pci: Cleanup configuration for pci-hotplug.c

pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed.  They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface.  This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.

CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too.  In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.

Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386.  The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

1 files changed, 292 insertions, 0 deletions

diff --git a/hw/pci/pci-hotplug-old.c b/hw/pci/pci-hotplug-old.c
new file mode 100644
index 0000000000..b3c233caef
--- /dev/null
+++ b/hw/pci/pci-hotplug-old.c
@@ -0,0 +1,292 @@
+/*
+ * Deprecated PCI hotplug interface support
+ * This covers the old pci_add / pci_del command, whereas the more general
+ * device_add / device_del commands are now preferred.
+ *
+ * Copyright (c) 2004 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/hw.h"
+#include "hw/boards.h"
+#include "hw/pci/pci.h"
+#include "net/net.h"
+#include "hw/i386/pc.h"
+#include "monitor/monitor.h"
+#include "hw/scsi/scsi.h"
+#include "hw/virtio/virtio-blk.h"
+#include "qemu/config-file.h"
+#include "sysemu/blockdev.h"
+#include "qapi/error.h"
+
+static PCIDevice *qemu_pci_hot_add_nic(Monitor *mon,
+                                       const char *devaddr,
+                                       const char *opts_str)
+{
+    Error *local_err = NULL;
+    QemuOpts *opts;
+    PCIBus *bus;
+    int ret, devfn;
+
+    bus = pci_get_bus_devfn(&devfn, devaddr);
+    if (!bus) {
+        monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
+        return NULL;
+    }
+    if (!((BusState*)bus)->allow_hotplug) {
+        monitor_printf(mon, "PCI bus doesn't support hotplug\n");
+        return NULL;
+    }
+
+    opts = qemu_opts_parse(qemu_find_opts("net"), opts_str ? opts_str : "", 0);
+    if (!opts) {
+        return NULL;
+    }
+
+    qemu_opt_set(opts, "type", "nic");
+
+    ret = net_client_init(opts, 0, &local_err);
+    if (error_is_set(&local_err)) {
+        qerror_report_err(local_err);
+        error_free(local_err);
+        return NULL;
+    }
+    if (nd_table[ret].devaddr) {
+        monitor_printf(mon, "Parameter addr not supported\n");
+        return NULL;
+    }
+    return pci_nic_init(&nd_table[ret], "rtl8139", devaddr);
+}
+
+static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
+                        DriveInfo *dinfo, int printinfo)
+{
+    SCSIBus *scsibus;
+    SCSIDevice *scsidev;
+
+    scsibus = (SCSIBus *)
+        object_dynamic_cast(OBJECT(QLIST_FIRST(&adapter->child_bus)),
+                            TYPE_SCSI_BUS);
+    if (!scsibus) {
+	error_report("Device is not a SCSI adapter");
+	return -1;
+    }
+
+    /*
+     * drive_init() tries to find a default for dinfo->unit.  Doesn't
+     * work at all for hotplug though as we assign the device to a
+     * specific bus instead of the first bus with spare scsi ids.
+     *
+     * Ditch the calculated value and reload from option string (if
+     * specified).
+     */
+    dinfo->unit = qemu_opt_get_number(dinfo->opts, "unit", -1);
+    dinfo->bus = scsibus->busnr;
+    scsidev = scsi_bus_legacy_add_drive(scsibus, dinfo->bdrv, dinfo->unit,
+                                        false, -1, NULL);
+    if (!scsidev) {
+        return -1;
+    }
+    dinfo->unit = scsidev->id;
+
+    if (printinfo)
+        monitor_printf(mon, "OK bus %d, unit %d\n",
+                       scsibus->busnr, scsidev->id);
+    return 0;
+}
+
+int pci_drive_hot_add(Monitor *mon, const QDict *qdict, DriveInfo *dinfo)
+{
+    int dom, pci_bus;
+    unsigned slot;
+    PCIDevice *dev;
+    const char *pci_addr = qdict_get_str(qdict, "pci_addr");
+
+    switch (dinfo->type) {
+    case IF_SCSI:
+        if (pci_read_devaddr(mon, pci_addr, &dom, &pci_bus, &slot)) {
+            goto err;
+        }
+        dev = pci_find_device(pci_find_root_bus(dom), pci_bus,
+                              PCI_DEVFN(slot, 0));
+        if (!dev) {
+            monitor_printf(mon, "no pci device with address %s\n", pci_addr);
+            goto err;
+        }
+        if (scsi_hot_add(mon, &dev->qdev, dinfo, 1) != 0) {
+            goto err;
+        }
+        break;
+    default:
+        monitor_printf(mon, "Can't hot-add drive to type %d\n", dinfo->type);
+        goto err;
+    }
+
+    return 0;
+err:
+    return -1;
+}
+
+static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
+                                           const char *devaddr,
+                                           const char *opts)
+{
+    PCIDevice *dev;
+    DriveInfo *dinfo = NULL;
+    int type = -1;
+    char buf[128];
+    PCIBus *bus;
+    int devfn;
+
+    if (get_param_value(buf, sizeof(buf), "if", opts)) {
+        if (!strcmp(buf, "scsi"))
+            type = IF_SCSI;
+        else if (!strcmp(buf, "virtio")) {
+            type = IF_VIRTIO;
+        } else {
+            monitor_printf(mon, "type %s not a hotpluggable PCI device.\n", buf);
+            return NULL;
+        }
+    } else {
+        monitor_printf(mon, "no if= specified\n");
+        return NULL;
+    }
+
+    if (get_param_value(buf, sizeof(buf), "file", opts)) {
+        dinfo = add_init_drive(opts);
+        if (!dinfo)
+            return NULL;
+        if (dinfo->devaddr) {
+            monitor_printf(mon, "Parameter addr not supported\n");
+            return NULL;
+        }
+    } else {
+        dinfo = NULL;
+    }
+
+    bus = pci_get_bus_devfn(&devfn, devaddr);
+    if (!bus) {
+        monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
+        return NULL;
+    }
+    if (!((BusState*)bus)->allow_hotplug) {
+        monitor_printf(mon, "PCI bus doesn't support hotplug\n");
+        return NULL;
+    }
+
+    switch (type) {
+    case IF_SCSI:
+        dev = pci_create(bus, devfn, "lsi53c895a");
+        if (qdev_init(&dev->qdev) < 0)
+            dev = NULL;
+        if (dev && dinfo) {
+            if (scsi_hot_add(mon, &dev->qdev, dinfo, 0) != 0) {
+                qdev_unplug(&dev->qdev, NULL);
+                dev = NULL;
+            }
+        }
+        break;
+    case IF_VIRTIO:
+        if (!dinfo) {
+            monitor_printf(mon, "virtio requires a backing file/device.\n");
+            return NULL;
+        }
+        dev = pci_create(bus, devfn, "virtio-blk-pci");
+        if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
+            qdev_free(&dev->qdev);
+            dev = NULL;
+            break;
+        }
+        if (qdev_init(&dev->qdev) < 0)
+            dev = NULL;
+        break;
+    default:
+        dev = NULL;
+    }
+    return dev;
+}
+
+void pci_device_hot_add(Monitor *mon, const QDict *qdict)
+{
+    PCIDevice *dev = NULL;
+    const char *pci_addr = qdict_get_str(qdict, "pci_addr");
+    const char *type = qdict_get_str(qdict, "type");
+    const char *opts = qdict_get_try_str(qdict, "opts");
+
+    /* strip legacy tag */
+    if (!strncmp(pci_addr, "pci_addr=", 9)) {
+        pci_addr += 9;
+    }
+
+    if (!opts) {
+        opts = "";
+    }
+
+    if (!strcmp(pci_addr, "auto"))
+        pci_addr = NULL;
+
+    if (strcmp(type, "nic") == 0) {
+        dev = qemu_pci_hot_add_nic(mon, pci_addr, opts);
+    } else if (strcmp(type, "storage") == 0) {
+        dev = qemu_pci_hot_add_storage(mon, pci_addr, opts);
+    } else {
+        monitor_printf(mon, "invalid type: %s\n", type);
+    }
+
+    if (dev) {
+        monitor_printf(mon, "OK domain %d, bus %d, slot %d, function %d\n",
+                       pci_find_domain(dev->bus),
+                       pci_bus_num(dev->bus), PCI_SLOT(dev->devfn),
+                       PCI_FUNC(dev->devfn));
+    } else
+        monitor_printf(mon, "failed to add %s\n", opts);
+}
+
+static int pci_device_hot_remove(Monitor *mon, const char *pci_addr)
+{
+    PCIDevice *d;
+    int dom, bus;
+    unsigned slot;
+    Error *local_err = NULL;
+
+    if (pci_read_devaddr(mon, pci_addr, &dom, &bus, &slot)) {
+        return -1;
+    }
+
+    d = pci_find_device(pci_find_root_bus(dom), bus, PCI_DEVFN(slot, 0));
+    if (!d) {
+        monitor_printf(mon, "slot %d empty\n", slot);
+        return -1;
+    }
+
+    qdev_unplug(&d->qdev, &local_err);
+    if (error_is_set(&local_err)) {
+        monitor_printf(mon, "%s\n", error_get_pretty(local_err));
+        error_free(local_err);
+        return -1;
+    }
+
+    return 0;
+}
+
+void do_pci_device_hot_remove(Monitor *mon, const QDict *qdict)
+{
+    pci_device_hot_remove(mon, qdict_get_str(qdict, "pci_addr"));
+}