trace-events: fix code style: print 0x before hex numbers

The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
 #!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
    for line in fileinput.input(fname, inplace=True):
        arr = re.split(rgroup, line)
        for i in range(0, len(arr), 2):
            arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

        sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

1 files changed, 39 insertions, 39 deletions

diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 56ee4fb5f6..3313585b12 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -1,54 +1,54 @@
 # See docs/devel/tracing.txt for syntax documentation.
 
 # hw/misc/eccmemctl.c
-ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
-ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
-ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
-ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
-ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
-ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
-ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
-ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
-ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
-ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
-ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
-ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
-ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
-ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
-ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
-ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
-ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
-ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
+ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
+ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x"
+ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status 0x%08x"
+ecc_mem_writel_vcr(uint32_t val) "Write slot configuration 0x%08x"
+ecc_mem_writel_dr(uint32_t val) "Write diagnostic 0x%08x"
+ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 0x%08x"
+ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 0x%08x"
+ecc_mem_readl_mer(uint32_t ret) "Read memory enable 0x%08x"
+ecc_mem_readl_mdr(uint32_t ret) "Read memory delay 0x%08x"
+ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status 0x%08x"
+ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration 0x%08x"
+ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 0x%08x"
+ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 0x%08x"
+ecc_mem_readl_dr(uint32_t ret) "Read diagnostic 0x%08x"
+ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 0x%08x"
+ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 0x%08x"
+ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 0x%02x"
+ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 0x%02x"
 
 # hw/misc/slavio_misc.c
 slavio_misc_update_irq_raise(void) "Raise IRQ"
 slavio_misc_update_irq_lower(void) "Lower IRQ"
 slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
-slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
-slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
-slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
-slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
-slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
-slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
-slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
-slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
-slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
-slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
-apc_mem_writeb(uint32_t val) "Write power management %02x"
-apc_mem_readb(uint32_t ret) "Read power management %02x"
-slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
-slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
-slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
-slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
+slavio_cfg_mem_writeb(uint32_t val) "Write config 0x%02x"
+slavio_cfg_mem_readb(uint32_t ret) "Read config 0x%02x"
+slavio_diag_mem_writeb(uint32_t val) "Write diag 0x%02x"
+slavio_diag_mem_readb(uint32_t ret) "Read diag 0x%02x"
+slavio_mdm_mem_writeb(uint32_t val) "Write modem control 0x%02x"
+slavio_mdm_mem_readb(uint32_t ret) "Read modem control 0x%02x"
+slavio_aux1_mem_writeb(uint32_t val) "Write aux1 0x%02x"
+slavio_aux1_mem_readb(uint32_t ret) "Read aux1 0x%02x"
+slavio_aux2_mem_writeb(uint32_t val) "Write aux2 0x%02x"
+slavio_aux2_mem_readb(uint32_t ret) "Read aux2 0x%02x"
+apc_mem_writeb(uint32_t val) "Write power management 0x%02x"
+apc_mem_readb(uint32_t ret) "Read power management 0x%02x"
+slavio_sysctrl_mem_writel(uint32_t val) "Write system control 0x%08x"
+slavio_sysctrl_mem_readl(uint32_t ret) "Read system control 0x%08x"
+slavio_led_mem_writew(uint32_t val) "Write diagnostic LED 0x%04x"
+slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED 0x%04x"
 
 # hw/misc/milkymist-hpdmc.c
-milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
-milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
+milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
+milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
 
 # hw/misc/milkymist-pfpu.c
-milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
+milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a 0x%08x b 0x%08x dma_ptr 0x%08x"
 milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
 
 # hw/misc/aspeed_scu.c