AMD NOR flash device support (initial patch by Jocelyn Mayer)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2022 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 627 insertions, 0 deletions

diff --git a/hw/pflash_cfi02.c b/hw/pflash_cfi02.c
new file mode 100644
index 0000000000..1f0cbe2f9a
--- /dev/null
+++ b/hw/pflash_cfi02.c
@@ -0,0 +1,627 @@
+/*
+ *  CFI parallel flash with AMD command set emulation
+ * 
+ *  Copyright (c) 2005 Jocelyn Mayer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
+ * Supported commands/modes are:
+ * - flash read
+ * - flash write
+ * - flash ID read
+ * - sector erase
+ * - chip erase
+ * - unlock bypass command
+ * - CFI queries
+ *
+ * It does not support flash interleaving.
+ * It does not implement boot blocs with reduced size
+ * It does not implement software data protection as found in many real chips
+ * It does not implement erase suspend/resume commands
+ * It does not implement multiple sectors erase
+ */
+
+#include "vl.h"
+
+//#define PFLASH_DEBUG
+#ifdef PFLASH_DEBUG
+#define DPRINTF(fmt, args...)                      \
+do {                                               \
+    if (loglevel)                                  \
+        fprintf(logfile, "PFLASH: " fmt , ##args); \
+    else                                           \
+        printf("PFLASH: " fmt , ##args);           \
+} while (0)
+#else
+#define DPRINTF(fmt, args...) do { } while (0)
+#endif
+
+struct pflash_t {
+    BlockDriverState *bs;
+    target_ulong base;
+    target_ulong sector_len;
+    target_ulong total_len;
+    int width;
+    int wcycle; /* if 0, the flash is read normally */
+    int bypass;
+    int ro;
+    uint8_t cmd;
+    uint8_t status;
+    uint16_t ident[4];
+    uint8_t cfi_len;
+    uint8_t cfi_table[0x52];
+    QEMUTimer *timer;
+    ram_addr_t off;
+    int fl_mem;
+    void *storage;
+};
+
+static void pflash_timer (void *opaque)
+{
+    pflash_t *pfl = opaque;
+
+    DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
+    /* Reset flash */
+    pfl->status ^= 0x80;
+    if (pfl->bypass) {
+        pfl->wcycle = 2;
+    } else {
+        cpu_register_physical_memory(pfl->base, pfl->total_len,
+                                     pfl->off | IO_MEM_ROMD | pfl->fl_mem);
+        pfl->wcycle = 0;
+    }
+    pfl->cmd = 0;
+}
+
+static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
+{
+    target_ulong boff;
+    uint32_t ret;
+    uint8_t *p;
+
+    DPRINTF("%s: offset %08x\n", __func__, offset);
+    ret = -1;
+    offset -= pfl->base;
+    boff = offset & 0xFF;
+    if (pfl->width == 2)
+        boff = boff >> 1;
+    else if (pfl->width == 4)
+        boff = boff >> 2;
+    switch (pfl->cmd) {
+    default:
+        /* This should never happen : reset state & treat it as a read*/
+        DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
+        pfl->wcycle = 0;
+        pfl->cmd = 0;
+    case 0x80:
+        /* We accept reads during second unlock sequence... */
+    case 0x00:
+    flash_read:
+        /* Flash area read */
+        p = pfl->storage;
+        switch (width) {
+        case 1:
+            ret = p[offset];
+//            DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
+            break;
+        case 2:
+#if defined(TARGET_WORDS_BIGENDIAN)
+            ret = p[offset] << 8;
+            ret |= p[offset + 1];
+#else
+            ret = p[offset];
+            ret |= p[offset + 1] << 8;
+#endif
+//            DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
+            break;
+        case 4:
+#if defined(TARGET_WORDS_BIGENDIAN)
+            ret = p[offset] << 24;
+            ret |= p[offset + 1] << 16;
+            ret |= p[offset + 2] << 8;
+            ret |= p[offset + 3];
+#else
+            ret = p[offset];
+            ret |= p[offset + 1] << 8;
+            ret |= p[offset + 1] << 8;
+            ret |= p[offset + 2] << 16;
+            ret |= p[offset + 3] << 24;
+#endif
+//            DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
+            break;
+        }
+        break;
+    case 0x90:
+        /* flash ID read */
+        switch (boff) {
+        case 0x00:
+        case 0x01:
+            ret = pfl->ident[boff & 0x01];
+            break;
+        case 0x02:
+            ret = 0x00; /* Pretend all sectors are unprotected */
+            break;
+        case 0x0E:
+        case 0x0F:
+            if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1)
+                goto flash_read;
+            ret = pfl->ident[2 + (boff & 0x01)];
+            break;
+        default:
+            goto flash_read;
+        }
+        DPRINTF("%s: ID %d %x\n", __func__, boff, ret);
+        break;
+    case 0xA0:
+    case 0x10:
+    case 0x30:
+        /* Status register read */
+        ret = pfl->status;
+        DPRINTF("%s: status %x\n", __func__, ret);
+        /* Toggle bit 6 */
+        pfl->status ^= 0x40;
+        break;
+    case 0x98:
+        /* CFI query mode */
+        if (boff > pfl->cfi_len)
+            ret = 0;
+        else
+            ret = pfl->cfi_table[boff];
+        break;
+    }
+
+    return ret;
+}
+
+/* update flash content on disk */
+static void pflash_update(pflash_t *pfl, int offset, 
+                          int size)
+{
+    int offset_end;
+    if (pfl->bs) {
+        offset_end = offset + size;
+        /* round to sectors */
+        offset = offset >> 9;
+        offset_end = (offset_end + 511) >> 9;
+        bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9), 
+                   offset_end - offset);
+    }
+}
+
+static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
+                          int width)
+{
+    target_ulong boff;
+    uint8_t *p;
+    uint8_t cmd;
+
+    /* WARNING: when the memory area is in ROMD mode, the offset is a
+       ram offset, not a physical address */
+    if (pfl->wcycle == 0)
+        offset -= pfl->off;
+    else
+        offset -= pfl->base;
+        
+    cmd = value;
+    DPRINTF("%s: offset %08x %08x %d\n", __func__, offset, value, width);
+    if (pfl->cmd != 0xA0 && cmd == 0xF0) {
+        DPRINTF("%s: flash reset asked (%02x %02x)\n",
+                __func__, pfl->cmd, cmd);
+        goto reset_flash;
+    }
+    /* Set the device in I/O access mode */
+    cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
+    boff = offset & (pfl->sector_len - 1);
+    if (pfl->width == 2)
+        boff = boff >> 1;
+    else if (pfl->width == 4)
+        boff = boff >> 2;
+    switch (pfl->wcycle) {
+    case 0:
+        /* We're in read mode */
+    check_unlock0:
+        if (boff == 0x55 && cmd == 0x98) {
+        enter_CFI_mode:
+            /* Enter CFI query mode */
+            pfl->wcycle = 7;
+            pfl->cmd = 0x98;
+            return;
+        }
+        if (boff != 0x555 || cmd != 0xAA) {
+            DPRINTF("%s: unlock0 failed %04x %02x %04x\n",
+                    __func__, boff, cmd, 0x555);
+            goto reset_flash;
+        }
+        DPRINTF("%s: unlock sequence started\n", __func__);
+        break;
+    case 1:
+        /* We started an unlock sequence */
+    check_unlock1:
+        if (boff != 0x2AA || cmd != 0x55) {
+            DPRINTF("%s: unlock1 failed %04x %02x\n", __func__, boff, cmd);
+            goto reset_flash;
+        }
+        DPRINTF("%s: unlock sequence done\n", __func__);
+        break;
+    case 2:
+        /* We finished an unlock sequence */
+        if (!pfl->bypass && boff != 0x555) {
+            DPRINTF("%s: command failed %04x %02x\n", __func__, boff, cmd);
+            goto reset_flash;
+        }
+        switch (cmd) {
+        case 0x20:
+            pfl->bypass = 1;
+            goto do_bypass;
+        case 0x80:
+        case 0x90:
+        case 0xA0:
+            pfl->cmd = cmd;
+            DPRINTF("%s: starting command %02x\n", __func__, cmd);
+            break;
+        default:
+            DPRINTF("%s: unknown command %02x\n", __func__, cmd);
+            goto reset_flash;
+        }
+        break;
+    case 3:
+        switch (pfl->cmd) {
+        case 0x80:
+            /* We need another unlock sequence */
+            goto check_unlock0;
+        case 0xA0:
+            DPRINTF("%s: write data offset %08x %08x %d\n",
+                    __func__, offset, value, width);
+            p = pfl->storage;
+            switch (width) {
+            case 1:
+                p[offset] &= value;
+                pflash_update(pfl, offset, 1);
+                break;
+            case 2:
+#if defined(TARGET_WORDS_BIGENDIAN)
+                p[offset] &= value >> 8;
+                p[offset + 1] &= value;
+#else
+                p[offset] &= value;
+                p[offset + 1] &= value >> 8;
+#endif
+                pflash_update(pfl, offset, 2);
+                break;
+            case 4:
+#if defined(TARGET_WORDS_BIGENDIAN)
+                p[offset] &= value >> 24;
+                p[offset + 1] &= value >> 16;
+                p[offset + 2] &= value >> 8;
+                p[offset + 3] &= value;
+#else
+                p[offset] &= value;
+                p[offset + 1] &= value >> 8;
+                p[offset + 2] &= value >> 16;
+                p[offset + 3] &= value >> 24;
+#endif
+                pflash_update(pfl, offset, 4);
+                break;
+            }
+            pfl->status = 0x00 | ~(value & 0x80);
+            /* Let's pretend write is immediate */
+            if (pfl->bypass)
+                goto do_bypass;
+            goto reset_flash;
+        case 0x90:
+            if (pfl->bypass && cmd == 0x00) {
+                /* Unlock bypass reset */
+                goto reset_flash;
+            }
+            /* We can enter CFI query mode from autoselect mode */
+            if (boff == 0x55 && cmd == 0x98)
+                goto enter_CFI_mode;
+            /* No break here */
+        default:
+            DPRINTF("%s: invalid write for command %02x\n",
+                    __func__, pfl->cmd);
+            goto reset_flash;
+        }
+    case 4:
+        switch (pfl->cmd) {
+        case 0xA0:
+            /* Ignore writes while flash data write is occuring */
+            /* As we suppose write is immediate, this should never happen */
+            return;
+        case 0x80:
+            goto check_unlock1;
+        default:
+            /* Should never happen */
+            DPRINTF("%s: invalid command state %02x (wc 4)\n",
+                    __func__, pfl->cmd);
+            goto reset_flash;
+        }
+        break;
+    case 5:
+        switch (cmd) {
+        case 0x10:
+            if (boff != 0x555) {
+                DPRINTF("%s: chip erase: invalid address %04x\n",
+                        __func__, offset);
+                goto reset_flash;
+            }
+            /* Chip erase */
+            DPRINTF("%s: start chip erase\n", __func__);
+            memset(pfl->storage, 0xFF, pfl->total_len);
+            pfl->status = 0x00;
+            pflash_update(pfl, 0, pfl->total_len);
+            /* Let's wait 5 seconds before chip erase is done */
+            qemu_mod_timer(pfl->timer, 
+                           qemu_get_clock(vm_clock) + (ticks_per_sec * 5));
+            break;
+        case 0x30:
+            /* Sector erase */
+            p = pfl->storage;
+            offset &= ~(pfl->sector_len - 1);
+            DPRINTF("%s: start sector erase at %08x\n", __func__, offset);
+            memset(p + offset, 0xFF, pfl->sector_len);
+            pflash_update(pfl, offset, pfl->sector_len);
+            pfl->status = 0x00;
+            /* Let's wait 1/2 second before sector erase is done */
+            qemu_mod_timer(pfl->timer, 
+                           qemu_get_clock(vm_clock) + (ticks_per_sec / 2));
+            break;
+        default:
+            DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
+            goto reset_flash;
+        }
+        pfl->cmd = cmd;
+        break;
+    case 6:
+        switch (pfl->cmd) {
+        case 0x10:
+            /* Ignore writes during chip erase */
+            return;
+        case 0x30:
+            /* Ignore writes during sector erase */
+            return;
+        default:
+            /* Should never happen */
+            DPRINTF("%s: invalid command state %02x (wc 6)\n",
+                    __func__, pfl->cmd);
+            goto reset_flash;
+        }
+        break;
+    case 7: /* Special value for CFI queries */
+        DPRINTF("%s: invalid write in CFI query mode\n", __func__);
+        goto reset_flash;
+    default:
+        /* Should never happen */
+        DPRINTF("%s: invalid write state (wc 7)\n",  __func__);
+        goto reset_flash;
+    }
+    pfl->wcycle++;
+
+    return;
+
+    /* Reset flash */
+ reset_flash:
+    if (pfl->wcycle != 0) {
+        cpu_register_physical_memory(pfl->base, pfl->total_len,
+                                     pfl->off | IO_MEM_ROMD | pfl->fl_mem);
+    }
+    pfl->bypass = 0;
+    pfl->wcycle = 0;
+    pfl->cmd = 0;
+    return;
+
+ do_bypass:
+    pfl->wcycle = 2;
+    pfl->cmd = 0;
+    return;
+}
+
+
+static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
+{
+    return pflash_read(opaque, addr, 1);
+}
+
+static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
+{
+    pflash_t *pfl = opaque;
+
+    return pflash_read(pfl, addr, 2);
+}
+
+static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
+{
+    pflash_t *pfl = opaque;
+
+    return pflash_read(pfl, addr, 4);
+}
+
+static void pflash_writeb (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_write(opaque, addr, value, 1);
+}
+
+static void pflash_writew (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_t *pfl = opaque;
+
+    pflash_write(pfl, addr, value, 2);
+}
+
+static void pflash_writel (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_t *pfl = opaque;
+
+    pflash_write(pfl, addr, value, 4);
+}
+
+static CPUWriteMemoryFunc *pflash_write_ops[] = {
+    &pflash_writeb,
+    &pflash_writew,
+    &pflash_writel,
+};
+
+static CPUReadMemoryFunc *pflash_read_ops[] = {
+    &pflash_readb,
+    &pflash_readw,
+    &pflash_readl,
+};
+
+/* Count trailing zeroes of a 32 bits quantity */
+static int ctz32 (uint32_t n)
+{
+    int ret;
+
+    ret = 0;
+    if (!(n & 0xFFFF)) {
+        ret += 16;
+        n = n >> 16;
+    }
+    if (!(n & 0xFF)) {
+        ret += 8;
+        n = n >> 8;
+    }
+    if (!(n & 0xF)) {
+        ret += 4;
+        n = n >> 4;
+    }
+    if (!(n & 0x3)) {
+        ret += 2;
+        n = n >> 2;
+    }
+    if (!(n & 0x1)) {
+        ret++;
+        n = n >> 1;
+    }
+#if 0 /* This is not necessary as n is never 0 */
+    if (!n)
+        ret++;
+#endif
+
+    return ret;
+}
+
+pflash_t *pflash_register (target_ulong base, ram_addr_t off,
+                           BlockDriverState *bs,
+                           target_ulong sector_len, int nb_blocs, int width,
+                           uint16_t id0, uint16_t id1, 
+                           uint16_t id2, uint16_t id3)
+{
+    pflash_t *pfl;
+    target_long total_len;
+
+    total_len = sector_len * nb_blocs;
+    /* XXX: to be fixed */
+    if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
+        total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
+        return NULL;
+    pfl = qemu_mallocz(sizeof(pflash_t));
+    if (pfl == NULL)
+        return NULL;
+    pfl->storage = phys_ram_base + off;
+    pfl->fl_mem = cpu_register_io_memory(0, pflash_read_ops, pflash_write_ops, pfl);
+    pfl->off = off;
+    cpu_register_physical_memory(base, total_len,
+                                 off | pfl->fl_mem | IO_MEM_ROMD);
+    pfl->bs = bs;
+    if (pfl->bs) {
+        /* read the initial flash content */
+        bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
+    }
+#if 0 /* XXX: there should be a bit to set up read-only,
+       *      the same way the hardware does (with WP pin).
+       */
+    pfl->ro = 1;
+#else
+    pfl->ro = 0;
+#endif
+    pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
+    pfl->base = base;
+    pfl->sector_len = sector_len;
+    pfl->total_len = total_len;
+    pfl->width = width;
+    pfl->wcycle = 0;
+    pfl->cmd = 0;
+    pfl->status = 0;
+    pfl->ident[0] = id0;
+    pfl->ident[1] = id1;
+    pfl->ident[2] = id2;
+    pfl->ident[3] = id3;
+    /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
+    pfl->cfi_len = 0x52;
+    /* Standard "QRY" string */
+    pfl->cfi_table[0x10] = 'Q';
+    pfl->cfi_table[0x11] = 'R';
+    pfl->cfi_table[0x12] = 'Y';
+    /* Command set (AMD/Fujitsu) */
+    pfl->cfi_table[0x13] = 0x02;
+    pfl->cfi_table[0x14] = 0x00;
+    /* Primary extended table address (none) */
+    pfl->cfi_table[0x15] = 0x00;
+    pfl->cfi_table[0x16] = 0x00;
+    /* Alternate command set (none) */
+    pfl->cfi_table[0x17] = 0x00;
+    pfl->cfi_table[0x18] = 0x00;
+    /* Alternate extended table (none) */
+    pfl->cfi_table[0x19] = 0x00;
+    pfl->cfi_table[0x1A] = 0x00;
+    /* Vcc min */
+    pfl->cfi_table[0x1B] = 0x27;
+    /* Vcc max */
+    pfl->cfi_table[0x1C] = 0x36;
+    /* Vpp min (no Vpp pin) */
+    pfl->cfi_table[0x1D] = 0x00;
+    /* Vpp max (no Vpp pin) */
+    pfl->cfi_table[0x1E] = 0x00;
+    /* Reserved */
+    pfl->cfi_table[0x1F] = 0x07;
+    /* Timeout for min size buffer write (16 µs) */
+    pfl->cfi_table[0x20] = 0x04;
+    /* Typical timeout for block erase (512 ms) */
+    pfl->cfi_table[0x21] = 0x09;
+    /* Typical timeout for full chip erase (4096 ms) */
+    pfl->cfi_table[0x22] = 0x0C;
+    /* Reserved */
+    pfl->cfi_table[0x23] = 0x01;
+    /* Max timeout for buffer write */
+    pfl->cfi_table[0x24] = 0x04;
+    /* Max timeout for block erase */
+    pfl->cfi_table[0x25] = 0x0A;
+    /* Max timeout for chip erase */
+    pfl->cfi_table[0x26] = 0x0D;
+    /* Device size */
+    pfl->cfi_table[0x27] = ctz32(total_len) + 1;
+    /* Flash device interface (8 & 16 bits) */
+    pfl->cfi_table[0x28] = 0x02;
+    pfl->cfi_table[0x29] = 0x00;
+    /* Max number of bytes in multi-bytes write */
+    pfl->cfi_table[0x2A] = 0x05;
+    pfl->cfi_table[0x2B] = 0x00;
+    /* Number of erase block regions (uniform) */
+    pfl->cfi_table[0x2C] = 0x01;
+    /* Erase block region 1 */
+    pfl->cfi_table[0x2D] = nb_blocs - 1;
+    pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
+    pfl->cfi_table[0x2F] = sector_len >> 8;
+    pfl->cfi_table[0x30] = sector_len >> 16;
+
+    return pfl;
+}