hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 265 deletions

diff --git a/hw/pl031.c b/hw/pl031.c
deleted file mode 100644
index 764940be7e..0000000000
--- a/hw/pl031.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * ARM AMBA PrimeCell PL031 RTC
- *
- * Copyright (c) 2007 CodeSourcery
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "hw/sysbus.h"
-#include "qemu/timer.h"
-#include "sysemu/sysemu.h"
-
-//#define DEBUG_PL031
-
-#ifdef DEBUG_PL031
-#define DPRINTF(fmt, ...) \
-do { printf("pl031: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#endif
-
-#define RTC_DR      0x00    /* Data read register */
-#define RTC_MR      0x04    /* Match register */
-#define RTC_LR      0x08    /* Data load register */
-#define RTC_CR      0x0c    /* Control register */
-#define RTC_IMSC    0x10    /* Interrupt mask and set register */
-#define RTC_RIS     0x14    /* Raw interrupt status register */
-#define RTC_MIS     0x18    /* Masked interrupt status register */
-#define RTC_ICR     0x1c    /* Interrupt clear register */
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    QEMUTimer *timer;
-    qemu_irq irq;
-
-    /* Needed to preserve the tick_count across migration, even if the
-     * absolute value of the rtc_clock is different on the source and
-     * destination.
-     */
-    uint32_t tick_offset_vmstate;
-    uint32_t tick_offset;
-
-    uint32_t mr;
-    uint32_t lr;
-    uint32_t cr;
-    uint32_t im;
-    uint32_t is;
-} pl031_state;
-
-static const unsigned char pl031_id[] = {
-    0x31, 0x10, 0x14, 0x00,         /* Device ID        */
-    0x0d, 0xf0, 0x05, 0xb1          /* Cell ID      */
-};
-
-static void pl031_update(pl031_state *s)
-{
-    qemu_set_irq(s->irq, s->is & s->im);
-}
-
-static void pl031_interrupt(void * opaque)
-{
-    pl031_state *s = (pl031_state *)opaque;
-
-    s->is = 1;
-    DPRINTF("Alarm raised\n");
-    pl031_update(s);
-}
-
-static uint32_t pl031_get_count(pl031_state *s)
-{
-    int64_t now = qemu_get_clock_ns(rtc_clock);
-    return s->tick_offset + now / get_ticks_per_sec();
-}
-
-static void pl031_set_alarm(pl031_state *s)
-{
-    uint32_t ticks;
-
-    /* The timer wraps around.  This subtraction also wraps in the same way,
-       and gives correct results when alarm < now_ticks.  */
-    ticks = s->mr - pl031_get_count(s);
-    DPRINTF("Alarm set in %ud ticks\n", ticks);
-    if (ticks == 0) {
-        qemu_del_timer(s->timer);
-        pl031_interrupt(s);
-    } else {
-        int64_t now = qemu_get_clock_ns(rtc_clock);
-        qemu_mod_timer(s->timer, now + (int64_t)ticks * get_ticks_per_sec());
-    }
-}
-
-static uint64_t pl031_read(void *opaque, hwaddr offset,
-                           unsigned size)
-{
-    pl031_state *s = (pl031_state *)opaque;
-
-    if (offset >= 0xfe0  &&  offset < 0x1000)
-        return pl031_id[(offset - 0xfe0) >> 2];
-
-    switch (offset) {
-    case RTC_DR:
-        return pl031_get_count(s);
-    case RTC_MR:
-        return s->mr;
-    case RTC_IMSC:
-        return s->im;
-    case RTC_RIS:
-        return s->is;
-    case RTC_LR:
-        return s->lr;
-    case RTC_CR:
-        /* RTC is permanently enabled.  */
-        return 1;
-    case RTC_MIS:
-        return s->is & s->im;
-    case RTC_ICR:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl031: read of write-only register at offset 0x%x\n",
-                      (int)offset);
-        break;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl031_read: Bad offset 0x%x\n", (int)offset);
-        break;
-    }
-
-    return 0;
-}
-
-static void pl031_write(void * opaque, hwaddr offset,
-                        uint64_t value, unsigned size)
-{
-    pl031_state *s = (pl031_state *)opaque;
-
-
-    switch (offset) {
-    case RTC_LR:
-        s->tick_offset += value - pl031_get_count(s);
-        pl031_set_alarm(s);
-        break;
-    case RTC_MR:
-        s->mr = value;
-        pl031_set_alarm(s);
-        break;
-    case RTC_IMSC:
-        s->im = value & 1;
-        DPRINTF("Interrupt mask %d\n", s->im);
-        pl031_update(s);
-        break;
-    case RTC_ICR:
-        /* The PL031 documentation (DDI0224B) states that the interrupt is
-           cleared when bit 0 of the written value is set.  However the
-           arm926e documentation (DDI0287B) states that the interrupt is
-           cleared when any value is written.  */
-        DPRINTF("Interrupt cleared");
-        s->is = 0;
-        pl031_update(s);
-        break;
-    case RTC_CR:
-        /* Written value is ignored.  */
-        break;
-
-    case RTC_DR:
-    case RTC_MIS:
-    case RTC_RIS:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl031: write to read-only register at offset 0x%x\n",
-                      (int)offset);
-        break;
-
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl031_write: Bad offset 0x%x\n", (int)offset);
-        break;
-    }
-}
-
-static const MemoryRegionOps pl031_ops = {
-    .read = pl031_read,
-    .write = pl031_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int pl031_init(SysBusDevice *dev)
-{
-    pl031_state *s = FROM_SYSBUS(pl031_state, dev);
-    struct tm tm;
-
-    memory_region_init_io(&s->iomem, &pl031_ops, s, "pl031", 0x1000);
-    sysbus_init_mmio(dev, &s->iomem);
-
-    sysbus_init_irq(dev, &s->irq);
-    qemu_get_timedate(&tm, 0);
-    s->tick_offset = mktimegm(&tm) - qemu_get_clock_ns(rtc_clock) / get_ticks_per_sec();
-
-    s->timer = qemu_new_timer_ns(rtc_clock, pl031_interrupt, s);
-    return 0;
-}
-
-static void pl031_pre_save(void *opaque)
-{
-    pl031_state *s = opaque;
-
-    /* tick_offset is base_time - rtc_clock base time.  Instead, we want to
-     * store the base time relative to the vm_clock for backwards-compatibility.  */
-    int64_t delta = qemu_get_clock_ns(rtc_clock) - qemu_get_clock_ns(vm_clock);
-    s->tick_offset_vmstate = s->tick_offset + delta / get_ticks_per_sec();
-}
-
-static int pl031_post_load(void *opaque, int version_id)
-{
-    pl031_state *s = opaque;
-
-    int64_t delta = qemu_get_clock_ns(rtc_clock) - qemu_get_clock_ns(vm_clock);
-    s->tick_offset = s->tick_offset_vmstate - delta / get_ticks_per_sec();
-    pl031_set_alarm(s);
-    return 0;
-}
-
-static const VMStateDescription vmstate_pl031 = {
-    .name = "pl031",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .pre_save = pl031_pre_save,
-    .post_load = pl031_post_load,
-    .fields = (VMStateField[]) {
-        VMSTATE_UINT32(tick_offset_vmstate, pl031_state),
-        VMSTATE_UINT32(mr, pl031_state),
-        VMSTATE_UINT32(lr, pl031_state),
-        VMSTATE_UINT32(cr, pl031_state),
-        VMSTATE_UINT32(im, pl031_state),
-        VMSTATE_UINT32(is, pl031_state),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static void pl031_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = pl031_init;
-    dc->no_user = 1;
-    dc->vmsd = &vmstate_pl031;
-}
-
-static const TypeInfo pl031_info = {
-    .name          = "pl031",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(pl031_state),
-    .class_init    = pl031_class_init,
-};
-
-static void pl031_register_types(void)
-{
-    type_register_static(&pl031_info);
-}
-
-type_init(pl031_register_types)