hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 336 deletions

diff --git a/hw/pl061.c b/hw/pl061.c
deleted file mode 100644
index 74bc109488..0000000000
--- a/hw/pl061.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Arm PrimeCell PL061 General Purpose IO with additional
- * Luminary Micro Stellaris bits.
- *
- * Copyright (c) 2007 CodeSourcery.
- * Written by Paul Brook
- *
- * This code is licensed under the GPL.
- */
-
-#include "hw/sysbus.h"
-
-//#define DEBUG_PL061 1
-
-#ifdef DEBUG_PL061
-#define DPRINTF(fmt, ...) \
-do { printf("pl061: " fmt , ## __VA_ARGS__); } while (0)
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__);} while (0)
-#endif
-
-static const uint8_t pl061_id[12] =
-  { 0x00, 0x00, 0x00, 0x00, 0x61, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
-static const uint8_t pl061_id_luminary[12] =
-  { 0x00, 0x00, 0x00, 0x00, 0x61, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    uint32_t locked;
-    uint32_t data;
-    uint32_t old_data;
-    uint32_t dir;
-    uint32_t isense;
-    uint32_t ibe;
-    uint32_t iev;
-    uint32_t im;
-    uint32_t istate;
-    uint32_t afsel;
-    uint32_t dr2r;
-    uint32_t dr4r;
-    uint32_t dr8r;
-    uint32_t odr;
-    uint32_t pur;
-    uint32_t pdr;
-    uint32_t slr;
-    uint32_t den;
-    uint32_t cr;
-    uint32_t float_high;
-    uint32_t amsel;
-    qemu_irq irq;
-    qemu_irq out[8];
-    const unsigned char *id;
-} pl061_state;
-
-static const VMStateDescription vmstate_pl061 = {
-    .name = "pl061",
-    .version_id = 2,
-    .minimum_version_id = 1,
-    .fields = (VMStateField[]) {
-        VMSTATE_UINT32(locked, pl061_state),
-        VMSTATE_UINT32(data, pl061_state),
-        VMSTATE_UINT32(old_data, pl061_state),
-        VMSTATE_UINT32(dir, pl061_state),
-        VMSTATE_UINT32(isense, pl061_state),
-        VMSTATE_UINT32(ibe, pl061_state),
-        VMSTATE_UINT32(iev, pl061_state),
-        VMSTATE_UINT32(im, pl061_state),
-        VMSTATE_UINT32(istate, pl061_state),
-        VMSTATE_UINT32(afsel, pl061_state),
-        VMSTATE_UINT32(dr2r, pl061_state),
-        VMSTATE_UINT32(dr4r, pl061_state),
-        VMSTATE_UINT32(dr8r, pl061_state),
-        VMSTATE_UINT32(odr, pl061_state),
-        VMSTATE_UINT32(pur, pl061_state),
-        VMSTATE_UINT32(pdr, pl061_state),
-        VMSTATE_UINT32(slr, pl061_state),
-        VMSTATE_UINT32(den, pl061_state),
-        VMSTATE_UINT32(cr, pl061_state),
-        VMSTATE_UINT32(float_high, pl061_state),
-        VMSTATE_UINT32_V(amsel, pl061_state, 2),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static void pl061_update(pl061_state *s)
-{
-    uint8_t changed;
-    uint8_t mask;
-    uint8_t out;
-    int i;
-
-    /* Outputs float high.  */
-    /* FIXME: This is board dependent.  */
-    out = (s->data & s->dir) | ~s->dir;
-    changed = s->old_data ^ out;
-    if (!changed)
-        return;
-
-    s->old_data = out;
-    for (i = 0; i < 8; i++) {
-        mask = 1 << i;
-        if (changed & mask) {
-            DPRINTF("Set output %d = %d\n", i, (out & mask) != 0);
-            qemu_set_irq(s->out[i], (out & mask) != 0);
-        }
-    }
-
-    /* FIXME: Implement input interrupts.  */
-}
-
-static uint64_t pl061_read(void *opaque, hwaddr offset,
-                           unsigned size)
-{
-    pl061_state *s = (pl061_state *)opaque;
-
-    if (offset >= 0xfd0 && offset < 0x1000) {
-        return s->id[(offset - 0xfd0) >> 2];
-    }
-    if (offset < 0x400) {
-        return s->data & (offset >> 2);
-    }
-    switch (offset) {
-    case 0x400: /* Direction */
-        return s->dir;
-    case 0x404: /* Interrupt sense */
-        return s->isense;
-    case 0x408: /* Interrupt both edges */
-        return s->ibe;
-    case 0x40c: /* Interrupt event */
-        return s->iev;
-    case 0x410: /* Interrupt mask */
-        return s->im;
-    case 0x414: /* Raw interrupt status */
-        return s->istate;
-    case 0x418: /* Masked interrupt status */
-        return s->istate | s->im;
-    case 0x420: /* Alternate function select */
-        return s->afsel;
-    case 0x500: /* 2mA drive */
-        return s->dr2r;
-    case 0x504: /* 4mA drive */
-        return s->dr4r;
-    case 0x508: /* 8mA drive */
-        return s->dr8r;
-    case 0x50c: /* Open drain */
-        return s->odr;
-    case 0x510: /* Pull-up */
-        return s->pur;
-    case 0x514: /* Pull-down */
-        return s->pdr;
-    case 0x518: /* Slew rate control */
-        return s->slr;
-    case 0x51c: /* Digital enable */
-        return s->den;
-    case 0x520: /* Lock */
-        return s->locked;
-    case 0x524: /* Commit */
-        return s->cr;
-    case 0x528: /* Analog mode select */
-        return s->amsel;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_read: Bad offset %x\n", (int)offset);
-        return 0;
-    }
-}
-
-static void pl061_write(void *opaque, hwaddr offset,
-                        uint64_t value, unsigned size)
-{
-    pl061_state *s = (pl061_state *)opaque;
-    uint8_t mask;
-
-    if (offset < 0x400) {
-        mask = (offset >> 2) & s->dir;
-        s->data = (s->data & ~mask) | (value & mask);
-        pl061_update(s);
-        return;
-    }
-    switch (offset) {
-    case 0x400: /* Direction */
-        s->dir = value & 0xff;
-        break;
-    case 0x404: /* Interrupt sense */
-        s->isense = value & 0xff;
-        break;
-    case 0x408: /* Interrupt both edges */
-        s->ibe = value & 0xff;
-        break;
-    case 0x40c: /* Interrupt event */
-        s->iev = value & 0xff;
-        break;
-    case 0x410: /* Interrupt mask */
-        s->im = value & 0xff;
-        break;
-    case 0x41c: /* Interrupt clear */
-        s->istate &= ~value;
-        break;
-    case 0x420: /* Alternate function select */
-        mask = s->cr;
-        s->afsel = (s->afsel & ~mask) | (value & mask);
-        break;
-    case 0x500: /* 2mA drive */
-        s->dr2r = value & 0xff;
-        break;
-    case 0x504: /* 4mA drive */
-        s->dr4r = value & 0xff;
-        break;
-    case 0x508: /* 8mA drive */
-        s->dr8r = value & 0xff;
-        break;
-    case 0x50c: /* Open drain */
-        s->odr = value & 0xff;
-        break;
-    case 0x510: /* Pull-up */
-        s->pur = value & 0xff;
-        break;
-    case 0x514: /* Pull-down */
-        s->pdr = value & 0xff;
-        break;
-    case 0x518: /* Slew rate control */
-        s->slr = value & 0xff;
-        break;
-    case 0x51c: /* Digital enable */
-        s->den = value & 0xff;
-        break;
-    case 0x520: /* Lock */
-        s->locked = (value != 0xacce551);
-        break;
-    case 0x524: /* Commit */
-        if (!s->locked)
-            s->cr = value & 0xff;
-        break;
-    case 0x528:
-        s->amsel = value & 0xff;
-        break;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_write: Bad offset %x\n", (int)offset);
-    }
-    pl061_update(s);
-}
-
-static void pl061_reset(pl061_state *s)
-{
-  s->locked = 1;
-  s->cr = 0xff;
-}
-
-static void pl061_set_irq(void * opaque, int irq, int level)
-{
-    pl061_state *s = (pl061_state *)opaque;
-    uint8_t mask;
-
-    mask = 1 << irq;
-    if ((s->dir & mask) == 0) {
-        s->data &= ~mask;
-        if (level)
-            s->data |= mask;
-        pl061_update(s);
-    }
-}
-
-static const MemoryRegionOps pl061_ops = {
-    .read = pl061_read,
-    .write = pl061_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int pl061_init(SysBusDevice *dev, const unsigned char *id)
-{
-    pl061_state *s = FROM_SYSBUS(pl061_state, dev);
-    s->id = id;
-    memory_region_init_io(&s->iomem, &pl061_ops, s, "pl061", 0x1000);
-    sysbus_init_mmio(dev, &s->iomem);
-    sysbus_init_irq(dev, &s->irq);
-    qdev_init_gpio_in(&dev->qdev, pl061_set_irq, 8);
-    qdev_init_gpio_out(&dev->qdev, s->out, 8);
-    pl061_reset(s);
-    return 0;
-}
-
-static int pl061_init_luminary(SysBusDevice *dev)
-{
-    return pl061_init(dev, pl061_id_luminary);
-}
-
-static int pl061_init_arm(SysBusDevice *dev)
-{
-    return pl061_init(dev, pl061_id);
-}
-
-static void pl061_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = pl061_init_arm;
-    dc->vmsd = &vmstate_pl061;
-}
-
-static const TypeInfo pl061_info = {
-    .name          = "pl061",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(pl061_state),
-    .class_init    = pl061_class_init,
-};
-
-static void pl061_luminary_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = pl061_init_luminary;
-    dc->vmsd = &vmstate_pl061;
-}
-
-static const TypeInfo pl061_luminary_info = {
-    .name          = "pl061_luminary",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(pl061_state),
-    .class_init    = pl061_luminary_class_init,
-};
-
-static void pl061_register_types(void)
-{
-    type_register_static(&pl061_info);
-    type_register_static(&pl061_luminary_info);
-}
-
-type_init(pl061_register_types)