i2c:smbus: Simplify write operation

There were two different write functions and the SMBus code kept
track of the command.

Keeping track of the command wasn't useful, in fact it wasn't quite
correct for the eeprom_smbus code.  And there is no need for two write
functions.  Just have one write function and the first byte in the
buffer is the command.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

2 files changed, 21 insertions, 51 deletions

diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c
index c8f6f4b442..7fbb5ca27f 100644
--- a/hw/i2c/smbus_eeprom.c
+++ b/hw/i2c/smbus_eeprom.c
@@ -45,16 +45,6 @@ static void eeprom_quick_cmd(SMBusDevice *dev, uint8_t read)
 #endif
 }
 
-static void eeprom_send_byte(SMBusDevice *dev, uint8_t val)
-{
-    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
-#ifdef DEBUG
-    printf("eeprom_send_byte: addr=0x%02x val=0x%02x\n",
-           dev->i2c.address, val);
-#endif
-    eeprom->offset = val;
-}
-
 static uint8_t eeprom_receive_byte(SMBusDevice *dev)
 {
     SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
@@ -67,34 +57,30 @@ static uint8_t eeprom_receive_byte(SMBusDevice *dev)
     return val;
 }
 
-static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len)
+static int eeprom_write_data(SMBusDevice *dev, uint8_t *buf, uint8_t len)
 {
     SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
-    int n;
+    uint8_t *data = eeprom->data;
+
 #ifdef DEBUG
     printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",
-           dev->i2c.address, cmd, buf[0]);
+           dev->i2c.address, buf[0], buf[1]);
 #endif
-    /* A page write operation is not a valid SMBus command.
-       It is a block write without a length byte.  Fortunately we
-       get the full block anyway.  */
-    /* TODO: Should this set the current location?  */
-    if (cmd + len > 256)
-        n = 256 - cmd;
-    else
-        n = len;
-    memcpy(eeprom->data + cmd, buf, n);
-    len -= n;
-    if (len)
-        memcpy(eeprom->data, buf + n, len);
+    /* len is guaranteed to be > 0 */
+    eeprom->offset = buf[0];
+    buf++;
+    len--;
+
+    for (; len > 0; len--) {
+        data[eeprom->offset] = *buf++;
+        eeprom->offset = (eeprom->offset + 1) % 256;
+    }
+
+    return 0;
 }
 
-static uint8_t eeprom_read_data(SMBusDevice *dev, uint8_t cmd, int n)
+static uint8_t eeprom_read_data(SMBusDevice *dev, int n)
 {
-    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
-    /* If this is the first byte then set the current position.  */
-    if (n == 0)
-        eeprom->offset = cmd;
     /* As with writes, we implement block reads without the
        SMBus length byte.  */
     return eeprom_receive_byte(dev);
@@ -119,7 +105,6 @@ static void smbus_eeprom_class_initfn(ObjectClass *klass, void *data)
 
     dc->realize = smbus_eeprom_realize;
     sc->quick_cmd = eeprom_quick_cmd;
-    sc->send_byte = eeprom_send_byte;
     sc->receive_byte = eeprom_receive_byte;
     sc->write_data = eeprom_write_data;
     sc->read_data = eeprom_read_data;
diff --git a/hw/i2c/smbus_slave.c b/hw/i2c/smbus_slave.c
index 6a89a286e3..92c7a5086c 100644
--- a/hw/i2c/smbus_slave.c
+++ b/hw/i2c/smbus_slave.c
@@ -54,18 +54,9 @@ static void smbus_do_write(SMBusDevice *dev)
 {
     SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev);
 
-    if (dev->data_len == 1) {
-        DPRINTF("Send Byte\n");
-        if (sc->send_byte) {
-            sc->send_byte(dev, dev->data_buf[0]);
-        }
-    } else {
-        dev->command = dev->data_buf[0];
-        DPRINTF("Command %d len %d\n", dev->command, dev->data_len - 1);
-        if (sc->write_data) {
-            sc->write_data(dev, dev->command, dev->data_buf + 1,
-                           dev->data_len - 1);
-        }
+    DPRINTF("Command %d len %d\n", dev->data_buf[0], dev->data_len);
+    if (sc->write_data) {
+        sc->write_data(dev, dev->data_buf, dev->data_len);
     }
 }
 
@@ -98,13 +89,7 @@ static int smbus_i2c_event(I2CSlave *s, enum i2c_event event)
                 BADF("Read after write with no data\n");
                 dev->mode = SMBUS_CONFUSED;
             } else {
-                if (dev->data_len > 1) {
-                    smbus_do_write(dev);
-                } else {
-                    dev->command = dev->data_buf[0];
-                    DPRINTF("%02x: Command %d\n", dev->i2c.address,
-                            dev->command);
-                }
+                smbus_do_write(dev);
                 DPRINTF("Read mode\n");
                 dev->data_len = 0;
                 dev->mode = SMBUS_READ_DATA;
@@ -177,7 +162,7 @@ static uint8_t smbus_i2c_recv(I2CSlave *s)
         break;
     case SMBUS_READ_DATA:
         if (sc->read_data) {
-            ret = sc->read_data(dev, dev->command, dev->data_len);
+            ret = sc->read_data(dev, dev->data_len);
             dev->data_len++;
         } else {
             ret = 0;