hw/lan9118: Add basic 16-bit mode support.

Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 118 insertions, 6 deletions

diff --git a/hw/lan9118.c b/hw/lan9118.c
index aeb0c39529..7b4fe87fca 100644
--- a/hw/lan9118.c
+++ b/hw/lan9118.c
@@ -235,11 +235,21 @@ typedef struct {
     int32_t rxp_offset;
     int32_t rxp_size;
     int32_t rxp_pad;
+
+    uint32_t write_word_prev_offset;
+    uint32_t write_word_n;
+    uint16_t write_word_l;
+    uint16_t write_word_h;
+    uint32_t read_word_prev_offset;
+    uint32_t read_word_n;
+    uint32_t read_long;
+
+    uint32_t mode_16bit;
 } lan9118_state;
 
 static const VMStateDescription vmstate_lan9118 = {
     .name = "lan9118",
-    .version_id = 1,
+    .version_id = 2,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_PTIMER(timer, lan9118_state),
@@ -294,6 +304,14 @@ static const VMStateDescription vmstate_lan9118 = {
         VMSTATE_INT32(rxp_offset, lan9118_state),
         VMSTATE_INT32(rxp_size, lan9118_state),
         VMSTATE_INT32(rxp_pad, lan9118_state),
+        VMSTATE_UINT32_V(write_word_prev_offset, lan9118_state, 2),
+        VMSTATE_UINT32_V(write_word_n, lan9118_state, 2),
+        VMSTATE_UINT16_V(write_word_l, lan9118_state, 2),
+        VMSTATE_UINT16_V(write_word_h, lan9118_state, 2),
+        VMSTATE_UINT32_V(read_word_prev_offset, lan9118_state, 2),
+        VMSTATE_UINT32_V(read_word_n, lan9118_state, 2),
+        VMSTATE_UINT32_V(read_long, lan9118_state, 2),
+        VMSTATE_UINT32_V(mode_16bit, lan9118_state, 2),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -390,7 +408,7 @@ static void lan9118_reset(DeviceState *d)
     s->fifo_int = 0x48000000;
     s->rx_cfg = 0;
     s->tx_cfg = 0;
-    s->hw_cfg = 0x00050000;
+    s->hw_cfg = s->mode_16bit ? 0x00050000 : 0x00050004;
     s->pmt_ctrl &= 0x45;
     s->gpio_cfg = 0;
     s->txp->fifo_used = 0;
@@ -429,6 +447,9 @@ static void lan9118_reset(DeviceState *d)
     s->mac_mii_data = 0;
     s->mac_flow = 0;
 
+    s->read_word_n = 0;
+    s->write_word_n = 0;
+
     phy_reset(s);
 
     s->eeprom_writable = 0;
@@ -984,7 +1005,7 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
 {
     lan9118_state *s = (lan9118_state *)opaque;
     offset &= 0xff;
-    
+
     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
     if (offset >= 0x20 && offset < 0x40) {
         /* TX FIFO */
@@ -1034,7 +1055,7 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
             /* SRST */
             lan9118_reset(&s->busdev.qdev);
         } else {
-            s->hw_cfg = val & 0x003f300;
+            s->hw_cfg = (val & 0x003f300) | (s->hw_cfg & 0x4);
         }
         break;
     case CSR_RX_DP_CTRL:
@@ -1113,6 +1134,46 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
     lan9118_update(s);
 }
 
+static void lan9118_writew(void *opaque, target_phys_addr_t offset,
+                           uint32_t val)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+    offset &= 0xff;
+
+    if (s->write_word_prev_offset != (offset & ~0x3)) {
+        /* New offset, reset word counter */
+        s->write_word_n = 0;
+        s->write_word_prev_offset = offset & ~0x3;
+    }
+
+    if (offset & 0x2) {
+        s->write_word_h = val;
+    } else {
+        s->write_word_l = val;
+    }
+
+    //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val);
+    s->write_word_n++;
+    if (s->write_word_n == 2) {
+        s->write_word_n = 0;
+        lan9118_writel(s, offset & ~3, s->write_word_l +
+                (s->write_word_h << 16), 4);
+    }
+}
+
+static void lan9118_16bit_mode_write(void *opaque, target_phys_addr_t offset,
+                                     uint64_t val, unsigned size)
+{
+    switch (size) {
+    case 2:
+        return lan9118_writew(opaque, offset, (uint32_t)val);
+    case 4:
+        return lan9118_writel(opaque, offset, val, size);
+    }
+
+    hw_error("lan9118_write: Bad size 0x%x\n", size);
+}
+
 static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
                               unsigned size)
 {
@@ -1149,7 +1210,7 @@ static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
     case CSR_TX_CFG:
         return s->tx_cfg;
     case CSR_HW_CFG:
-        return s->hw_cfg | 0x4;
+        return s->hw_cfg;
     case CSR_RX_DP_CTRL:
         return 0;
     case CSR_RX_FIFO_INF:
@@ -1187,12 +1248,60 @@ static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
     return 0;
 }
 
+static uint32_t lan9118_readw(void *opaque, target_phys_addr_t offset)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+    uint32_t val;
+
+    if (s->read_word_prev_offset != (offset & ~0x3)) {
+        /* New offset, reset word counter */
+        s->read_word_n = 0;
+        s->read_word_prev_offset = offset & ~0x3;
+    }
+
+    s->read_word_n++;
+    if (s->read_word_n == 1) {
+        s->read_long = lan9118_readl(s, offset & ~3, 4);
+    } else {
+        s->read_word_n = 0;
+    }
+
+    if (offset & 2) {
+        val = s->read_long >> 16;
+    } else {
+        val = s->read_long & 0xFFFF;
+    }
+
+    //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val);
+    return val;
+}
+
+static uint64_t lan9118_16bit_mode_read(void *opaque, target_phys_addr_t offset,
+                                        unsigned size)
+{
+    switch (size) {
+    case 2:
+        return lan9118_readw(opaque, offset);
+    case 4:
+        return lan9118_readl(opaque, offset, size);
+    }
+
+    hw_error("lan9118_read: Bad size 0x%x\n", size);
+    return 0;
+}
+
 static const MemoryRegionOps lan9118_mem_ops = {
     .read = lan9118_readl,
     .write = lan9118_writel,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
+static const MemoryRegionOps lan9118_16bit_mem_ops = {
+    .read = lan9118_16bit_mode_read,
+    .write = lan9118_16bit_mode_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
 static void lan9118_cleanup(VLANClientState *nc)
 {
     lan9118_state *s = DO_UPCAST(NICState, nc, nc)->opaque;
@@ -1214,8 +1323,10 @@ static int lan9118_init1(SysBusDevice *dev)
     lan9118_state *s = FROM_SYSBUS(lan9118_state, dev);
     QEMUBH *bh;
     int i;
+    const MemoryRegionOps *mem_ops =
+            s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops;
 
-    memory_region_init_io(&s->mmio, &lan9118_mem_ops, s, "lan9118-mmio", 0x100);
+    memory_region_init_io(&s->mmio, mem_ops, s, "lan9118-mmio", 0x100);
     sysbus_init_mmio(dev, &s->mmio);
     sysbus_init_irq(dev, &s->irq);
     qemu_macaddr_default_if_unset(&s->conf.macaddr);
@@ -1240,6 +1351,7 @@ static int lan9118_init1(SysBusDevice *dev)
 
 static Property lan9118_properties[] = {
     DEFINE_NIC_PROPERTIES(lan9118_state, conf),
+    DEFINE_PROP_UINT32("mode_16bit", lan9118_state, mode_16bit, 0),
     DEFINE_PROP_END_OF_LIST(),
 };