ATAPI: Replace DEBUG_IDE_ATAPI with tracing events

As part of the ongoing effort to modernize the tracing facilities for
the IDE family of devices, remove PRINTFs in the ATAPI device with
actual tracing events.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170901001502.29915-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

1 files changed, 23 insertions, 41 deletions

diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index fc1d19c6d4..9b84a1beef 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -27,6 +27,7 @@
 #include "hw/ide/internal.h"
 #include "hw/scsi/scsi.h"
 #include "sysemu/block-backend.h"
+#include "trace.h"
 
 #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
 #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
@@ -116,9 +117,7 @@ cd_read_sector_sync(IDEState *s)
     block_acct_start(blk_get_stats(s->blk), &s->acct,
                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
 
-#ifdef DEBUG_IDE_ATAPI
-    printf("cd_read_sector_sync: lba=%d\n", s->lba);
-#endif
+    trace_cd_read_sector_sync(s->lba);
 
     switch (s->cd_sector_size) {
     case 2048:
@@ -152,9 +151,7 @@ static void cd_read_sector_cb(void *opaque, int ret)
 {
     IDEState *s = opaque;
 
-#ifdef DEBUG_IDE_ATAPI
-    printf("cd_read_sector_cb: lba=%d ret=%d\n", s->lba, ret);
-#endif
+    trace_cd_read_sector_cb(s->lba, ret);
 
     if (ret < 0) {
         block_acct_failed(blk_get_stats(s->blk), &s->acct);
@@ -188,9 +185,7 @@ static int cd_read_sector(IDEState *s)
     s->iov.iov_len = ATAPI_SECTOR_SIZE;
     qemu_iovec_init_external(&s->qiov, &s->iov, 1);
 
-#ifdef DEBUG_IDE_ATAPI
-    printf("cd_read_sector: lba=%d\n", s->lba);
-#endif
+    trace_cd_read_sector(s->lba);
 
     block_acct_start(blk_get_stats(s->blk), &s->acct,
                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
@@ -213,9 +208,7 @@ void ide_atapi_cmd_ok(IDEState *s)
 
 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
 {
-#ifdef DEBUG_IDE_ATAPI
-    printf("atapi_cmd_error: sense=0x%x asc=0x%x\n", sense_key, asc);
-#endif
+    trace_ide_atapi_cmd_error(s, sense_key, asc);
     s->error = sense_key << 4;
     s->status = READY_STAT | ERR_STAT;
     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
@@ -252,19 +245,14 @@ static uint16_t atapi_byte_count_limit(IDEState *s)
 void ide_atapi_cmd_reply_end(IDEState *s)
 {
     int byte_count_limit, size, ret;
-#ifdef DEBUG_IDE_ATAPI
-    printf("reply: tx_size=%d elem_tx_size=%d index=%d\n",
-           s->packet_transfer_size,
-           s->elementary_transfer_size,
-           s->io_buffer_index);
-#endif
+    trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
+                                  s->elementary_transfer_size,
+                                  s->io_buffer_index);
     if (s->packet_transfer_size <= 0) {
         /* end of transfer */
         ide_atapi_cmd_ok(s);
         ide_set_irq(s->bus);
-#ifdef DEBUG_IDE_ATAPI
-        printf("end of transfer, status=0x%x\n", s->status);
-#endif
+        trace_ide_atapi_cmd_reply_end_eot(s, s->status);
     } else {
         /* see if a new sector must be read */
         if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
@@ -300,9 +288,7 @@ void ide_atapi_cmd_reply_end(IDEState *s)
             /* a new transfer is needed */
             s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
             byte_count_limit = atapi_byte_count_limit(s);
-#ifdef DEBUG_IDE_ATAPI
-            printf("byte_count_limit=%d\n", byte_count_limit);
-#endif
+            trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
             size = s->packet_transfer_size;
             if (size > byte_count_limit) {
                 /* byte count limit must be even if this case */
@@ -324,9 +310,7 @@ void ide_atapi_cmd_reply_end(IDEState *s)
             ide_transfer_start(s, s->io_buffer + s->io_buffer_index - size,
                                size, ide_atapi_cmd_reply_end);
             ide_set_irq(s->bus);
-#ifdef DEBUG_IDE_ATAPI
-            printf("status=0x%x\n", s->status);
-#endif
+            trace_ide_atapi_cmd_reply_end_new(s, s->status);
         }
     }
 }
@@ -368,9 +352,7 @@ static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
 
 static void ide_atapi_cmd_check_status(IDEState *s)
 {
-#ifdef DEBUG_IDE_ATAPI
-    printf("atapi_cmd_check_status\n");
-#endif
+    trace_ide_atapi_cmd_check_status(s);
     s->error = MC_ERR | (UNIT_ATTENTION << 4);
     s->status = ERR_STAT;
     s->nsector = 0;
@@ -477,10 +459,8 @@ static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
 static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
                                int sector_size)
 {
-#ifdef DEBUG_IDE_ATAPI
-    printf("read %s: LBA=%d nb_sectors=%d\n", s->atapi_dma ? "dma" : "pio",
-        lba, nb_sectors);
-#endif
+    trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
+                             lba, nb_sectors);
     if (s->atapi_dma) {
         ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
     } else {
@@ -1330,16 +1310,18 @@ void ide_atapi_cmd(IDEState *s)
     uint8_t *buf = s->io_buffer;
     const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
 
-#ifdef DEBUG_IDE_ATAPI
-    {
+    trace_ide_atapi_cmd(s, s->io_buffer[0]);
+
+    if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
+        /* Each pretty-printed byte needs two bytes and a space; */
+        char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
         int i;
-        printf("ATAPI limit=0x%x packet:", s->lcyl | (s->hcyl << 8));
-        for(i = 0; i < ATAPI_PACKET_SIZE; i++) {
-            printf(" %02x", buf[i]);
+        for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
+            sprintf(ppacket + (i * 3), "%02x ", buf[i]);
         }
-        printf("\n");
+        trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
+        g_free(ppacket);
     }
-#endif
 
     /*
      * If there's a UNIT_ATTENTION condition pending, only command flagged with