hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 521 insertions, 0 deletions

diff --git a/hw/input/lm832x.c b/hw/input/lm832x.c
new file mode 100644
index 0000000000..bacbeb2343
--- /dev/null
+++ b/hw/input/lm832x.c
@@ -0,0 +1,521 @@
+/*
+ * National Semiconductor LM8322/8323 GPIO keyboard & PWM chips.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "qemu/timer.h"
+#include "ui/console.h"
+
+typedef struct {
+    I2CSlave i2c;
+    uint8_t i2c_dir;
+    uint8_t i2c_cycle;
+    uint8_t reg;
+
+    qemu_irq nirq;
+    uint16_t model;
+
+    struct {
+        qemu_irq out[2];
+        int in[2][2];
+    } mux;
+
+    uint8_t config;
+    uint8_t status;
+    uint8_t acttime;
+    uint8_t error;
+    uint8_t clock;
+
+    struct {
+        uint16_t pull;
+        uint16_t mask;
+        uint16_t dir;
+        uint16_t level;
+        qemu_irq out[16];
+    } gpio;
+
+    struct {
+        uint8_t dbnctime;
+        uint8_t size;
+        uint8_t start;
+        uint8_t len;
+        uint8_t fifo[16];
+    } kbd;
+
+    struct {
+        uint16_t file[256];
+	uint8_t faddr;
+        uint8_t addr[3];
+        QEMUTimer *tm[3];
+    } pwm;
+} LM823KbdState;
+
+#define INT_KEYPAD		(1 << 0)
+#define INT_ERROR		(1 << 3)
+#define INT_NOINIT		(1 << 4)
+#define INT_PWMEND(n)		(1 << (5 + n))
+
+#define ERR_BADPAR		(1 << 0)
+#define ERR_CMDUNK		(1 << 1)
+#define ERR_KEYOVR		(1 << 2)
+#define ERR_FIFOOVR		(1 << 6)
+
+static void lm_kbd_irq_update(LM823KbdState *s)
+{
+    qemu_set_irq(s->nirq, !s->status);
+}
+
+static void lm_kbd_gpio_update(LM823KbdState *s)
+{
+}
+
+static void lm_kbd_reset(LM823KbdState *s)
+{
+    s->config = 0x80;
+    s->status = INT_NOINIT;
+    s->acttime = 125;
+    s->kbd.dbnctime = 3;
+    s->kbd.size = 0x33;
+    s->clock = 0x08;
+
+    lm_kbd_irq_update(s);
+    lm_kbd_gpio_update(s);
+}
+
+static void lm_kbd_error(LM823KbdState *s, int err)
+{
+    s->error |= err;
+    s->status |= INT_ERROR;
+    lm_kbd_irq_update(s);
+}
+
+static void lm_kbd_pwm_tick(LM823KbdState *s, int line)
+{
+}
+
+static void lm_kbd_pwm_start(LM823KbdState *s, int line)
+{
+    lm_kbd_pwm_tick(s, line);
+}
+
+static void lm_kbd_pwm0_tick(void *opaque)
+{
+    lm_kbd_pwm_tick(opaque, 0);
+}
+static void lm_kbd_pwm1_tick(void *opaque)
+{
+    lm_kbd_pwm_tick(opaque, 1);
+}
+static void lm_kbd_pwm2_tick(void *opaque)
+{
+    lm_kbd_pwm_tick(opaque, 2);
+}
+
+enum {
+    LM832x_CMD_READ_ID		= 0x80, /* Read chip ID. */
+    LM832x_CMD_WRITE_CFG	= 0x81, /* Set configuration item. */
+    LM832x_CMD_READ_INT		= 0x82, /* Get interrupt status. */
+    LM832x_CMD_RESET		= 0x83, /* Reset, same as external one */
+    LM823x_CMD_WRITE_PULL_DOWN	= 0x84, /* Select GPIO pull-up/down. */
+    LM832x_CMD_WRITE_PORT_SEL	= 0x85, /* Select GPIO in/out. */
+    LM832x_CMD_WRITE_PORT_STATE	= 0x86, /* Set GPIO pull-up/down. */
+    LM832x_CMD_READ_PORT_SEL	= 0x87, /* Get GPIO in/out. */
+    LM832x_CMD_READ_PORT_STATE	= 0x88, /* Get GPIO pull-up/down. */
+    LM832x_CMD_READ_FIFO	= 0x89, /* Read byte from FIFO. */
+    LM832x_CMD_RPT_READ_FIFO	= 0x8a, /* Read FIFO (no increment). */
+    LM832x_CMD_SET_ACTIVE	= 0x8b, /* Set active time. */
+    LM832x_CMD_READ_ERROR	= 0x8c, /* Get error status. */
+    LM832x_CMD_READ_ROTATOR	= 0x8e, /* Read rotator status. */
+    LM832x_CMD_SET_DEBOUNCE	= 0x8f, /* Set debouncing time. */
+    LM832x_CMD_SET_KEY_SIZE	= 0x90, /* Set keypad size. */
+    LM832x_CMD_READ_KEY_SIZE	= 0x91, /* Get keypad size. */
+    LM832x_CMD_READ_CFG		= 0x92, /* Get configuration item. */
+    LM832x_CMD_WRITE_CLOCK	= 0x93, /* Set clock config. */
+    LM832x_CMD_READ_CLOCK	= 0x94, /* Get clock config. */
+    LM832x_CMD_PWM_WRITE	= 0x95, /* Write PWM script. */
+    LM832x_CMD_PWM_START	= 0x96, /* Start PWM engine. */
+    LM832x_CMD_PWM_STOP		= 0x97, /* Stop PWM engine. */
+    LM832x_GENERAL_ERROR	= 0xff, /* There was one error.
+                                           Previously was represented by -1
+                                           This is not a command */
+};
+
+#define LM832x_MAX_KPX		8
+#define LM832x_MAX_KPY		12
+
+static uint8_t lm_kbd_read(LM823KbdState *s, int reg, int byte)
+{
+    int ret;
+
+    switch (reg) {
+    case LM832x_CMD_READ_ID:
+        ret = 0x0400;
+        break;
+
+    case LM832x_CMD_READ_INT:
+        ret = s->status;
+        if (!(s->status & INT_NOINIT)) {
+            s->status = 0;
+            lm_kbd_irq_update(s);
+        }
+        break;
+
+    case LM832x_CMD_READ_PORT_SEL:
+        ret = s->gpio.dir;
+        break;
+    case LM832x_CMD_READ_PORT_STATE:
+        ret = s->gpio.mask;
+        break;
+
+    case LM832x_CMD_READ_FIFO:
+        if (s->kbd.len <= 1)
+            return 0x00;
+
+        /* Example response from the two commands after a INT_KEYPAD
+         * interrupt caused by the key 0x3c being pressed:
+         * RPT_READ_FIFO: 55 bc 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+         *     READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+         * RPT_READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+         *
+         * 55 is the code of the key release event serviced in the previous
+         * interrupt handling.
+         *
+         * TODO: find out whether the FIFO is advanced a single character
+         * before reading every byte or the whole size of the FIFO at the
+         * last LM832x_CMD_READ_FIFO.  This affects LM832x_CMD_RPT_READ_FIFO
+         * output in cases where there are more than one event in the FIFO.
+         * Assume 0xbc and 0x3c events are in the FIFO:
+         * RPT_READ_FIFO: 55 bc 3c 00 4e ff 0a 50 08 00 29 d9 08 01 c9
+         *     READ_FIFO: bc 3c 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9
+         * Does RPT_READ_FIFO now return 0xbc and 0x3c or only 0x3c?
+         */
+        s->kbd.start ++;
+        s->kbd.start &= sizeof(s->kbd.fifo) - 1;
+        s->kbd.len --;
+
+        return s->kbd.fifo[s->kbd.start];
+    case LM832x_CMD_RPT_READ_FIFO:
+        if (byte >= s->kbd.len)
+            return 0x00;
+
+        return s->kbd.fifo[(s->kbd.start + byte) & (sizeof(s->kbd.fifo) - 1)];
+
+    case LM832x_CMD_READ_ERROR:
+        return s->error;
+
+    case LM832x_CMD_READ_ROTATOR:
+        return 0;
+
+    case LM832x_CMD_READ_KEY_SIZE:
+        return s->kbd.size;
+
+    case LM832x_CMD_READ_CFG:
+        return s->config & 0xf;
+
+    case LM832x_CMD_READ_CLOCK:
+        return (s->clock & 0xfc) | 2;
+
+    default:
+        lm_kbd_error(s, ERR_CMDUNK);
+        fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg);
+        return 0x00;
+    }
+
+    return ret >> (byte << 3);
+}
+
+static void lm_kbd_write(LM823KbdState *s, int reg, int byte, uint8_t value)
+{
+    switch (reg) {
+    case LM832x_CMD_WRITE_CFG:
+        s->config = value;
+        /* This must be done whenever s->mux.in is updated (never).  */
+        if ((s->config >> 1) & 1)			/* MUX1EN */
+            qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 0) & 1]);
+        if ((s->config >> 3) & 1)			/* MUX2EN */
+            qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 2) & 1]);
+        /* TODO: check that this is issued only following the chip reset
+         * and not in the middle of operation and that it is followed by
+         * the GPIO ports re-resablishing through WRITE_PORT_SEL and
+         * WRITE_PORT_STATE (using a timer perhaps) and otherwise output
+         * warnings.  */
+        s->status = 0;
+        lm_kbd_irq_update(s);
+        s->kbd.len = 0;
+        s->kbd.start = 0;
+        s->reg = LM832x_GENERAL_ERROR;
+        break;
+
+    case LM832x_CMD_RESET:
+        if (value == 0xaa)
+            lm_kbd_reset(s);
+        else
+            lm_kbd_error(s, ERR_BADPAR);
+        s->reg = LM832x_GENERAL_ERROR;
+        break;
+
+    case LM823x_CMD_WRITE_PULL_DOWN:
+        if (!byte)
+            s->gpio.pull = value;
+        else {
+            s->gpio.pull |= value << 8;
+            lm_kbd_gpio_update(s);
+            s->reg = LM832x_GENERAL_ERROR;
+        }
+        break;
+    case LM832x_CMD_WRITE_PORT_SEL:
+        if (!byte)
+            s->gpio.dir = value;
+        else {
+            s->gpio.dir |= value << 8;
+            lm_kbd_gpio_update(s);
+            s->reg = LM832x_GENERAL_ERROR;
+        }
+        break;
+    case LM832x_CMD_WRITE_PORT_STATE:
+        if (!byte)
+            s->gpio.mask = value;
+        else {
+            s->gpio.mask |= value << 8;
+            lm_kbd_gpio_update(s);
+            s->reg = LM832x_GENERAL_ERROR;
+        }
+        break;
+
+    case LM832x_CMD_SET_ACTIVE:
+        s->acttime = value;
+        s->reg = LM832x_GENERAL_ERROR;
+        break;
+
+    case LM832x_CMD_SET_DEBOUNCE:
+        s->kbd.dbnctime = value;
+        s->reg = LM832x_GENERAL_ERROR;
+        if (!value)
+            lm_kbd_error(s, ERR_BADPAR);
+        break;
+
+    case LM832x_CMD_SET_KEY_SIZE:
+        s->kbd.size = value;
+        s->reg = LM832x_GENERAL_ERROR;
+        if (
+                        (value & 0xf) < 3 || (value & 0xf) > LM832x_MAX_KPY ||
+                        (value >> 4) < 3 || (value >> 4) > LM832x_MAX_KPX)
+            lm_kbd_error(s, ERR_BADPAR);
+        break;
+
+    case LM832x_CMD_WRITE_CLOCK:
+        s->clock = value;
+        s->reg = LM832x_GENERAL_ERROR;
+        if ((value & 3) && (value & 3) != 3) {
+            lm_kbd_error(s, ERR_BADPAR);
+            fprintf(stderr, "%s: invalid clock setting in RCPWM\n",
+                            __FUNCTION__);
+        }
+        /* TODO: Validate that the command is only issued once */
+        break;
+
+    case LM832x_CMD_PWM_WRITE:
+        if (byte == 0) {
+            if (!(value & 3) || (value >> 2) > 59) {
+                lm_kbd_error(s, ERR_BADPAR);
+                s->reg = LM832x_GENERAL_ERROR;
+                break;
+            }
+
+            s->pwm.faddr = value;
+            s->pwm.file[s->pwm.faddr] = 0;
+        } else if (byte == 1) {
+            s->pwm.file[s->pwm.faddr] |= value << 8;
+        } else if (byte == 2) {
+            s->pwm.file[s->pwm.faddr] |= value << 0;
+            s->reg = LM832x_GENERAL_ERROR;
+        }
+        break;
+    case LM832x_CMD_PWM_START:
+        s->reg = LM832x_GENERAL_ERROR;
+        if (!(value & 3) || (value >> 2) > 59) {
+            lm_kbd_error(s, ERR_BADPAR);
+            break;
+        }
+
+        s->pwm.addr[(value & 3) - 1] = value >> 2;
+        lm_kbd_pwm_start(s, (value & 3) - 1);
+        break;
+    case LM832x_CMD_PWM_STOP:
+        s->reg = LM832x_GENERAL_ERROR;
+        if (!(value & 3)) {
+            lm_kbd_error(s, ERR_BADPAR);
+            break;
+        }
+
+        qemu_del_timer(s->pwm.tm[(value & 3) - 1]);
+        break;
+
+    case LM832x_GENERAL_ERROR:
+        lm_kbd_error(s, ERR_BADPAR);
+        break;
+    default:
+        lm_kbd_error(s, ERR_CMDUNK);
+        fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg);
+        break;
+    }
+}
+
+static void lm_i2c_event(I2CSlave *i2c, enum i2c_event event)
+{
+    LM823KbdState *s = FROM_I2C_SLAVE(LM823KbdState, i2c);
+
+    switch (event) {
+    case I2C_START_RECV:
+    case I2C_START_SEND:
+        s->i2c_cycle = 0;
+        s->i2c_dir = (event == I2C_START_SEND);
+        break;
+
+    default:
+        break;
+    }
+}
+
+static int lm_i2c_rx(I2CSlave *i2c)
+{
+    LM823KbdState *s = FROM_I2C_SLAVE(LM823KbdState, i2c);
+
+    return lm_kbd_read(s, s->reg, s->i2c_cycle ++);
+}
+
+static int lm_i2c_tx(I2CSlave *i2c, uint8_t data)
+{
+    LM823KbdState *s = (LM823KbdState *) i2c;
+
+    if (!s->i2c_cycle)
+        s->reg = data;
+    else
+        lm_kbd_write(s, s->reg, s->i2c_cycle - 1, data);
+    s->i2c_cycle ++;
+
+    return 0;
+}
+
+static int lm_kbd_post_load(void *opaque, int version_id)
+{
+    LM823KbdState *s = opaque;
+
+    lm_kbd_irq_update(s);
+    lm_kbd_gpio_update(s);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_lm_kbd = {
+    .name = "LM8323",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .minimum_version_id_old = 0,
+    .post_load = lm_kbd_post_load,
+    .fields      = (VMStateField []) {
+        VMSTATE_I2C_SLAVE(i2c, LM823KbdState),
+        VMSTATE_UINT8(i2c_dir, LM823KbdState),
+        VMSTATE_UINT8(i2c_cycle, LM823KbdState),
+        VMSTATE_UINT8(reg, LM823KbdState),
+        VMSTATE_UINT8(config, LM823KbdState),
+        VMSTATE_UINT8(status, LM823KbdState),
+        VMSTATE_UINT8(acttime, LM823KbdState),
+        VMSTATE_UINT8(error, LM823KbdState),
+        VMSTATE_UINT8(clock, LM823KbdState),
+        VMSTATE_UINT16(gpio.pull, LM823KbdState),
+        VMSTATE_UINT16(gpio.mask, LM823KbdState),
+        VMSTATE_UINT16(gpio.dir, LM823KbdState),
+        VMSTATE_UINT16(gpio.level, LM823KbdState),
+        VMSTATE_UINT8(kbd.dbnctime, LM823KbdState),
+        VMSTATE_UINT8(kbd.size, LM823KbdState),
+        VMSTATE_UINT8(kbd.start, LM823KbdState),
+        VMSTATE_UINT8(kbd.len, LM823KbdState),
+        VMSTATE_BUFFER(kbd.fifo, LM823KbdState),
+        VMSTATE_UINT16_ARRAY(pwm.file, LM823KbdState, 256),
+        VMSTATE_UINT8(pwm.faddr, LM823KbdState),
+        VMSTATE_BUFFER(pwm.addr, LM823KbdState),
+        VMSTATE_TIMER_ARRAY(pwm.tm, LM823KbdState, 3),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+
+static int lm8323_init(I2CSlave *i2c)
+{
+    LM823KbdState *s = FROM_I2C_SLAVE(LM823KbdState, i2c);
+
+    s->model = 0x8323;
+    s->pwm.tm[0] = qemu_new_timer_ns(vm_clock, lm_kbd_pwm0_tick, s);
+    s->pwm.tm[1] = qemu_new_timer_ns(vm_clock, lm_kbd_pwm1_tick, s);
+    s->pwm.tm[2] = qemu_new_timer_ns(vm_clock, lm_kbd_pwm2_tick, s);
+    qdev_init_gpio_out(&i2c->qdev, &s->nirq, 1);
+
+    lm_kbd_reset(s);
+
+    qemu_register_reset((void *) lm_kbd_reset, s);
+    return 0;
+}
+
+void lm832x_key_event(DeviceState *dev, int key, int state)
+{
+    LM823KbdState *s = FROM_I2C_SLAVE(LM823KbdState, I2C_SLAVE(dev));
+
+    if ((s->status & INT_ERROR) && (s->error & ERR_FIFOOVR))
+        return;
+
+    if (s->kbd.len >= sizeof(s->kbd.fifo)) {
+        lm_kbd_error(s, ERR_FIFOOVR);
+        return;
+    }
+
+    s->kbd.fifo[(s->kbd.start + s->kbd.len ++) & (sizeof(s->kbd.fifo) - 1)] =
+            key | (state << 7);
+
+    /* We never set ERR_KEYOVR because we support multiple keys fine.  */
+    s->status |= INT_KEYPAD;
+    lm_kbd_irq_update(s);
+}
+
+static void lm8323_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+    k->init = lm8323_init;
+    k->event = lm_i2c_event;
+    k->recv = lm_i2c_rx;
+    k->send = lm_i2c_tx;
+    dc->vmsd = &vmstate_lm_kbd;
+}
+
+static const TypeInfo lm8323_info = {
+    .name          = "lm8323",
+    .parent        = TYPE_I2C_SLAVE,
+    .instance_size = sizeof(LM823KbdState),
+    .class_init    = lm8323_class_init,
+};
+
+static void lm832x_register_types(void)
+{
+    type_register_static(&lm8323_info);
+}
+
+type_init(lm832x_register_types)