hw/misc: AXP209 PMU Emulation

This patch adds minimal support for AXP-209 PMU.
Most important is chip ID since U-Boot SPL expects version 0x1. Besides
the chip ID register, reset values for two more registers used by A10
U-Boot SPL are covered.

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

4 files changed, 248 insertions, 0 deletions

diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 052fb54310..eaeddca277 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -180,4 +180,8 @@ config ALLWINNER_A10_CCM
 config ALLWINNER_A10_DRAMC
     bool
 
+config AXP209_PMU
+    bool
+    depends on I2C
+
 source macio/Kconfig
diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c
new file mode 100644
index 0000000000..2908ed99a6
--- /dev/null
+++ b/hw/misc/axp209.c
@@ -0,0 +1,238 @@
+/*
+ * AXP-209 PMU Emulation
+ *
+ * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/i2c/i2c.h"
+#include "migration/vmstate.h"
+
+#define TYPE_AXP209_PMU "axp209_pmu"
+
+#define AXP209(obj) \
+    OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU)
+
+/* registers */
+enum {
+    REG_POWER_STATUS = 0x0u,
+    REG_OPERATING_MODE,
+    REG_OTG_VBUS_STATUS,
+    REG_CHIP_VERSION,
+    REG_DATA_CACHE_0,
+    REG_DATA_CACHE_1,
+    REG_DATA_CACHE_2,
+    REG_DATA_CACHE_3,
+    REG_DATA_CACHE_4,
+    REG_DATA_CACHE_5,
+    REG_DATA_CACHE_6,
+    REG_DATA_CACHE_7,
+    REG_DATA_CACHE_8,
+    REG_DATA_CACHE_9,
+    REG_DATA_CACHE_A,
+    REG_DATA_CACHE_B,
+    REG_POWER_OUTPUT_CTRL = 0x12u,
+    REG_DC_DC2_OUT_V_CTRL = 0x23u,
+    REG_DC_DC2_DVS_CTRL = 0x25u,
+    REG_DC_DC3_OUT_V_CTRL = 0x27u,
+    REG_LDO2_4_OUT_V_CTRL,
+    REG_LDO3_OUT_V_CTRL,
+    REG_VBUS_CH_MGMT = 0x30u,
+    REG_SHUTDOWN_V_CTRL,
+    REG_SHUTDOWN_CTRL,
+    REG_CHARGE_CTRL_1,
+    REG_CHARGE_CTRL_2,
+    REG_SPARE_CHARGE_CTRL,
+    REG_PEK_KEY_CTRL,
+    REG_DC_DC_FREQ_SET,
+    REG_CHR_TEMP_TH_SET,
+    REG_CHR_HIGH_TEMP_TH_CTRL,
+    REG_IPSOUT_WARN_L1,
+    REG_IPSOUT_WARN_L2,
+    REG_DISCHR_TEMP_TH_SET,
+    REG_DISCHR_HIGH_TEMP_TH_CTRL,
+    REG_IRQ_BANK_1_CTRL = 0x40u,
+    REG_IRQ_BANK_2_CTRL,
+    REG_IRQ_BANK_3_CTRL,
+    REG_IRQ_BANK_4_CTRL,
+    REG_IRQ_BANK_5_CTRL,
+    REG_IRQ_BANK_1_STAT = 0x48u,
+    REG_IRQ_BANK_2_STAT,
+    REG_IRQ_BANK_3_STAT,
+    REG_IRQ_BANK_4_STAT,
+    REG_IRQ_BANK_5_STAT,
+    REG_ADC_ACIN_V_H = 0x56u,
+    REG_ADC_ACIN_V_L,
+    REG_ADC_ACIN_CURR_H,
+    REG_ADC_ACIN_CURR_L,
+    REG_ADC_VBUS_V_H,
+    REG_ADC_VBUS_V_L,
+    REG_ADC_VBUS_CURR_H,
+    REG_ADC_VBUS_CURR_L,
+    REG_ADC_INT_TEMP_H,
+    REG_ADC_INT_TEMP_L,
+    REG_ADC_TEMP_SENS_V_H = 0x62u,
+    REG_ADC_TEMP_SENS_V_L,
+    REG_ADC_BAT_V_H = 0x78u,
+    REG_ADC_BAT_V_L,
+    REG_ADC_BAT_DISCHR_CURR_H,
+    REG_ADC_BAT_DISCHR_CURR_L,
+    REG_ADC_BAT_CHR_CURR_H,
+    REG_ADC_BAT_CHR_CURR_L,
+    REG_ADC_IPSOUT_V_H,
+    REG_ADC_IPSOUT_V_L,
+    REG_DC_DC_MOD_SEL = 0x80u,
+    REG_ADC_EN_1,
+    REG_ADC_EN_2,
+    REG_ADC_SR_CTRL,
+    REG_ADC_IN_RANGE,
+    REG_GPIO1_ADC_IRQ_RISING_TH,
+    REG_GPIO1_ADC_IRQ_FALLING_TH,
+    REG_TIMER_CTRL = 0x8au,
+    REG_VBUS_CTRL_MON_SRP,
+    REG_OVER_TEMP_SHUTDOWN = 0x8fu,
+    REG_GPIO0_FEAT_SET,
+    REG_GPIO_OUT_HIGH_SET,
+    REG_GPIO1_FEAT_SET,
+    REG_GPIO2_FEAT_SET,
+    REG_GPIO_SIG_STATE_SET_MON,
+    REG_GPIO3_SET,
+    REG_COULOMB_CNTR_CTRL = 0xb8u,
+    REG_POWER_MEAS_RES,
+    NR_REGS
+};
+
+#define AXP209_CHIP_VERSION_ID             (0x01)
+#define AXP209_DC_DC2_OUT_V_CTRL_RESET     (0x16)
+#define AXP209_IRQ_BANK_1_CTRL_RESET       (0xd8)
+
+/* A simple I2C slave which returns values of ID or CNT register. */
+typedef struct AXP209I2CState {
+    /*< private >*/
+    I2CSlave i2c;
+    /*< public >*/
+    uint8_t regs[NR_REGS];  /* peripheral registers */
+    uint8_t ptr;            /* current register index */
+    uint8_t count;          /* counter used for tx/rx */
+} AXP209I2CState;
+
+/* Reset all counters and load ID register */
+static void axp209_reset_enter(Object *obj, ResetType type)
+{
+    AXP209I2CState *s = AXP209(obj);
+
+    memset(s->regs, 0, NR_REGS);
+    s->ptr = 0;
+    s->count = 0;
+    s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID;
+    s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET;
+    s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET;
+}
+
+/* Handle events from master. */
+static int axp209_event(I2CSlave *i2c, enum i2c_event event)
+{
+    AXP209I2CState *s = AXP209(i2c);
+
+    s->count = 0;
+
+    return 0;
+}
+
+/* Called when master requests read */
+static uint8_t axp209_rx(I2CSlave *i2c)
+{
+    AXP209I2CState *s = AXP209(i2c);
+    uint8_t ret = 0xff;
+
+    if (s->ptr < NR_REGS) {
+        ret = s->regs[s->ptr++];
+    }
+
+    trace_axp209_rx(s->ptr - 1, ret);
+
+    return ret;
+}
+
+/*
+ * Called when master sends write.
+ * Update ptr with byte 0, then perform write with second byte.
+ */
+static int axp209_tx(I2CSlave *i2c, uint8_t data)
+{
+    AXP209I2CState *s = AXP209(i2c);
+
+    if (s->count == 0) {
+        /* Store register address */
+        s->ptr = data;
+        s->count++;
+        trace_axp209_select(data);
+    } else {
+        trace_axp209_tx(s->ptr, data);
+        if (s->ptr == REG_DC_DC2_OUT_V_CTRL) {
+            s->regs[s->ptr++] = data;
+        }
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_axp209 = {
+    .name = TYPE_AXP209_PMU,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS),
+        VMSTATE_UINT8(count, AXP209I2CState),
+        VMSTATE_UINT8(ptr, AXP209I2CState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void axp209_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+    I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc);
+    ResettableClass *rc = RESETTABLE_CLASS(oc);
+
+    rc->phases.enter = axp209_reset_enter;
+    dc->vmsd = &vmstate_axp209;
+    isc->event = axp209_event;
+    isc->recv = axp209_rx;
+    isc->send = axp209_tx;
+}
+
+static const TypeInfo axp209_info = {
+    .name = TYPE_AXP209_PMU,
+    .parent = TYPE_I2C_SLAVE,
+    .instance_size = sizeof(AXP209I2CState),
+    .class_init = axp209_class_init
+};
+
+static void axp209_register_devices(void)
+{
+    type_register_static(&axp209_info);
+}
+
+type_init(axp209_register_devices);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 9eaa0750b5..448e14b531 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -45,6 +45,7 @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c'
 softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c'))
 softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c'))
 softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c'))
+softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c'))
 softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c'))
 softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c'))
 softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c'))
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index c18bc0605e..c47876a902 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -23,6 +23,11 @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%"
 avr_power_read(uint8_t value) "power_reduc read value:%u"
 avr_power_write(uint8_t value) "power_reduc write value:%u"
 
+# axp209.c
+axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8
+axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8
+axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8
+
 # eccmemctl.c
 ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
 ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x"