aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-host
diff options
context:
space:
mode:
authorMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>2017-06-11 10:12:08 +0100
committerMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>2017-10-19 07:45:35 +0100
commit6864fa38972081833f79b39df74b9c08cc94f6cc (patch)
tree0b5596929c94d5da015ae73100310723017d5430 /hw/pci-host
parent861cd431c99e56ddb5953ca1da164a9c32b477ca (diff)
sun4u: update PCI topology to include simba PCI bridges
This patch updates the sun4u model to being much closer to a real Ultra 5 by moving devices behind the 2 simba PCI bridges (A and B) as found on real hardware. The most noticeable change introduced by this patchset is that in-built devices are no longer attached to the PCI root bus, but instead behind PCI bridge A. Along with this the interrupt routing is updated accordingly to match the official documentation. Since the existing code currently bypasses the PCI bridge interrupt swizzling, the interrupt mapping functions are reorganised so that pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is used by the PCI host bridge. Behind the sabre PCI host bridge, the PCI IO space now needs to be split into two separate halves at 0x8000000. Therefore we also setup a new PCI IO space region of increased size on the PCI host bridge and enable 32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI bridge B correctly. As part of this change we also combine the onboard sunhme NIC and the ebus into a single multi-function device as done on a real Ultra 5. For other NICs the existing behaviour is preserved, i.e. we initialise them and place them into the next free slot on PCI bus B. Finally we mark the physically unavailable slots (plus slot 0 in busA) as reserved to ensure that users can't plug devices into non-existent slots which will break interrupt routing. Note: since this commit changes PCI topology and interrupt routing, an updated openbios-sparc64 binary is included with this commit containing the associated changes to maintain bisectability. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Diffstat (limited to 'hw/pci-host')
-rw-r--r--hw/pci-host/apb.c47
1 files changed, 36 insertions, 11 deletions
diff --git a/hw/pci-host/apb.c b/hw/pci-host/apb.c
index 1edf57f600..64025cd8cc 100644
--- a/hw/pci-host/apb.c
+++ b/hw/pci-host/apb.c
@@ -599,16 +599,35 @@ static uint64_t apb_pci_config_read(void *opaque, hwaddr addr,
/* The APB host has an IRQ line for each IRQ line of each slot. */
static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
{
- return ((pci_dev->devfn & 0x18) >> 1) + irq_num;
+ /* Return the irq as swizzled by the PBM */
+ return irq_num;
}
static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
{
+ PBMPCIBridge *br = PBM_PCI_BRIDGE(pci_bridge_get_device(
+ PCI_BUS(qdev_get_parent_bus(DEVICE(pci_dev)))));
+
int bus_offset;
- if (pci_dev->devfn & 1)
- bus_offset = 16;
- else
- bus_offset = 0;
+ if (br->busA) {
+ bus_offset = 0x0;
+
+ /* The on-board devices have fixed (legacy) OBIO intnos */
+ switch (PCI_SLOT(pci_dev->devfn)) {
+ case 1:
+ /* Onboard NIC */
+ return 0x21;
+ case 3:
+ /* Onboard IDE */
+ return 0x20;
+
+ default:
+ /* Normal intno, fall through */
+ break;
+ }
+ } else {
+ bus_offset = 0x10;
+ }
return (bus_offset + (PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f;
}
@@ -669,6 +688,12 @@ static void apb_pci_bridge_realize(PCIDevice *dev, Error **errp)
PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
PCI_STATUS_DEVSEL_MEDIUM);
+ /* Allow 32-bit IO addresses */
+ pci_set_word(dev->config + PCI_IO_BASE, PCI_IO_RANGE_TYPE_32);
+ pci_set_word(dev->config + PCI_IO_LIMIT, PCI_IO_RANGE_TYPE_32);
+ pci_set_word(dev->wmask + PCI_IO_BASE_UPPER16, 0xffff);
+ pci_set_word(dev->wmask + PCI_IO_LIMIT_UPPER16, 0xffff);
+
pci_bridge_update_mappings(PCI_BRIDGE(br));
}
@@ -690,9 +715,9 @@ PCIBus *pci_apb_init(hwaddr special_base,
d = APB_DEVICE(dev);
phb = PCI_HOST_BRIDGE(dev);
phb->bus = pci_register_bus(DEVICE(phb), "pci",
- pci_apb_set_irq, pci_pbm_map_irq, d,
+ pci_apb_set_irq, pci_apb_map_irq, d,
&d->pci_mmio,
- get_system_io(),
+ &d->pci_ioport,
0, 32, TYPE_PCI_BUS);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
@@ -725,14 +750,14 @@ PCIBus *pci_apb_init(hwaddr special_base,
pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 0), true,
TYPE_PBM_PCI_BRIDGE);
br = PCI_BRIDGE(pci_dev);
- pci_bridge_map_irq(br, "pciB", pci_apb_map_irq);
+ pci_bridge_map_irq(br, "pciB", pci_pbm_map_irq);
qdev_init_nofail(&pci_dev->qdev);
*busB = pci_bridge_get_sec_bus(br);
pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 1), true,
TYPE_PBM_PCI_BRIDGE);
br = PCI_BRIDGE(pci_dev);
- pci_bridge_map_irq(br, "pciA", pci_apb_map_irq);
+ pci_bridge_map_irq(br, "pciA", pci_pbm_map_irq);
qdev_prop_set_bit(DEVICE(pci_dev), "busA", true);
qdev_init_nofail(&pci_dev->qdev);
*busA = pci_bridge_get_sec_bus(br);
@@ -798,8 +823,8 @@ static int pci_pbm_init_device(SysBusDevice *dev)
sysbus_init_mmio(dev, &s->pci_config);
/* pci_ioport */
- memory_region_init_alias(&s->pci_ioport, OBJECT(s), "apb-pci-ioport",
- get_system_io(), 0, 0x10000);
+ memory_region_init(&s->pci_ioport, OBJECT(s), "apb-pci-ioport", 0x1000000);
+
/* at region 2 */
sysbus_init_mmio(dev, &s->pci_ioport);