diff options
| author | Peter Maydell <peter.maydell@linaro.org> | 2022-04-08 15:15:34 +0100 |
|---|---|---|
| committer | Peter Maydell <peter.maydell@linaro.org> | 2022-04-22 14:44:52 +0100 |
| commit | c3f21b065a41c14b6a18a38e417379ac75b9fc0e (patch) | |
| tree | 27f4f0e28975392aea0b56b4f7ba829d3ae55f84 /hw/intc/arm_gicv3_cpuif.c | |
| parent | 10337638bbaffa03f280a83ed23940aedc2de9ce (diff) | |
hw/intc/arm_gicv3_cpuif: Support vLPIs
The CPU interface changes to support vLPIs are fairly minor:
in the parts of the code that currently look at the list registers
to determine the highest priority pending virtual interrupt, we
must also look at the highest priority pending vLPI. To do this
we change hppvi_index() to check the vLPI and return a special-case
value if that is the right virtual interrupt to take. The callsites
(which handle HPPIR and IAR registers and the "raise vIRQ and vFIQ
lines" code) then have to handle this special-case value.
This commit includes two interfaces with the as-yet-unwritten
redistributor code:
* the new GICv3CPUState::hppvlpi will be set by the redistributor
(in the same way as the existing hpplpi does for physical LPIs)
* when the CPU interface acknowledges a vLPI it needs to set it
to non-pending; the new gicv3_redist_vlpi_pending() function
(which matches the existing gicv3_redist_lpi_pending() used
for physical LPIs) is a stub that will be filled in later
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-26-peter.maydell@linaro.org
Diffstat (limited to 'hw/intc/arm_gicv3_cpuif.c')
| -rw-r--r-- | hw/intc/arm_gicv3_cpuif.c | 119 |
1 files changed, 114 insertions, 5 deletions
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index 5fb64d4663..f11863ff61 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -21,6 +21,12 @@ #include "hw/irq.h" #include "cpu.h" +/* + * Special case return value from hppvi_index(); must be larger than + * the architecturally maximum possible list register index (which is 15) + */ +#define HPPVI_INDEX_VLPI 16 + static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; @@ -157,10 +163,18 @@ static int ich_highest_active_virt_prio(GICv3CPUState *cs) static int hppvi_index(GICv3CPUState *cs) { - /* Return the list register index of the highest priority pending + /* + * Return the list register index of the highest priority pending * virtual interrupt, as per the HighestPriorityVirtualInterrupt * pseudocode. If no pending virtual interrupts, return -1. + * If the highest priority pending virtual interrupt is a vLPI, + * return HPPVI_INDEX_VLPI. + * (The pseudocode handles checking whether the vLPI is higher + * priority than the highest priority list register at every + * callsite of HighestPriorityVirtualInterrupt; we check it here.) */ + ARMCPU *cpu = ARM_CPU(cs->cpu); + CPUARMState *env = &cpu->env; int idx = -1; int i; /* Note that a list register entry with a priority of 0xff will @@ -202,6 +216,23 @@ static int hppvi_index(GICv3CPUState *cs) } } + /* + * "no pending vLPI" is indicated with prio = 0xff, which always + * fails the priority check here. vLPIs are only considered + * when we are in Non-Secure state. + */ + if (cs->hppvlpi.prio < prio && !arm_is_secure(env)) { + if (cs->hppvlpi.grp == GICV3_G0) { + if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0) { + return HPPVI_INDEX_VLPI; + } + } else { + if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1) { + return HPPVI_INDEX_VLPI; + } + } + } + return idx; } @@ -289,6 +320,47 @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) return false; } +static bool icv_hppvlpi_can_preempt(GICv3CPUState *cs) +{ + /* + * Return true if we can signal the highest priority pending vLPI. + * We can assume we're Non-secure because hppvi_index() already + * tested for that. + */ + uint32_t mask, rprio, vpmr; + + if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) { + /* Virtual interface disabled */ + return false; + } + + vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT, + ICH_VMCR_EL2_VPMR_LENGTH); + + if (cs->hppvlpi.prio >= vpmr) { + /* Priority mask masks this interrupt */ + return false; + } + + rprio = ich_highest_active_virt_prio(cs); + if (rprio == 0xff) { + /* No running interrupt so we can preempt */ + return true; + } + + mask = icv_gprio_mask(cs, cs->hppvlpi.grp); + + /* + * We only preempt a running interrupt if the pending interrupt's + * group priority is sufficient (the subpriorities are not considered). + */ + if ((cs->hppvlpi.prio & mask) < (rprio & mask)) { + return true; + } + + return false; +} + static uint32_t eoi_maintenance_interrupt_state(GICv3CPUState *cs, uint32_t *misr) { @@ -386,8 +458,18 @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) int fiqlevel = 0; idx = hppvi_index(cs); - trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx); - if (idx >= 0) { + trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx, + cs->hppvlpi.irq, cs->hppvlpi.grp, + cs->hppvlpi.prio); + if (idx == HPPVI_INDEX_VLPI) { + if (icv_hppvlpi_can_preempt(cs)) { + if (cs->hppvlpi.grp == GICV3_G0) { + fiqlevel = 1; + } else { + irqlevel = 1; + } + } + } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; if (icv_hppi_can_preempt(cs, lr)) { @@ -619,7 +701,11 @@ static uint64_t icv_hppir_read(CPUARMState *env, const ARMCPRegInfo *ri) int idx = hppvi_index(cs); uint64_t value = INTID_SPURIOUS; - if (idx >= 0) { + if (idx == HPPVI_INDEX_VLPI) { + if (cs->hppvlpi.grp == grp) { + value = cs->hppvlpi.irq; + } + } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; @@ -650,6 +736,18 @@ static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp) cs->ich_apr[grp][regno] |= (1 << regbit); } +static void icv_activate_vlpi(GICv3CPUState *cs) +{ + uint32_t mask = icv_gprio_mask(cs, cs->hppvlpi.grp); + int prio = cs->hppvlpi.prio & mask; + int aprbit = prio >> (8 - cs->vprebits); + int regno = aprbit / 32; + int regbit = aprbit % 32; + + cs->ich_apr[cs->hppvlpi.grp][regno] |= (1 << regbit); + gicv3_redist_vlpi_pending(cs, cs->hppvlpi.irq, 0); +} + static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); @@ -657,7 +755,12 @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; - if (idx >= 0) { + if (idx == HPPVI_INDEX_VLPI) { + if (cs->hppvlpi.grp == grp && icv_hppvlpi_can_preempt(cs)) { + intid = cs->hppvlpi.irq; + icv_activate_vlpi(cs); + } + } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; @@ -2632,6 +2735,12 @@ static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque) GICv3CPUState *cs = opaque; gicv3_cpuif_update(cs); + /* + * Because vLPIs are only pending in NonSecure state, + * an EL change can change the VIRQ/VFIQ status (but + * cannot affect the maintenance interrupt state) + */ + gicv3_cpuif_virt_irq_fiq_update(cs); } void gicv3_init_cpuif(GICv3State *s) |