pc: Fix CMOS info for drives defined with -device

Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

1 files changed, 59 insertions, 35 deletions

diff --git a/hw/pc.c b/hw/pc.c
index 25ebafac80..b577fb1bc6 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -25,6 +25,7 @@
 #include "pc.h"
 #include "apic.h"
 #include "fdc.h"
+#include "ide.h"
 #include "pci.h"
 #include "vmware_vga.h"
 #include "monitor.h"
@@ -275,14 +276,65 @@ static int pc_boot_set(void *opaque, const char *boot_device)
     return set_boot_dev(opaque, boot_device, 0);
 }
 
-/* hd_table must contain 4 block drivers */
+typedef struct pc_cmos_init_late_arg {
+    ISADevice *rtc_state;
+    BusState *idebus0, *idebus1;
+} pc_cmos_init_late_arg;
+
+static void pc_cmos_init_late(void *opaque)
+{
+    pc_cmos_init_late_arg *arg = opaque;
+    ISADevice *s = arg->rtc_state;
+    int val;
+    BlockDriverState *hd_table[4];
+    int i;
+
+    ide_get_bs(hd_table, arg->idebus0);
+    ide_get_bs(hd_table + 2, arg->idebus1);
+
+    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
+    if (hd_table[0])
+        cmos_init_hd(0x19, 0x1b, hd_table[0], s);
+    if (hd_table[1])
+        cmos_init_hd(0x1a, 0x24, hd_table[1], s);
+
+    val = 0;
+    for (i = 0; i < 4; i++) {
+        if (hd_table[i]) {
+            int cylinders, heads, sectors, translation;
+            /* NOTE: bdrv_get_geometry_hint() returns the physical
+                geometry.  It is always such that: 1 <= sects <= 63, 1
+                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
+                geometry can be different if a translation is done. */
+            translation = bdrv_get_translation_hint(hd_table[i]);
+            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
+                bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
+                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
+                    /* No translation. */
+                    translation = 0;
+                } else {
+                    /* LBA translation. */
+                    translation = 1;
+                }
+            } else {
+                translation--;
+            }
+            val |= translation << (i * 2);
+        }
+    }
+    rtc_set_memory(s, 0x39, val);
+
+    qemu_unregister_reset(pc_cmos_init_late, opaque);
+}
+
 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
-                  const char *boot_device, DriveInfo **hd_table,
+                  const char *boot_device,
+                  BusState *idebus0, BusState *idebus1,
                   FDCtrl *floppy_controller, ISADevice *s)
 {
     int val;
     int fd0, fd1, nb;
-    int i;
+    static pc_cmos_init_late_arg arg;
 
     /* various important CMOS locations needed by PC/Bochs bios */
 
@@ -351,38 +403,10 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
     rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
 
     /* hard drives */
-
-    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
-    if (hd_table[0])
-        cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv, s);
-    if (hd_table[1])
-        cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv, s);
-
-    val = 0;
-    for (i = 0; i < 4; i++) {
-        if (hd_table[i]) {
-            int cylinders, heads, sectors, translation;
-            /* NOTE: bdrv_get_geometry_hint() returns the physical
-                geometry.  It is always such that: 1 <= sects <= 63, 1
-                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
-                geometry can be different if a translation is done. */
-            translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
-            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
-                bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
-                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
-                    /* No translation. */
-                    translation = 0;
-                } else {
-                    /* LBA translation. */
-                    translation = 1;
-                }
-            } else {
-                translation--;
-            }
-            val |= translation << (i * 2);
-        }
-    }
-    rtc_set_memory(s, 0x39, val);
+    arg.rtc_state = s;
+    arg.idebus0 = idebus0;
+    arg.idebus1 = idebus1;
+    qemu_register_reset(pc_cmos_init_late, &arg);
 }
 
 static void handle_a20_line_change(void *opaque, int irq, int level)