qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)

Add monitor command to hot-add PCI devices (nic and storage).
    
Syntax is:
    
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
    
It returns the domain, bus and slot for the newly added device on success.
    
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
    
Save QEMUMachine necessary for drive_init.
    
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 219 insertions, 0 deletions

diff --git a/hw/pci-hotplug.c b/hw/pci-hotplug.c
new file mode 100644
index 0000000000..628676444e
--- /dev/null
+++ b/hw/pci-hotplug.c
@@ -0,0 +1,219 @@
+/*
+ * QEMU PCI hotplug support
+ *
+ * Copyright (c) 2004 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw.h"
+#include "boards.h"
+#include "pci.h"
+#include "net.h"
+#include "sysemu.h"
+#include "pc.h"
+#include "console.h"
+#include "block_int.h"
+#include "virtio-blk.h"
+
+#if defined(TARGET_I386) || defined(TARGET_X86_64)
+static PCIDevice *qemu_pci_hot_add_nic(PCIBus *pci_bus, const char *opts)
+{
+    int ret;
+
+    ret = net_client_init ("nic", opts);
+    if (ret < 0 || !nd_table[ret].model)
+        return NULL;
+    return pci_nic_init (pci_bus, &nd_table[ret], -1, "rtl8139");
+}
+
+void drive_hot_add(const char *pci_addr, const char *opts)
+{
+    int dom, pci_bus;
+    unsigned slot;
+    int drive_idx, type, bus;
+    int success = 0;
+    PCIDevice *dev;
+
+    if (pci_read_devaddr(pci_addr, &dom, &pci_bus, &slot)) {
+        term_printf("Invalid pci address\n");
+        return;
+    }
+
+    dev = pci_find_device(pci_bus, slot, 0);
+    if (!dev) {
+        term_printf("no pci device with address %s\n", pci_addr);
+        return;
+    }
+
+    drive_idx = add_init_drive(opts);
+    if (drive_idx < 0)
+        return;
+    type = drives_table[drive_idx].type;
+    bus = drive_get_max_bus (type);
+
+    switch (type) {
+    case IF_SCSI:
+        success = 1;
+        lsi_scsi_attach (dev, drives_table[drive_idx].bdrv,
+                         drives_table[drive_idx].unit);
+        break;
+    default:
+        term_printf("Can't hot-add drive to type %d\n", type);
+    }
+
+    if (success)
+        term_printf("OK bus %d, unit %d\n", drives_table[drive_idx].bus,
+                                            drives_table[drive_idx].unit);
+    return;
+}
+
+static PCIDevice *qemu_pci_hot_add_storage(PCIBus *pci_bus, const char *opts)
+{
+    void *opaque = NULL;
+    int type = -1, drive_idx = -1;
+    char buf[128];
+
+    if (get_param_value(buf, sizeof(buf), "if", opts)) {
+        if (!strcmp(buf, "scsi"))
+            type = IF_SCSI;
+        else if (!strcmp(buf, "virtio")) {
+            type = IF_VIRTIO;
+        }
+    } else {
+        term_printf("no if= specified\n");
+        return NULL;
+    }
+
+    if (get_param_value(buf, sizeof(buf), "file", opts)) {
+        drive_idx = add_init_drive(opts);
+        if (drive_idx < 0)
+            return NULL;
+    } else if (type == IF_VIRTIO) {
+        term_printf("virtio requires a backing file/device.\n");
+        return NULL;
+    }
+
+    switch (type) {
+    case IF_SCSI:
+        opaque = lsi_scsi_init (pci_bus, -1);
+        if (opaque && drive_idx >= 0)
+            lsi_scsi_attach (opaque, drives_table[drive_idx].bdrv,
+                             drives_table[drive_idx].unit);
+        break;
+    case IF_VIRTIO:
+        opaque = virtio_blk_init (pci_bus, drives_table[drive_idx].bdrv);
+        break;
+    default:
+        term_printf ("type %s not a hotpluggable PCI device.\n", buf);
+    }
+
+    return opaque;
+}
+
+void pci_device_hot_add(const char *pci_addr, const char *type, const char *opts)
+{
+    PCIDevice *dev = NULL;
+    PCIBus *pci_bus;
+    int dom, bus;
+    unsigned slot;
+
+    if (pci_assign_devaddr(pci_addr, &dom, &bus, &slot)) {
+        term_printf("Invalid pci address\n");
+        return;
+    }
+
+    pci_bus = pci_find_bus(bus);
+    if (!pci_bus) {
+        term_printf("Can't find pci_bus %d\n", bus);
+        return;
+    }
+
+    if (strcmp(type, "nic") == 0)
+        dev = qemu_pci_hot_add_nic(pci_bus, opts);
+    else if (strcmp(type, "storage") == 0)
+        dev = qemu_pci_hot_add_storage(pci_bus, opts);
+    else
+        term_printf("invalid type: %s\n", type);
+
+    if (dev) {
+        qemu_system_device_hot_add(bus, PCI_SLOT(dev->devfn), 1);
+        term_printf("OK domain %d, bus %d, slot %d, function %d\n",
+                    0, pci_bus_num(dev->bus), PCI_SLOT(dev->devfn),
+                    PCI_FUNC(dev->devfn));
+    } else
+        term_printf("failed to add %s\n", opts);
+}
+#endif
+
+void pci_device_hot_remove(const char *pci_addr)
+{
+    PCIDevice *d;
+    int dom, bus;
+    unsigned slot;
+
+    if (pci_read_devaddr(pci_addr, &dom, &bus, &slot)) {
+        term_printf("Invalid pci address\n");
+        return;
+    }
+
+    d = pci_find_device(bus, slot, 0);
+    if (!d) {
+        term_printf("slot %d empty\n", slot);
+        return;
+    }
+
+    qemu_system_device_hot_add(bus, slot, 0);
+}
+
+static int pci_match_fn(void *dev_private, void *arg)
+{
+    PCIDevice *dev = dev_private;
+    PCIDevice *match = arg;
+
+    return (dev == match);
+}
+
+/*
+ * OS has executed _EJ0 method, we now can remove the device
+ */
+void pci_device_hot_remove_success(int pcibus, int slot)
+{
+    PCIDevice *d = pci_find_device(pcibus, slot, 0);
+    int class_code;
+
+    if (!d) {
+        term_printf("invalid slot %d\n", slot);
+        return;
+    }
+
+    class_code = d->config_read(d, PCI_CLASS_DEVICE+1, 1);
+
+    switch(class_code) {
+    case PCI_BASE_CLASS_STORAGE:
+        destroy_bdrvs(pci_match_fn, d);
+        break;
+    case PCI_BASE_CLASS_NETWORK:
+        destroy_nic(pci_match_fn, d);
+        break;
+    }
+
+    pci_unregister_device(d);
+}
+