hw: move PCI bridges to hw/pci-* or hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 542 insertions, 0 deletions

diff --git a/hw/pci-host/apb.c b/hw/pci-host/apb.c
new file mode 100644
index 0000000000..b4981d7005
--- /dev/null
+++ b/hw/pci-host/apb.c
@@ -0,0 +1,542 @@
+/*
+ * QEMU Ultrasparc APB PCI host
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* XXX This file and most of its contents are somewhat misnamed.  The
+   Ultrasparc PCI host is called the PCI Bus Module (PBM).  The APB is
+   the secondary PCI bridge.  */
+
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci-host/apb.h"
+#include "sysemu/sysemu.h"
+#include "exec/address-spaces.h"
+
+/* debug APB */
+//#define DEBUG_APB
+
+#ifdef DEBUG_APB
+#define APB_DPRINTF(fmt, ...) \
+do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define APB_DPRINTF(fmt, ...)
+#endif
+
+/*
+ * Chipset docs:
+ * PBM: "UltraSPARC IIi User's Manual",
+ * http://www.sun.com/processors/manuals/805-0087.pdf
+ *
+ * APB: "Advanced PCI Bridge (APB) User's Manual",
+ * http://www.sun.com/processors/manuals/805-1251.pdf
+ */
+
+#define PBM_PCI_IMR_MASK    0x7fffffff
+#define PBM_PCI_IMR_ENABLED 0x80000000
+
+#define POR          (1 << 31)
+#define SOFT_POR     (1 << 30)
+#define SOFT_XIR     (1 << 29)
+#define BTN_POR      (1 << 28)
+#define BTN_XIR      (1 << 27)
+#define RESET_MASK   0xf8000000
+#define RESET_WCMASK 0x98000000
+#define RESET_WMASK  0x60000000
+
+#define MAX_IVEC 0x30
+
+typedef struct APBState {
+    SysBusDevice busdev;
+    PCIBus      *bus;
+    MemoryRegion apb_config;
+    MemoryRegion pci_config;
+    MemoryRegion pci_mmio;
+    MemoryRegion pci_ioport;
+    uint32_t iommu[4];
+    uint32_t pci_control[16];
+    uint32_t pci_irq_map[8];
+    uint32_t obio_irq_map[32];
+    qemu_irq *pbm_irqs;
+    qemu_irq *ivec_irqs;
+    uint32_t reset_control;
+    unsigned int nr_resets;
+} APBState;
+
+static void pci_apb_set_irq(void *opaque, int irq_num, int level);
+
+static void apb_config_writel (void *opaque, hwaddr addr,
+                               uint64_t val, unsigned size)
+{
+    APBState *s = opaque;
+
+    APB_DPRINTF("%s: addr " TARGET_FMT_plx " val %" PRIx64 "\n", __func__, addr, val);
+
+    switch (addr & 0xffff) {
+    case 0x30 ... 0x4f: /* DMA error registers */
+        /* XXX: not implemented yet */
+        break;
+    case 0x200 ... 0x20b: /* IOMMU */
+        s->iommu[(addr & 0xf) >> 2] = val;
+        break;
+    case 0x20c ... 0x3ff: /* IOMMU flush */
+        break;
+    case 0xc00 ... 0xc3f: /* PCI interrupt control */
+        if (addr & 4) {
+            s->pci_irq_map[(addr & 0x3f) >> 3] &= PBM_PCI_IMR_MASK;
+            s->pci_irq_map[(addr & 0x3f) >> 3] |= val & ~PBM_PCI_IMR_MASK;
+        }
+        break;
+    case 0x1000 ... 0x1080: /* OBIO interrupt control */
+        if (addr & 4) {
+            s->obio_irq_map[(addr & 0xff) >> 3] &= PBM_PCI_IMR_MASK;
+            s->obio_irq_map[(addr & 0xff) >> 3] |= val & ~PBM_PCI_IMR_MASK;
+        }
+        break;
+    case 0x1400 ... 0x143f: /* PCI interrupt clear */
+        if (addr & 4) {
+            pci_apb_set_irq(s, (addr & 0x3f) >> 3, 0);
+        }
+        break;
+    case 0x1800 ... 0x1860: /* OBIO interrupt clear */
+        if (addr & 4) {
+            pci_apb_set_irq(s, 0x20 | ((addr & 0xff) >> 3), 0);
+        }
+        break;
+    case 0x2000 ... 0x202f: /* PCI control */
+        s->pci_control[(addr & 0x3f) >> 2] = val;
+        break;
+    case 0xf020 ... 0xf027: /* Reset control */
+        if (addr & 4) {
+            val &= RESET_MASK;
+            s->reset_control &= ~(val & RESET_WCMASK);
+            s->reset_control |= val & RESET_WMASK;
+            if (val & SOFT_POR) {
+                s->nr_resets = 0;
+                qemu_system_reset_request();
+            } else if (val & SOFT_XIR) {
+                qemu_system_reset_request();
+            }
+        }
+        break;
+    case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
+    case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
+    case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
+    case 0xf000 ... 0xf01f: /* FFB config, memory control */
+        /* we don't care */
+    default:
+        break;
+    }
+}
+
+static uint64_t apb_config_readl (void *opaque,
+                                  hwaddr addr, unsigned size)
+{
+    APBState *s = opaque;
+    uint32_t val;
+
+    switch (addr & 0xffff) {
+    case 0x30 ... 0x4f: /* DMA error registers */
+        val = 0;
+        /* XXX: not implemented yet */
+        break;
+    case 0x200 ... 0x20b: /* IOMMU */
+        val = s->iommu[(addr & 0xf) >> 2];
+        break;
+    case 0x20c ... 0x3ff: /* IOMMU flush */
+        val = 0;
+        break;
+    case 0xc00 ... 0xc3f: /* PCI interrupt control */
+        if (addr & 4) {
+            val = s->pci_irq_map[(addr & 0x3f) >> 3];
+        } else {
+            val = 0;
+        }
+        break;
+    case 0x1000 ... 0x1080: /* OBIO interrupt control */
+        if (addr & 4) {
+            val = s->obio_irq_map[(addr & 0xff) >> 3];
+        } else {
+            val = 0;
+        }
+        break;
+    case 0x2000 ... 0x202f: /* PCI control */
+        val = s->pci_control[(addr & 0x3f) >> 2];
+        break;
+    case 0xf020 ... 0xf027: /* Reset control */
+        if (addr & 4) {
+            val = s->reset_control;
+        } else {
+            val = 0;
+        }
+        break;
+    case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
+    case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
+    case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
+    case 0xf000 ... 0xf01f: /* FFB config, memory control */
+        /* we don't care */
+    default:
+        val = 0;
+        break;
+    }
+    APB_DPRINTF("%s: addr " TARGET_FMT_plx " -> %x\n", __func__, addr, val);
+
+    return val;
+}
+
+static const MemoryRegionOps apb_config_ops = {
+    .read = apb_config_readl,
+    .write = apb_config_writel,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void apb_pci_config_write(void *opaque, hwaddr addr,
+                                 uint64_t val, unsigned size)
+{
+    APBState *s = opaque;
+
+    val = qemu_bswap_len(val, size);
+    APB_DPRINTF("%s: addr " TARGET_FMT_plx " val %" PRIx64 "\n", __func__, addr, val);
+    pci_data_write(s->bus, addr, val, size);
+}
+
+static uint64_t apb_pci_config_read(void *opaque, hwaddr addr,
+                                    unsigned size)
+{
+    uint32_t ret;
+    APBState *s = opaque;
+
+    ret = pci_data_read(s->bus, addr, size);
+    ret = qemu_bswap_len(ret, size);
+    APB_DPRINTF("%s: addr " TARGET_FMT_plx " -> %x\n", __func__, addr, ret);
+    return ret;
+}
+
+static void pci_apb_iowriteb (void *opaque, hwaddr addr,
+                                  uint32_t val)
+{
+    cpu_outb(addr & IOPORTS_MASK, val);
+}
+
+static void pci_apb_iowritew (void *opaque, hwaddr addr,
+                                  uint32_t val)
+{
+    cpu_outw(addr & IOPORTS_MASK, bswap16(val));
+}
+
+static void pci_apb_iowritel (void *opaque, hwaddr addr,
+                                uint32_t val)
+{
+    cpu_outl(addr & IOPORTS_MASK, bswap32(val));
+}
+
+static uint32_t pci_apb_ioreadb (void *opaque, hwaddr addr)
+{
+    uint32_t val;
+
+    val = cpu_inb(addr & IOPORTS_MASK);
+    return val;
+}
+
+static uint32_t pci_apb_ioreadw (void *opaque, hwaddr addr)
+{
+    uint32_t val;
+
+    val = bswap16(cpu_inw(addr & IOPORTS_MASK));
+    return val;
+}
+
+static uint32_t pci_apb_ioreadl (void *opaque, hwaddr addr)
+{
+    uint32_t val;
+
+    val = bswap32(cpu_inl(addr & IOPORTS_MASK));
+    return val;
+}
+
+static const MemoryRegionOps pci_ioport_ops = {
+    .old_mmio = {
+        .read = { pci_apb_ioreadb, pci_apb_ioreadw, pci_apb_ioreadl },
+        .write = { pci_apb_iowriteb, pci_apb_iowritew, pci_apb_iowritel, },
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+/* The APB host has an IRQ line for each IRQ line of each slot.  */
+static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
+{
+    return ((pci_dev->devfn & 0x18) >> 1) + irq_num;
+}
+
+static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
+{
+    int bus_offset;
+    if (pci_dev->devfn & 1)
+        bus_offset = 16;
+    else
+        bus_offset = 0;
+    return bus_offset + irq_num;
+}
+
+static void pci_apb_set_irq(void *opaque, int irq_num, int level)
+{
+    APBState *s = opaque;
+
+    /* PCI IRQ map onto the first 32 INO.  */
+    if (irq_num < 32) {
+        if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) {
+            APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level);
+            qemu_set_irq(s->ivec_irqs[irq_num], level);
+        } else {
+            APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num);
+            qemu_irq_lower(s->ivec_irqs[irq_num]);
+        }
+    } else {
+        /* OBIO IRQ map onto the next 16 INO.  */
+        if (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED) {
+            APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level);
+            qemu_set_irq(s->ivec_irqs[irq_num], level);
+        } else {
+            APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num);
+            qemu_irq_lower(s->ivec_irqs[irq_num]);
+        }
+    }
+}
+
+static int apb_pci_bridge_initfn(PCIDevice *dev)
+{
+    int rc;
+
+    rc = pci_bridge_initfn(dev, TYPE_PCI_BUS);
+    if (rc < 0) {
+        return rc;
+    }
+
+    /*
+     * command register:
+     * According to PCI bridge spec, after reset
+     *   bus master bit is off
+     *   memory space enable bit is off
+     * According to manual (805-1251.pdf).
+     *   the reset value should be zero unless the boot pin is tied high
+     *   (which is true) and thus it should be PCI_COMMAND_MEMORY.
+     */
+    pci_set_word(dev->config + PCI_COMMAND,
+                 PCI_COMMAND_MEMORY);
+    pci_set_word(dev->config + PCI_STATUS,
+                 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
+                 PCI_STATUS_DEVSEL_MEDIUM);
+    return 0;
+}
+
+PCIBus *pci_apb_init(hwaddr special_base,
+                     hwaddr mem_base,
+                     qemu_irq *ivec_irqs, PCIBus **bus2, PCIBus **bus3,
+                     qemu_irq **pbm_irqs)
+{
+    DeviceState *dev;
+    SysBusDevice *s;
+    APBState *d;
+    PCIDevice *pci_dev;
+    PCIBridge *br;
+
+    /* Ultrasparc PBM main bus */
+    dev = qdev_create(NULL, "pbm");
+    qdev_init_nofail(dev);
+    s = SYS_BUS_DEVICE(dev);
+    /* apb_config */
+    sysbus_mmio_map(s, 0, special_base);
+    /* PCI configuration space */
+    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
+    /* pci_ioport */
+    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
+    d = FROM_SYSBUS(APBState, s);
+
+    memory_region_init(&d->pci_mmio, "pci-mmio", 0x100000000ULL);
+    memory_region_add_subregion(get_system_memory(), mem_base, &d->pci_mmio);
+
+    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
+                              pci_apb_set_irq, pci_pbm_map_irq, d,
+                              &d->pci_mmio,
+                              get_system_io(),
+                              0, 32, TYPE_PCI_BUS);
+
+    *pbm_irqs = d->pbm_irqs;
+    d->ivec_irqs = ivec_irqs;
+
+    pci_create_simple(d->bus, 0, "pbm-pci");
+
+    /* APB secondary busses */
+    pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 0), true,
+                                   "pbm-bridge");
+    br = DO_UPCAST(PCIBridge, dev, pci_dev);
+    pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 1",
+                       pci_apb_map_irq);
+    qdev_init_nofail(&pci_dev->qdev);
+    *bus2 = pci_bridge_get_sec_bus(br);
+
+    pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 1), true,
+                                   "pbm-bridge");
+    br = DO_UPCAST(PCIBridge, dev, pci_dev);
+    pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 2",
+                       pci_apb_map_irq);
+    qdev_init_nofail(&pci_dev->qdev);
+    *bus3 = pci_bridge_get_sec_bus(br);
+
+    return d->bus;
+}
+
+static void pci_pbm_reset(DeviceState *d)
+{
+    unsigned int i;
+    APBState *s = container_of(d, APBState, busdev.qdev);
+
+    for (i = 0; i < 8; i++) {
+        s->pci_irq_map[i] &= PBM_PCI_IMR_MASK;
+    }
+    for (i = 0; i < 32; i++) {
+        s->obio_irq_map[i] &= PBM_PCI_IMR_MASK;
+    }
+
+    if (s->nr_resets++ == 0) {
+        /* Power on reset */
+        s->reset_control = POR;
+    }
+}
+
+static const MemoryRegionOps pci_config_ops = {
+    .read = apb_pci_config_read,
+    .write = apb_pci_config_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int pci_pbm_init_device(SysBusDevice *dev)
+{
+    APBState *s;
+    unsigned int i;
+
+    s = FROM_SYSBUS(APBState, dev);
+    for (i = 0; i < 8; i++) {
+        s->pci_irq_map[i] = (0x1f << 6) | (i << 2);
+    }
+    for (i = 0; i < 32; i++) {
+        s->obio_irq_map[i] = ((0x1f << 6) | 0x20) + i;
+    }
+    s->pbm_irqs = qemu_allocate_irqs(pci_apb_set_irq, s, MAX_IVEC);
+
+    /* apb_config */
+    memory_region_init_io(&s->apb_config, &apb_config_ops, s, "apb-config",
+                          0x10000);
+    /* at region 0 */
+    sysbus_init_mmio(dev, &s->apb_config);
+
+    memory_region_init_io(&s->pci_config, &pci_config_ops, s, "apb-pci-config",
+                          0x1000000);
+    /* at region 1 */
+    sysbus_init_mmio(dev, &s->pci_config);
+
+    /* pci_ioport */
+    memory_region_init_io(&s->pci_ioport, &pci_ioport_ops, s,
+                          "apb-pci-ioport", 0x10000);
+    /* at region 2 */
+    sysbus_init_mmio(dev, &s->pci_ioport);
+
+    return 0;
+}
+
+static int pbm_pci_host_init(PCIDevice *d)
+{
+    pci_set_word(d->config + PCI_COMMAND,
+                 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+    pci_set_word(d->config + PCI_STATUS,
+                 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
+                 PCI_STATUS_DEVSEL_MEDIUM);
+    return 0;
+}
+
+static void pbm_pci_host_class_init(ObjectClass *klass, void *data)
+{
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->init = pbm_pci_host_init;
+    k->vendor_id = PCI_VENDOR_ID_SUN;
+    k->device_id = PCI_DEVICE_ID_SUN_SABRE;
+    k->class_id = PCI_CLASS_BRIDGE_HOST;
+}
+
+static const TypeInfo pbm_pci_host_info = {
+    .name          = "pbm-pci",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCIDevice),
+    .class_init    = pbm_pci_host_class_init,
+};
+
+static void pbm_host_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = pci_pbm_init_device;
+    dc->reset = pci_pbm_reset;
+}
+
+static const TypeInfo pbm_host_info = {
+    .name          = "pbm",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(APBState),
+    .class_init    = pbm_host_class_init,
+};
+
+static void pbm_pci_bridge_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->init = apb_pci_bridge_initfn;
+    k->exit = pci_bridge_exitfn;
+    k->vendor_id = PCI_VENDOR_ID_SUN;
+    k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
+    k->revision = 0x11;
+    k->config_write = pci_bridge_write_config;
+    k->is_bridge = 1;
+    dc->reset = pci_bridge_reset;
+    dc->vmsd = &vmstate_pci_device;
+}
+
+static const TypeInfo pbm_pci_bridge_info = {
+    .name          = "pbm-bridge",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCIBridge),
+    .class_init    = pbm_pci_bridge_class_init,
+};
+
+static void pbm_register_types(void)
+{
+    type_register_static(&pbm_host_info);
+    type_register_static(&pbm_pci_host_info);
+    type_register_static(&pbm_pci_bridge_info);
+}
+
+type_init(pbm_register_types)