hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 291 deletions

diff --git a/hw/palm.c b/hw/palm.c
deleted file mode 100644
index 91bc74af24..0000000000
--- a/hw/palm.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * PalmOne's (TM) PDAs.
- *
- * Copyright (C) 2006-2007 Andrzej Zaborowski  <balrog@zabor.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#include "hw/hw.h"
-#include "audio/audio.h"
-#include "sysemu/sysemu.h"
-#include "ui/console.h"
-#include "hw/omap.h"
-#include "hw/boards.h"
-#include "hw/arm-misc.h"
-#include "hw/devices.h"
-#include "hw/loader.h"
-#include "exec/address-spaces.h"
-
-static uint32_t static_readb(void *opaque, hwaddr offset)
-{
-    uint32_t *val = (uint32_t *) opaque;
-    return *val >> ((offset & 3) << 3);
-}
-
-static uint32_t static_readh(void *opaque, hwaddr offset)
-{
-    uint32_t *val = (uint32_t *) opaque;
-    return *val >> ((offset & 1) << 3);
-}
-
-static uint32_t static_readw(void *opaque, hwaddr offset)
-{
-    uint32_t *val = (uint32_t *) opaque;
-    return *val >> ((offset & 0) << 3);
-}
-
-static void static_write(void *opaque, hwaddr offset,
-                uint32_t value)
-{
-#ifdef SPY
-    printf("%s: value %08lx written at " PA_FMT "\n",
-                    __FUNCTION__, value, offset);
-#endif
-}
-
-static const MemoryRegionOps static_ops = {
-    .old_mmio = {
-        .read = { static_readb, static_readh, static_readw, },
-        .write = { static_write, static_write, static_write, },
-    },
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-/* Palm Tunsgten|E support */
-
-/* Shared GPIOs */
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-/* MPU private GPIOs */
-#define PALMTE_DC_GPIO		2
-#define PALMTE_MMC_SWITCH_GPIO	4
-#define PALMTE_MMC1_GPIO	6
-#define PALMTE_MMC2_GPIO	7
-#define PALMTE_MMC3_GPIO	11
-
-static MouseTransformInfo palmte_pointercal = {
-    .x = 320,
-    .y = 320,
-    .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
-};
-
-static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
-{
-    uWireSlave *tsc;
-
-    tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO));
-
-    omap_uwire_attach(cpu->microwire, tsc, 0);
-    omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
-
-    tsc210x_set_transform(tsc, &palmte_pointercal);
-}
-
-static struct {
-    int row;
-    int column;
-} palmte_keymap[0x80] = {
-    [0 ... 0x7f] = { -1, -1 },
-    [0x3b] = { 0, 0 },	/* F1	-> Calendar */
-    [0x3c] = { 1, 0 },	/* F2	-> Contacts */
-    [0x3d] = { 2, 0 },	/* F3	-> Tasks List */
-    [0x3e] = { 3, 0 },	/* F4	-> Note Pad */
-    [0x01] = { 4, 0 },	/* Esc	-> Power */
-    [0x4b] = { 0, 1 },	/* 	   Left */
-    [0x50] = { 1, 1 },	/* 	   Down */
-    [0x48] = { 2, 1 },	/*	   Up */
-    [0x4d] = { 3, 1 },	/*	   Right */
-    [0x4c] = { 4, 1 },	/* 	   Centre */
-    [0x39] = { 4, 1 },	/* Spc	-> Centre */
-};
-
-static void palmte_button_event(void *opaque, int keycode)
-{
-    struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;
-
-    if (palmte_keymap[keycode & 0x7f].row != -1)
-        omap_mpuio_key(cpu->mpuio,
-                        palmte_keymap[keycode & 0x7f].row,
-                        palmte_keymap[keycode & 0x7f].column,
-                        !(keycode & 0x80));
-}
-
-static void palmte_onoff_gpios(void *opaque, int line, int level)
-{
-    switch (line) {
-    case 0:
-        printf("%s: current to MMC/SD card %sabled.\n",
-                        __FUNCTION__, level ? "dis" : "en");
-        break;
-    case 1:
-        printf("%s: internal speaker amplifier %s.\n",
-                        __FUNCTION__, level ? "down" : "on");
-        break;
-
-    /* These LCD & Audio output signals have not been identified yet.  */
-    case 2:
-    case 3:
-    case 4:
-        printf("%s: LCD GPIO%i %s.\n",
-                        __FUNCTION__, line - 1, level ? "high" : "low");
-        break;
-    case 5:
-    case 6:
-        printf("%s: Audio GPIO%i %s.\n",
-                        __FUNCTION__, line - 4, level ? "high" : "low");
-        break;
-    }
-}
-
-static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
-{
-    qemu_irq *misc_gpio;
-
-    omap_mmc_handlers(cpu->mmc,
-                    qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO),
-                    qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
-                            [PALMTE_MMC_SWITCH_GPIO]));
-
-    misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
-    qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO,	misc_gpio[0]);
-    qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO,	misc_gpio[1]);
-    qdev_connect_gpio_out(cpu->gpio, 11,			misc_gpio[2]);
-    qdev_connect_gpio_out(cpu->gpio, 12,			misc_gpio[3]);
-    qdev_connect_gpio_out(cpu->gpio, 13,			misc_gpio[4]);
-    omap_mpuio_out_set(cpu->mpuio, 1,				misc_gpio[5]);
-    omap_mpuio_out_set(cpu->mpuio, 3,				misc_gpio[6]);
-
-    /* Reset some inputs to initial state.  */
-    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
-    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO));
-    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4));
-    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO));
-    qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
-    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
-    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
-    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
-}
-
-static struct arm_boot_info palmte_binfo = {
-    .loader_start = OMAP_EMIFF_BASE,
-    .ram_size = 0x02000000,
-    .board_id = 0x331,
-};
-
-static void palmte_init(QEMUMachineInitArgs *args)
-{
-    const char *cpu_model = args->cpu_model;
-    const char *kernel_filename = args->kernel_filename;
-    const char *kernel_cmdline = args->kernel_cmdline;
-    const char *initrd_filename = args->initrd_filename;
-    MemoryRegion *address_space_mem = get_system_memory();
-    struct omap_mpu_state_s *mpu;
-    int flash_size = 0x00800000;
-    int sdram_size = palmte_binfo.ram_size;
-    static uint32_t cs0val = 0xffffffff;
-    static uint32_t cs1val = 0x0000e1a0;
-    static uint32_t cs2val = 0x0000e1a0;
-    static uint32_t cs3val = 0xe1a0e1a0;
-    int rom_size, rom_loaded = 0;
-    DisplayState *ds = get_displaystate();
-    MemoryRegion *flash = g_new(MemoryRegion, 1);
-    MemoryRegion *cs = g_new(MemoryRegion, 4);
-
-    mpu = omap310_mpu_init(address_space_mem, sdram_size, cpu_model);
-
-    /* External Flash (EMIFS) */
-    memory_region_init_ram(flash, "palmte.flash", flash_size);
-    vmstate_register_ram_global(flash);
-    memory_region_set_readonly(flash, true);
-    memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash);
-
-    memory_region_init_io(&cs[0], &static_ops, &cs0val, "palmte-cs0",
-                          OMAP_CS0_SIZE - flash_size);
-    memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size,
-                                &cs[0]);
-    memory_region_init_io(&cs[1], &static_ops, &cs1val, "palmte-cs1",
-                          OMAP_CS1_SIZE);
-    memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]);
-    memory_region_init_io(&cs[2], &static_ops, &cs2val, "palmte-cs2",
-                          OMAP_CS2_SIZE);
-    memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]);
-    memory_region_init_io(&cs[3], &static_ops, &cs3val, "palmte-cs3",
-                          OMAP_CS3_SIZE);
-    memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]);
-
-    palmte_microwire_setup(mpu);
-
-    qemu_add_kbd_event_handler(palmte_button_event, mpu);
-
-    palmte_gpio_setup(mpu);
-
-    /* Setup initial (reset) machine state */
-    if (nb_option_roms) {
-        rom_size = get_image_size(option_rom[0].name);
-        if (rom_size > flash_size) {
-            fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
-                            __FUNCTION__, rom_size, flash_size);
-            rom_size = 0;
-        }
-        if (rom_size > 0) {
-            rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE,
-                                           flash_size);
-            rom_loaded = 1;
-        }
-        if (rom_size < 0) {
-            fprintf(stderr, "%s: error loading '%s'\n",
-                            __FUNCTION__, option_rom[0].name);
-        }
-    }
-
-    if (!rom_loaded && !kernel_filename) {
-        fprintf(stderr, "Kernel or ROM image must be specified\n");
-        exit(1);
-    }
-
-    /* Load the kernel.  */
-    if (kernel_filename) {
-        palmte_binfo.kernel_filename = kernel_filename;
-        palmte_binfo.kernel_cmdline = kernel_cmdline;
-        palmte_binfo.initrd_filename = initrd_filename;
-        arm_load_kernel(mpu->cpu, &palmte_binfo);
-    }
-
-    /* FIXME: We shouldn't really be doing this here.  The LCD controller
-       will set the size once configured, so this just sets an initial
-       size until the guest activates the display.  */
-    ds->surface = qemu_resize_displaysurface(ds, 320, 320);
-    dpy_gfx_resize(ds);
-}
-
-static QEMUMachine palmte_machine = {
-    .name = "cheetah",
-    .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
-    .init = palmte_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static void palmte_machine_init(void)
-{
-    qemu_register_machine(&palmte_machine);
-}
-
-machine_init(palmte_machine_init);