sii3112: Remove duplicated code and use PCI IDE ops instead

Parts of the SiI3112 mmio are identical to PCI IDE registers so we can
use the corresponding functions that were factored out into ide/pci.c.
This removes code duplication and simplifies the SiI3112 model which
also helped to spot a copy paste error where reading status of the
2nd channel read the 1st channel instead. This is also fixed here.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 793b6a7934ef2bba26b8d066bec446019efa6c5d.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

1 files changed, 8 insertions, 44 deletions

diff --git a/hw/ide/sii3112.c b/hw/ide/sii3112.c
index 743a50ed51..59db09cfe4 100644
--- a/hw/ide/sii3112.c
+++ b/hw/ide/sii3112.c
@@ -88,35 +88,19 @@ static uint64_t sii3112_reg_read(void *opaque, hwaddr addr,
         val |= (uint32_t)d->i.bmdma[1].status << 16;
         break;
     case 0x80 ... 0x87:
-        if (size == 1) {
-            val = ide_ioport_read(&d->i.bus[0], addr - 0x80);
-        } else if (addr == 0x80) {
-            val = (size == 2) ? ide_data_readw(&d->i.bus[0], 0) :
-                                ide_data_readl(&d->i.bus[0], 0);
-        } else {
-            val = (1ULL << (size * 8)) - 1;
-        }
+        val = pci_ide_data_le_ops.read(&d->i.bus[0], addr - 0x80, size);
         break;
     case 0x8a:
-        val = (size == 1) ? ide_status_read(&d->i.bus[0], 4) :
-                            (1ULL << (size * 8)) - 1;
+        val = pci_ide_cmd_le_ops.read(&d->i.bus[0], 2, size);
         break;
     case 0xa0:
         val = d->regs[0].confstat;
         break;
     case 0xc0 ... 0xc7:
-        if (size == 1) {
-            val = ide_ioport_read(&d->i.bus[1], addr - 0xc0);
-        } else if (addr == 0xc0) {
-            val = (size == 2) ? ide_data_readw(&d->i.bus[1], 0) :
-                                ide_data_readl(&d->i.bus[1], 0);
-        } else {
-            val = (1ULL << (size * 8)) - 1;
-        }
+        val = pci_ide_data_le_ops.read(&d->i.bus[1], addr - 0xc0, size);
         break;
     case 0xca:
-        val = (size == 1) ? ide_status_read(&d->i.bus[0], 4) :
-                            (1ULL << (size * 8)) - 1;
+        val = pci_ide_cmd_le_ops.read(&d->i.bus[1], 2, size);
         break;
     case 0xe0:
         val = d->regs[1].confstat;
@@ -186,36 +170,16 @@ static void sii3112_reg_write(void *opaque, hwaddr addr,
         bmdma_addr_ioport_ops.write(&d->i.bmdma[1], addr - 12, val, size);
         break;
     case 0x80 ... 0x87:
-        if (size == 1) {
-            ide_ioport_write(&d->i.bus[0], addr - 0x80, val);
-        } else if (addr == 0x80) {
-            if (size == 2) {
-                ide_data_writew(&d->i.bus[0], 0, val);
-            } else {
-                ide_data_writel(&d->i.bus[0], 0, val);
-            }
-        }
+        pci_ide_data_le_ops.write(&d->i.bus[0], addr - 0x80, val, size);
         break;
     case 0x8a:
-        if (size == 1) {
-            ide_cmd_write(&d->i.bus[0], 4, val);
-        }
+        pci_ide_cmd_le_ops.write(&d->i.bus[0], 2, val, size);
         break;
     case 0xc0 ... 0xc7:
-        if (size == 1) {
-            ide_ioport_write(&d->i.bus[1], addr - 0xc0, val);
-        } else if (addr == 0xc0) {
-            if (size == 2) {
-                ide_data_writew(&d->i.bus[1], 0, val);
-            } else {
-                ide_data_writel(&d->i.bus[1], 0, val);
-            }
-        }
+        pci_ide_data_le_ops.write(&d->i.bus[1], addr - 0xc0, val, size);
         break;
     case 0xca:
-        if (size == 1) {
-            ide_cmd_write(&d->i.bus[1], 4, val);
-        }
+        pci_ide_cmd_le_ops.write(&d->i.bus[1], 2, val, size);
         break;
     case 0x100:
         d->regs[0].scontrol = val & 0xfff;