hw: move other devices to hw/misc/, configure with default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 263 deletions

diff --git a/hw/mst_fpga.c b/hw/mst_fpga.c
deleted file mode 100644
index 1dd15054d0..0000000000
--- a/hw/mst_fpga.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * PXA270-based Intel Mainstone platforms.
- * FPGA driver
- *
- * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
- *                                    <akuster@mvista.com>
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-#include "hw/hw.h"
-#include "hw/sysbus.h"
-
-/* Mainstone FPGA for extern irqs */
-#define FPGA_GPIO_PIN	0
-#define MST_NUM_IRQS	16
-#define MST_LEDDAT1		0x10
-#define MST_LEDDAT2		0x14
-#define MST_LEDCTRL		0x40
-#define MST_GPSWR		0x60
-#define MST_MSCWR1		0x80
-#define MST_MSCWR2		0x84
-#define MST_MSCWR3		0x88
-#define MST_MSCRD		0x90
-#define MST_INTMSKENA	0xc0
-#define MST_INTSETCLR	0xd0
-#define MST_PCMCIA0		0xe0
-#define MST_PCMCIA1		0xe4
-
-#define MST_PCMCIAx_READY	(1 << 10)
-#define MST_PCMCIAx_nCD		(1 << 5)
-
-#define MST_PCMCIA_CD0_IRQ	9
-#define MST_PCMCIA_CD1_IRQ	13
-
-typedef struct mst_irq_state{
-	SysBusDevice busdev;
-	MemoryRegion iomem;
-
-	qemu_irq parent;
-
-	uint32_t prev_level;
-	uint32_t leddat1;
-	uint32_t leddat2;
-	uint32_t ledctrl;
-	uint32_t gpswr;
-	uint32_t mscwr1;
-	uint32_t mscwr2;
-	uint32_t mscwr3;
-	uint32_t mscrd;
-	uint32_t intmskena;
-	uint32_t intsetclr;
-	uint32_t pcmcia0;
-	uint32_t pcmcia1;
-}mst_irq_state;
-
-static void
-mst_fpga_set_irq(void *opaque, int irq, int level)
-{
-	mst_irq_state *s = (mst_irq_state *)opaque;
-	uint32_t oldint = s->intsetclr & s->intmskena;
-
-	if (level)
-		s->prev_level |= 1u << irq;
-	else
-		s->prev_level &= ~(1u << irq);
-
-	switch(irq) {
-	case MST_PCMCIA_CD0_IRQ:
-		if (level)
-			s->pcmcia0 &= ~MST_PCMCIAx_nCD;
-		else
-			s->pcmcia0 |=  MST_PCMCIAx_nCD;
-		break;
-	case MST_PCMCIA_CD1_IRQ:
-		if (level)
-			s->pcmcia1 &= ~MST_PCMCIAx_nCD;
-		else
-			s->pcmcia1 |=  MST_PCMCIAx_nCD;
-		break;
-	}
-
-	if ((s->intmskena & (1u << irq)) && level)
-		s->intsetclr |= 1u << irq;
-
-	if (oldint != (s->intsetclr & s->intmskena))
-		qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
-}
-
-
-static uint64_t
-mst_fpga_readb(void *opaque, hwaddr addr, unsigned size)
-{
-	mst_irq_state *s = (mst_irq_state *) opaque;
-
-	switch (addr) {
-	case MST_LEDDAT1:
-		return s->leddat1;
-	case MST_LEDDAT2:
-		return s->leddat2;
-	case MST_LEDCTRL:
-		return s->ledctrl;
-	case MST_GPSWR:
-		return s->gpswr;
-	case MST_MSCWR1:
-		return s->mscwr1;
-	case MST_MSCWR2:
-		return s->mscwr2;
-	case MST_MSCWR3:
-		return s->mscwr3;
-	case MST_MSCRD:
-		return s->mscrd;
-	case MST_INTMSKENA:
-		return s->intmskena;
-	case MST_INTSETCLR:
-		return s->intsetclr;
-	case MST_PCMCIA0:
-		return s->pcmcia0;
-	case MST_PCMCIA1:
-		return s->pcmcia1;
-	default:
-		printf("Mainstone - mst_fpga_readb: Bad register offset "
-			"0x" TARGET_FMT_plx "\n", addr);
-	}
-	return 0;
-}
-
-static void
-mst_fpga_writeb(void *opaque, hwaddr addr, uint64_t value,
-		unsigned size)
-{
-	mst_irq_state *s = (mst_irq_state *) opaque;
-	value &= 0xffffffff;
-
-	switch (addr) {
-	case MST_LEDDAT1:
-		s->leddat1 = value;
-		break;
-	case MST_LEDDAT2:
-		s->leddat2 = value;
-		break;
-	case MST_LEDCTRL:
-		s->ledctrl = value;
-		break;
-	case MST_GPSWR:
-		s->gpswr = value;
-		break;
-	case MST_MSCWR1:
-		s->mscwr1 = value;
-		break;
-	case MST_MSCWR2:
-		s->mscwr2 = value;
-		break;
-	case MST_MSCWR3:
-		s->mscwr3 = value;
-		break;
-	case MST_MSCRD:
-		s->mscrd =  value;
-		break;
-	case MST_INTMSKENA:	/* Mask interrupt */
-		s->intmskena = (value & 0xFEEFF);
-		qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
-		break;
-	case MST_INTSETCLR:	/* clear or set interrupt */
-		s->intsetclr = (value & 0xFEEFF);
-		qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
-		break;
-		/* For PCMCIAx allow the to change only power and reset */
-	case MST_PCMCIA0:
-		s->pcmcia0 = (value & 0x1f) | (s->pcmcia0 & ~0x1f);
-		break;
-	case MST_PCMCIA1:
-		s->pcmcia1 = (value & 0x1f) | (s->pcmcia1 & ~0x1f);
-		break;
-	default:
-		printf("Mainstone - mst_fpga_writeb: Bad register offset "
-			"0x" TARGET_FMT_plx "\n", addr);
-	}
-}
-
-static const MemoryRegionOps mst_fpga_ops = {
-	.read = mst_fpga_readb,
-	.write = mst_fpga_writeb,
-	.endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int mst_fpga_post_load(void *opaque, int version_id)
-{
-	mst_irq_state *s = (mst_irq_state *) opaque;
-
-	qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
-	return 0;
-}
-
-static int mst_fpga_init(SysBusDevice *dev)
-{
-	mst_irq_state *s;
-
-	s = FROM_SYSBUS(mst_irq_state, dev);
-
-	s->pcmcia0 = MST_PCMCIAx_READY | MST_PCMCIAx_nCD;
-	s->pcmcia1 = MST_PCMCIAx_READY | MST_PCMCIAx_nCD;
-
-	sysbus_init_irq(dev, &s->parent);
-
-	/* alloc the external 16 irqs */
-	qdev_init_gpio_in(&dev->qdev, mst_fpga_set_irq, MST_NUM_IRQS);
-
-	memory_region_init_io(&s->iomem, &mst_fpga_ops, s,
-			    "fpga", 0x00100000);
-	sysbus_init_mmio(dev, &s->iomem);
-	return 0;
-}
-
-static VMStateDescription vmstate_mst_fpga_regs = {
-	.name = "mainstone_fpga",
-	.version_id = 0,
-	.minimum_version_id = 0,
-	.minimum_version_id_old = 0,
-	.post_load = mst_fpga_post_load,
-	.fields = (VMStateField []) {
-		VMSTATE_UINT32(prev_level, mst_irq_state),
-		VMSTATE_UINT32(leddat1, mst_irq_state),
-		VMSTATE_UINT32(leddat2, mst_irq_state),
-		VMSTATE_UINT32(ledctrl, mst_irq_state),
-		VMSTATE_UINT32(gpswr, mst_irq_state),
-		VMSTATE_UINT32(mscwr1, mst_irq_state),
-		VMSTATE_UINT32(mscwr2, mst_irq_state),
-		VMSTATE_UINT32(mscwr3, mst_irq_state),
-		VMSTATE_UINT32(mscrd, mst_irq_state),
-		VMSTATE_UINT32(intmskena, mst_irq_state),
-		VMSTATE_UINT32(intsetclr, mst_irq_state),
-		VMSTATE_UINT32(pcmcia0, mst_irq_state),
-		VMSTATE_UINT32(pcmcia1, mst_irq_state),
-		VMSTATE_END_OF_LIST(),
-	},
-};
-
-static void mst_fpga_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = mst_fpga_init;
-    dc->desc = "Mainstone II FPGA";
-    dc->vmsd = &vmstate_mst_fpga_regs;
-}
-
-static const TypeInfo mst_fpga_info = {
-    .name          = "mainstone-fpga",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(mst_irq_state),
-    .class_init    = mst_fpga_class_init,
-};
-
-static void mst_fpga_register_types(void)
-{
-    type_register_static(&mst_fpga_info);
-}
-
-type_init(mst_fpga_register_types)