hw: move private headers to hw/ subdirectories.

Many headers are used only in a single directory.  These can be
kept in hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 216 deletions

diff --git a/hw/ppc-viosrp.h b/hw/ppc-viosrp.h
deleted file mode 100644
index d8e365db1e..0000000000
--- a/hw/ppc-viosrp.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*****************************************************************************/
-/* srp.h -- SCSI RDMA Protocol definitions                                   */
-/*                                                                           */
-/* Written By: Colin Devilbis, IBM Corporation                               */
-/*                                                                           */
-/* Copyright (C) 2003 IBM Corporation                                        */
-/*                                                                           */
-/* This program is free software; you can redistribute it and/or modify      */
-/* it under the terms of the GNU General Public License as published by      */
-/* the Free Software Foundation; either version 2 of the License, or         */
-/* (at your option) any later version.                                       */
-/*                                                                           */
-/* This program is distributed in the hope that it will be useful,           */
-/* but WITHOUT ANY WARRANTY; without even the implied warranty of            */
-/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the             */
-/* GNU General Public License for more details.                              */
-/*                                                                           */
-/* You should have received a copy of the GNU General Public License         */
-/* along with this program; if not, write to the Free Software               */
-/* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
-/*                                                                           */
-/*                                                                           */
-/* This file contains structures and definitions for IBM RPA (RS/6000        */
-/* platform architecture) implementation of the SRP (SCSI RDMA Protocol)     */
-/* standard.  SRP is used on IBM iSeries and pSeries platforms to send SCSI  */
-/* commands between logical partitions.                                      */
-/*                                                                           */
-/* SRP Information Units (IUs) are sent on a "Command/Response Queue" (CRQ)  */
-/* between partitions.  The definitions in this file are architected,        */
-/* and cannot be changed without breaking compatibility with other versions  */
-/* of Linux and other operating systems (AIX, OS/400) that talk this protocol*/
-/* between logical partitions                                                */
-/*****************************************************************************/
-#ifndef PPC_VIOSRP_H
-#define PPC_VIOSRP_H
-
-#define SRP_VERSION "16.a"
-#define SRP_MAX_IU_LEN    256
-#define SRP_MAX_LOC_LEN 32
-
-union srp_iu {
-    struct srp_login_req login_req;
-    struct srp_login_rsp login_rsp;
-    struct srp_login_rej login_rej;
-    struct srp_i_logout i_logout;
-    struct srp_t_logout t_logout;
-    struct srp_tsk_mgmt tsk_mgmt;
-    struct srp_cmd cmd;
-    struct srp_rsp rsp;
-    uint8_t reserved[SRP_MAX_IU_LEN];
-};
-
-enum viosrp_crq_formats {
-    VIOSRP_SRP_FORMAT = 0x01,
-    VIOSRP_MAD_FORMAT = 0x02,
-    VIOSRP_OS400_FORMAT = 0x03,
-    VIOSRP_AIX_FORMAT = 0x04,
-    VIOSRP_LINUX_FORMAT = 0x06,
-    VIOSRP_INLINE_FORMAT = 0x07
-};
-
-enum viosrp_crq_status {
-    VIOSRP_OK = 0x0,
-    VIOSRP_NONRECOVERABLE_ERR = 0x1,
-    VIOSRP_VIOLATES_MAX_XFER = 0x2,
-    VIOSRP_PARTNER_PANIC = 0x3,
-    VIOSRP_DEVICE_BUSY = 0x8,
-    VIOSRP_ADAPTER_FAIL = 0x10,
-    VIOSRP_OK2 = 0x99,
-};
-
-struct viosrp_crq {
-    uint8_t valid;        /* used by RPA */
-    uint8_t format;        /* SCSI vs out-of-band */
-    uint8_t reserved;
-    uint8_t status;        /* non-scsi failure? (e.g. DMA failure) */
-    uint16_t timeout;        /* in seconds */
-    uint16_t IU_length;        /* in bytes */
-    uint64_t IU_data_ptr;    /* the TCE for transferring data */
-};
-
-/* MADs are Management requests above and beyond the IUs defined in the SRP
- * standard.
- */
-enum viosrp_mad_types {
-    VIOSRP_EMPTY_IU_TYPE = 0x01,
-    VIOSRP_ERROR_LOG_TYPE = 0x02,
-    VIOSRP_ADAPTER_INFO_TYPE = 0x03,
-    VIOSRP_HOST_CONFIG_TYPE = 0x04,
-    VIOSRP_CAPABILITIES_TYPE = 0x05,
-    VIOSRP_ENABLE_FAST_FAIL = 0x08,
-};
-
-enum viosrp_mad_status {
-    VIOSRP_MAD_SUCCESS = 0x00,
-    VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
-    VIOSRP_MAD_FAILED = 0xF7,
-};
-
-enum viosrp_capability_type {
-    MIGRATION_CAPABILITIES = 0x01,
-    RESERVATION_CAPABILITIES = 0x02,
-};
-
-enum viosrp_capability_support {
-    SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
-    SERVER_SUPPORTS_CAP = 0x01,
-    SERVER_CAP_DATA = 0x02,
-};
-
-enum viosrp_reserve_type {
-    CLIENT_RESERVE_SCSI_2 = 0x01,
-};
-
-enum viosrp_capability_flag {
-    CLIENT_MIGRATED = 0x01,
-    CLIENT_RECONNECT = 0x02,
-    CAP_LIST_SUPPORTED = 0x04,
-    CAP_LIST_DATA = 0x08,
-};
-
-/*
- * Common MAD header
- */
-struct mad_common {
-    uint32_t type;
-    uint16_t status;
-    uint16_t length;
-    uint64_t tag;
-};
-
-/*
- * All SRP (and MAD) requests normally flow from the
- * client to the server.  There is no way for the server to send
- * an asynchronous message back to the client.  The Empty IU is used
- * to hang out a meaningless request to the server so that it can respond
- * asynchrouously with something like a SCSI AER
- */
-struct viosrp_empty_iu {
-    struct mad_common common;
-    uint64_t buffer;
-    uint32_t port;
-};
-
-struct viosrp_error_log {
-    struct mad_common common;
-    uint64_t buffer;
-};
-
-struct viosrp_adapter_info {
-    struct mad_common common;
-    uint64_t buffer;
-};
-
-struct viosrp_host_config {
-    struct mad_common common;
-    uint64_t buffer;
-};
-
-struct viosrp_fast_fail {
-    struct mad_common common;
-};
-
-struct viosrp_capabilities {
-    struct mad_common common;
-    uint64_t buffer;
-};
-
-struct mad_capability_common {
-    uint32_t cap_type;
-    uint16_t length;
-    uint16_t server_support;
-};
-
-struct mad_reserve_cap {
-    struct mad_capability_common common;
-    uint32_t type;
-};
-
-struct mad_migration_cap {
-    struct mad_capability_common common;
-    uint32_t ecl;
-};
-
-struct capabilities {
-    uint32_t flags;
-    char name[SRP_MAX_LOC_LEN];
-    char loc[SRP_MAX_LOC_LEN];
-    struct mad_migration_cap migration;
-    struct mad_reserve_cap reserve;
-};
-
-union mad_iu {
-    struct viosrp_empty_iu empty_iu;
-    struct viosrp_error_log error_log;
-    struct viosrp_adapter_info adapter_info;
-    struct viosrp_host_config host_config;
-    struct viosrp_fast_fail fast_fail;
-    struct viosrp_capabilities capabilities;
-};
-
-union viosrp_iu {
-    union srp_iu srp;
-    union mad_iu mad;
-};
-
-struct mad_adapter_info_data {
-    char srp_version[8];
-    char partition_name[96];
-    uint32_t partition_number;
-    uint32_t mad_version;
-    uint32_t os_type;
-    uint32_t port_max_txu[8];    /* per-port maximum transfer */
-};
-
-#endif