hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 141 deletions

diff --git a/hw/puv3_gpio.c b/hw/puv3_gpio.c
deleted file mode 100644
index 5bab97e95a..0000000000
--- a/hw/puv3_gpio.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * GPIO device simulation in PKUnity SoC
- *
- * Copyright (C) 2010-2012 Guan Xuetao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation, or any later version.
- * See the COPYING file in the top-level directory.
- */
-#include "hw/hw.h"
-#include "hw/sysbus.h"
-
-#undef DEBUG_PUV3
-#include "hw/unicore32/puv3.h"
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    qemu_irq irq[9];
-
-    uint32_t reg_GPLR;
-    uint32_t reg_GPDR;
-    uint32_t reg_GPIR;
-} PUV3GPIOState;
-
-static uint64_t puv3_gpio_read(void *opaque, hwaddr offset,
-        unsigned size)
-{
-    PUV3GPIOState *s = opaque;
-    uint32_t ret = 0;
-
-    switch (offset) {
-    case 0x00:
-        ret = s->reg_GPLR;
-        break;
-    case 0x04:
-        ret = s->reg_GPDR;
-        break;
-    case 0x20:
-        ret = s->reg_GPIR;
-        break;
-    default:
-        DPRINTF("Bad offset 0x%x\n", offset);
-    }
-    DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
-
-    return ret;
-}
-
-static void puv3_gpio_write(void *opaque, hwaddr offset,
-        uint64_t value, unsigned size)
-{
-    PUV3GPIOState *s = opaque;
-
-    DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
-    switch (offset) {
-    case 0x04:
-        s->reg_GPDR = value;
-        break;
-    case 0x08:
-        if (s->reg_GPDR & value) {
-            s->reg_GPLR |= value;
-        } else {
-            DPRINTF("Write gpio input port error!");
-        }
-        break;
-    case 0x0c:
-        if (s->reg_GPDR & value) {
-            s->reg_GPLR &= ~value;
-        } else {
-            DPRINTF("Write gpio input port error!");
-        }
-        break;
-    case 0x10: /* GRER */
-    case 0x14: /* GFER */
-    case 0x18: /* GEDR */
-        break;
-    case 0x20: /* GPIR */
-        s->reg_GPIR = value;
-        break;
-    default:
-        DPRINTF("Bad offset 0x%x\n", offset);
-    }
-}
-
-static const MemoryRegionOps puv3_gpio_ops = {
-    .read = puv3_gpio_read,
-    .write = puv3_gpio_write,
-    .impl = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int puv3_gpio_init(SysBusDevice *dev)
-{
-    PUV3GPIOState *s = FROM_SYSBUS(PUV3GPIOState, dev);
-
-    s->reg_GPLR = 0;
-    s->reg_GPDR = 0;
-
-    /* FIXME: these irqs not handled yet */
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW0]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW1]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW2]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW3]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW4]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW5]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW6]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW7]);
-    sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOHIGH]);
-
-    memory_region_init_io(&s->iomem, &puv3_gpio_ops, s, "puv3_gpio",
-            PUV3_REGS_OFFSET);
-    sysbus_init_mmio(dev, &s->iomem);
-
-    return 0;
-}
-
-static void puv3_gpio_class_init(ObjectClass *klass, void *data)
-{
-    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
-
-    sdc->init = puv3_gpio_init;
-}
-
-static const TypeInfo puv3_gpio_info = {
-    .name = "puv3_gpio",
-    .parent = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(PUV3GPIOState),
-    .class_init = puv3_gpio_class_init,
-};
-
-static void puv3_gpio_register_type(void)
-{
-    type_register_static(&puv3_gpio_info);
-}
-
-type_init(puv3_gpio_register_type)