, 0 deletions

diff --git a/hw/sd/bcm2835_sdhost.c b/hw/sd/bcm2835_sdhost.c
new file mode 100644
index 0000000000..f7f4e656df
--- /dev/null
+++ b/hw/sd/bcm2835_sdhost.c
@@ -0,0 +1,429 @@
+/*
+ * Raspberry Pi (BCM2835) SD Host Controller
+ *
+ * Copyright (c) 2017 Antfield SAS
+ *
+ * Authors:
+ *  Clement Deschamps <clement.deschamps@antfield.fr>
+ *  Luc Michel <luc.michel@antfield.fr>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "sysemu/blockdev.h"
+#include "hw/sd/bcm2835_sdhost.h"
+
+#define TYPE_BCM2835_SDHOST_BUS "bcm2835-sdhost-bus"
+#define BCM2835_SDHOST_BUS(obj) \
+    OBJECT_CHECK(SDBus, (obj), TYPE_BCM2835_SDHOST_BUS)
+
+#define SDCMD  0x00 /* Command to SD card              - 16 R/W */
+#define SDARG  0x04 /* Argument to SD card             - 32 R/W */
+#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
+#define SDCDIV 0x0c /* Start value for clock divider   - 11 R/W */
+#define SDRSP0 0x10 /* SD card rsp (31:0)         - 32 R   */
+#define SDRSP1 0x14 /* SD card rsp (63:32)        - 32 R   */
+#define SDRSP2 0x18 /* SD card rsp (95:64)        - 32 R   */
+#define SDRSP3 0x1c /* SD card rsp (127:96)       - 32 R   */
+#define SDHSTS 0x20 /* SD host status                  - 11 R   */
+#define SDVDD  0x30 /* SD card power control           -  1 R/W */
+#define SDEDM  0x34 /* Emergency Debug Mode            - 13 R/W */
+#define SDHCFG 0x38 /* Host configuration              -  2 R/W */
+#define SDHBCT 0x3c /* Host byte count (debug)         - 32 R/W */
+#define SDDATA 0x40 /* Data to/from SD card            - 32 R/W */
+#define SDHBLC 0x50 /* Host block count (SDIO/SDHC)    -  9 R/W */
+
+#define SDCMD_NEW_FLAG                  0x8000
+#define SDCMD_FAIL_FLAG                 0x4000
+#define SDCMD_BUSYWAIT                  0x800
+#define SDCMD_NO_RESPONSE               0x400
+#define SDCMD_LONG_RESPONSE             0x200
+#define SDCMD_WRITE_CMD                 0x80
+#define SDCMD_READ_CMD                  0x40
+#define SDCMD_CMD_MASK                  0x3f
+
+#define SDCDIV_MAX_CDIV                 0x7ff
+
+#define SDHSTS_BUSY_IRPT                0x400
+#define SDHSTS_BLOCK_IRPT               0x200
+#define SDHSTS_SDIO_IRPT                0x100
+#define SDHSTS_REW_TIME_OUT             0x80
+#define SDHSTS_CMD_TIME_OUT             0x40
+#define SDHSTS_CRC16_ERROR              0x20
+#define SDHSTS_CRC7_ERROR               0x10
+#define SDHSTS_FIFO_ERROR               0x08
+/* Reserved */
+/* Reserved */
+#define SDHSTS_DATA_FLAG                0x01
+
+#define SDHCFG_BUSY_IRPT_EN     (1 << 10)
+#define SDHCFG_BLOCK_IRPT_EN    (1 << 8)
+#define SDHCFG_SDIO_IRPT_EN     (1 << 5)
+#define SDHCFG_DATA_IRPT_EN     (1 << 4)
+#define SDHCFG_SLOW_CARD        (1 << 3)
+#define SDHCFG_WIDE_EXT_BUS     (1 << 2)
+#define SDHCFG_WIDE_INT_BUS     (1 << 1)
+#define SDHCFG_REL_CMD_LINE     (1 << 0)
+
+#define SDEDM_FORCE_DATA_MODE   (1 << 19)
+#define SDEDM_CLOCK_PULSE       (1 << 20)
+#define SDEDM_BYPASS            (1 << 21)
+
+#define SDEDM_WRITE_THRESHOLD_SHIFT 9
+#define SDEDM_READ_THRESHOLD_SHIFT 14
+#define SDEDM_THRESHOLD_MASK     0x1f
+
+#define SDEDM_FSM_MASK           0xf
+#define SDEDM_FSM_IDENTMODE      0x0
+#define SDEDM_FSM_DATAMODE       0x1
+#define SDEDM_FSM_READDATA       0x2
+#define SDEDM_FSM_WRITEDATA      0x3
+#define SDEDM_FSM_READWAIT       0x4
+#define SDEDM_FSM_READCRC        0x5
+#define SDEDM_FSM_WRITECRC       0x6
+#define SDEDM_FSM_WRITEWAIT1     0x7
+#define SDEDM_FSM_POWERDOWN      0x8
+#define SDEDM_FSM_POWERUP        0x9
+#define SDEDM_FSM_WRITESTART1    0xa
+#define SDEDM_FSM_WRITESTART2    0xb
+#define SDEDM_FSM_GENPULSES      0xc
+#define SDEDM_FSM_WRITEWAIT2     0xd
+#define SDEDM_FSM_STARTPOWDOWN   0xf
+
+#define SDDATA_FIFO_WORDS        16
+
+static void bcm2835_sdhost_update_irq(BCM2835SDHostState *s)
+{
+    uint32_t irq = s->status &
+        (SDHSTS_BUSY_IRPT | SDHSTS_BLOCK_IRPT | SDHSTS_SDIO_IRPT);
+    qemu_set_irq(s->irq, !!irq);
+}
+
+static void bcm2835_sdhost_send_command(BCM2835SDHostState *s)
+{
+    SDRequest request;
+    uint8_t rsp[16];
+    int rlen;
+
+    request.cmd = s->cmd & SDCMD_CMD_MASK;
+    request.arg = s->cmdarg;
+
+    rlen = sdbus_do_command(&s->sdbus, &request, rsp);
+    if (rlen < 0) {
+        goto error;
+    }
+    if (!(s->cmd & SDCMD_NO_RESPONSE)) {
+#define RWORD(n) (((uint32_t)rsp[n] << 24) | (rsp[n + 1] << 16) \
+                  | (rsp[n + 2] << 8) | rsp[n + 3])
+        if (rlen == 0 || (rlen == 4 && (s->cmd & SDCMD_LONG_RESPONSE))) {
+            goto error;
+        }
+        if (rlen != 4 && rlen != 16) {
+            goto error;
+        }
+        if (rlen == 4) {
+            s->rsp[0] = RWORD(0);
+            s->rsp[1] = s->rsp[2] = s->rsp[3] = 0;
+        } else {
+            s->rsp[0] = RWORD(12);
+            s->rsp[1] = RWORD(8);
+            s->rsp[2] = RWORD(4);
+            s->rsp[3] = RWORD(0);
+        }
+#undef RWORD
+    }
+    return;
+
+error:
+    s->cmd |= SDCMD_FAIL_FLAG;
+    s->status |= SDHSTS_CMD_TIME_OUT;
+}
+
+static void bcm2835_sdhost_fifo_push(BCM2835SDHostState *s, uint32_t value)
+{
+    int n;
+
+    if (s->fifo_len == BCM2835_SDHOST_FIFO_LEN) {
+        /* FIFO overflow */
+        return;
+    }
+    n = (s->fifo_pos + s->fifo_len) & (BCM2835_SDHOST_FIFO_LEN - 1);
+    s->fifo_len++;
+    s->fifo[n] = value;
+}
+
+static uint32_t bcm2835_sdhost_fifo_pop(BCM2835SDHostState *s)
+{
+    uint32_t value;
+
+    if (s->fifo_len == 0) {
+        /* FIFO underflow */
+        return 0;
+    }
+    value = s->fifo[s->fifo_pos];
+    s->fifo_len--;
+    s->fifo_pos = (s->fifo_pos + 1) & (BCM2835_SDHOST_FIFO_LEN - 1);
+    return value;
+}
+
+static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s)
+{
+    uint32_t value = 0;
+    int n;
+    int is_read;
+
+    is_read = (s->cmd & SDCMD_READ_CMD) != 0;
+    if (s->datacnt != 0 && (!is_read || sdbus_data_ready(&s->sdbus))) {
+        if (is_read) {
+            n = 0;
+            while (s->datacnt && s->fifo_len < BCM2835_SDHOST_FIFO_LEN) {
+                value |= (uint32_t)sdbus_read_data(&s->sdbus) << (n * 8);
+                s->datacnt--;
+                n++;
+                if (n == 4) {
+                    bcm2835_sdhost_fifo_push(s, value);
+                    n = 0;
+                    value = 0;
+                }
+            }
+            if (n != 0) {
+                bcm2835_sdhost_fifo_push(s, value);
+            }
+        } else { /* write */
+            n = 0;
+            while (s->datacnt > 0 && (s->fifo_len > 0 || n > 0)) {
+                if (n == 0) {
+                    value = bcm2835_sdhost_fifo_pop(s);
+                    n = 4;
+                }
+                n--;
+                s->datacnt--;
+                sdbus_write_data(&s->sdbus, value & 0xff);
+                value >>= 8;
+            }
+        }
+    }
+    if (s->datacnt == 0) {
+        s->status |= SDHSTS_DATA_FLAG;
+
+        s->edm &= ~0xf;
+        s->edm |= SDEDM_FSM_DATAMODE;
+
+        if (s->config & SDHCFG_DATA_IRPT_EN) {
+            s->status |= SDHSTS_SDIO_IRPT;
+        }
+
+        if ((s->cmd & SDCMD_BUSYWAIT) && (s->config & SDHCFG_BUSY_IRPT_EN)) {
+            s->status |= SDHSTS_BUSY_IRPT;
+        }
+
+        if ((s->cmd & SDCMD_WRITE_CMD) && (s->config & SDHCFG_BLOCK_IRPT_EN)) {
+            s->status |= SDHSTS_BLOCK_IRPT;
+        }
+
+        bcm2835_sdhost_update_irq(s);
+    }
+
+    s->edm &= ~(0x1f << 4);
+    s->edm |= ((s->fifo_len & 0x1f) << 4);
+}
+
+static uint64_t bcm2835_sdhost_read(void *opaque, hwaddr offset,
+    unsigned size)
+{
+    BCM2835SDHostState *s = (BCM2835SDHostState *)opaque;
+    uint32_t res = 0;
+
+    switch (offset) {
+    case SDCMD:
+        res = s->cmd;
+        break;
+    case SDHSTS:
+        res = s->status;
+        break;
+    case SDRSP0:
+        res = s->rsp[0];
+        break;
+    case SDRSP1:
+        res = s->rsp[1];
+        break;
+    case SDRSP2:
+        res = s->rsp[2];
+        break;
+    case SDRSP3:
+        res = s->rsp[3];
+        break;
+    case SDEDM:
+        res = s->edm;
+        break;
+    case SDVDD:
+        res = s->vdd;
+        break;
+    case SDDATA:
+        res = bcm2835_sdhost_fifo_pop(s);
+        bcm2835_sdhost_fifo_run(s);
+        break;
+    case SDHBCT:
+        res = s->hbct;
+        break;
+    case SDHBLC:
+        res = s->hblc;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+                      __func__, offset);
+        res = 0;
+        break;
+    }
+
+    return res;
+}
+
+static void bcm2835_sdhost_write(void *opaque, hwaddr offset,
+    uint64_t value, unsigned size)
+{
+    BCM2835SDHostState *s = (BCM2835SDHostState *)opaque;
+
+    switch (offset) {
+    case SDCMD:
+        s->cmd = value;
+        if (value & SDCMD_NEW_FLAG) {
+            bcm2835_sdhost_send_command(s);
+            bcm2835_sdhost_fifo_run(s);
+            s->cmd &= ~SDCMD_NEW_FLAG;
+        }
+        break;
+    case SDTOUT:
+        break;
+    case SDCDIV:
+        break;
+    case SDHSTS:
+        s->status &= ~value;
+        bcm2835_sdhost_update_irq(s);
+        break;
+    case SDARG:
+        s->cmdarg = value;
+        break;
+    case SDEDM:
+        if ((value & 0xf) == 0xf) {
+            /* power down */
+            value &= ~0xf;
+        }
+        s->edm = value;
+        break;
+    case SDHCFG:
+        s->config = value;
+        bcm2835_sdhost_fifo_run(s);
+        break;
+    case SDVDD:
+        s->vdd = value;
+        break;
+    case SDDATA:
+        bcm2835_sdhost_fifo_push(s, value);
+        bcm2835_sdhost_fifo_run(s);
+        break;
+    case SDHBCT:
+        s->hbct = value;
+        break;
+    case SDHBLC:
+        s->hblc = value;
+        s->datacnt = s->hblc * s->hbct;
+        bcm2835_sdhost_fifo_run(s);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+                      __func__, offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps bcm2835_sdhost_ops = {
+    .read = bcm2835_sdhost_read,
+    .write = bcm2835_sdhost_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_bcm2835_sdhost = {
+    .name = TYPE_BCM2835_SDHOST,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cmd, BCM2835SDHostState),
+        VMSTATE_UINT32(cmdarg, BCM2835SDHostState),
+        VMSTATE_UINT32(status, BCM2835SDHostState),
+        VMSTATE_UINT32_ARRAY(rsp, BCM2835SDHostState, 4),
+        VMSTATE_UINT32(config, BCM2835SDHostState),
+        VMSTATE_UINT32(edm, BCM2835SDHostState),
+        VMSTATE_UINT32(vdd, BCM2835SDHostState),
+        VMSTATE_UINT32(hbct, BCM2835SDHostState),
+        VMSTATE_UINT32(hblc, BCM2835SDHostState),
+        VMSTATE_INT32(fifo_pos, BCM2835SDHostState),
+        VMSTATE_INT32(fifo_len, BCM2835SDHostState),
+        VMSTATE_UINT32_ARRAY(fifo, BCM2835SDHostState, BCM2835_SDHOST_FIFO_LEN),
+        VMSTATE_UINT32(datacnt, BCM2835SDHostState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void bcm2835_sdhost_init(Object *obj)
+{
+    BCM2835SDHostState *s = BCM2835_SDHOST(obj);
+
+    qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
+                        TYPE_BCM2835_SDHOST_BUS, DEVICE(s), "sd-bus");
+
+    memory_region_init_io(&s->iomem, obj, &bcm2835_sdhost_ops, s,
+                          TYPE_BCM2835_SDHOST, 0x1000);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq);
+}
+
+static void bcm2835_sdhost_reset(DeviceState *dev)
+{
+    BCM2835SDHostState *s = BCM2835_SDHOST(dev);
+
+    s->cmd = 0;
+    s->cmdarg = 0;
+    s->edm = 0x0000c60f;
+    s->config = 0;
+    s->hbct = 0;
+    s->hblc = 0;
+    s->datacnt = 0;
+    s->fifo_pos = 0;
+    s->fifo_len = 0;
+}
+
+static void bcm2835_sdhost_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = bcm2835_sdhost_reset;
+    dc->vmsd = &vmstate_bcm2835_sdhost;
+}
+
+static TypeInfo bcm2835_sdhost_info = {
+    .name          = TYPE_BCM2835_SDHOST,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(BCM2835SDHostState),
+    .class_init    = bcm2835_sdhost_class_init,
+    .instance_init = bcm2835_sdhost_init,
+};
+
+static const TypeInfo bcm2835_sdhost_bus_info = {
+    .name = TYPE_BCM2835_SDHOST_BUS,
+    .parent = TYPE_SD_BUS,
+    .instance_size = sizeof(SDBus),
+};
+
+static void bcm2835_sdhost_register_types(void)
+{
+    type_register_static(&bcm2835_sdhost_info);
+    type_register_static(&bcm2835_sdhost_bus_info);
+}
+
+type_init(bcm2835_sdhost_register_types)