aboutsummaryrefslogtreecommitdiff
path: root/hw/etraxfs_timer.c
diff options
context:
space:
mode:
authoredgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>2008-06-09 23:33:30 +0000
committeredgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>2008-06-09 23:33:30 +0000
commit5ef98b4742a291c732080c313051b1b36da1707d (patch)
treefe5b289f5af9c9d378f894fc24cef88b2e2d076c /hw/etraxfs_timer.c
parent1b1a38b0aaf3a24b9b8162d8aef9e700a42f8d43 (diff)
ETRAX: Add NMI support to the watchdog and the interrupt controller.
* Add NMI and GURU exceptions to teh interrupt controller. * Teach the watchdog timer to signal an NMI before reseting the chip. * Add etraxfs.h to hold api for etrax device models. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4720 c046a42c-6fe2-441c-8c8c-71466251a162
Diffstat (limited to 'hw/etraxfs_timer.c')
-rw-r--r--hw/etraxfs_timer.c29
1 files changed, 25 insertions, 4 deletions
diff --git a/hw/etraxfs_timer.c b/hw/etraxfs_timer.c
index 7353d45dec..e996c57f6a 100644
--- a/hw/etraxfs_timer.c
+++ b/hw/etraxfs_timer.c
@@ -46,6 +46,7 @@
struct fs_timer_t {
CPUState *env;
qemu_irq *irq;
+ qemu_irq *nmi;
target_phys_addr_t base;
QEMUBH *bh_t0;
@@ -56,6 +57,8 @@ struct fs_timer_t {
ptimer_state *ptimer_wd;
struct timeval last;
+ int wd_hits;
+
/* Control registers. */
uint32_t rw_tmr0_div;
uint32_t r_tmr0_data;
@@ -129,6 +132,7 @@ static void update_ctrl(struct fs_timer_t *t, int tnum)
unsigned int freq_hz;
unsigned int div;
uint32_t ctrl;
+
ptimer_state *timer;
if (tnum == 0) {
@@ -163,8 +167,8 @@ static void update_ctrl(struct fs_timer_t *t, int tnum)
D(printf ("freq_hz=%d div=%d\n", freq_hz, div));
div = div * TIMER_SLOWDOWN;
- div >>= 15;
- freq_hz >>= 15;
+ div >>= 10;
+ freq_hz >>= 10;
ptimer_set_freq(timer, freq_hz);
ptimer_set_limit(timer, div, 0);
@@ -216,7 +220,18 @@ static void timer1_hit(void *opaque)
static void watchdog_hit(void *opaque)
{
- qemu_system_reset_request();
+ struct fs_timer_t *t = opaque;
+ if (t->wd_hits == 0) {
+ /* real hw gives a single tick before reseting but we are
+ a bit friendlier to compensate for our slower execution. */
+ ptimer_set_count(t->ptimer_wd, 10);
+ ptimer_run(t->ptimer_wd, 1);
+ qemu_irq_raise(t->nmi[0]);
+ }
+ else
+ qemu_system_reset_request();
+
+ t->wd_hits++;
}
static inline void timer_watchdog_update(struct fs_timer_t *t, uint32_t value)
@@ -237,6 +252,11 @@ static inline void timer_watchdog_update(struct fs_timer_t *t, uint32_t value)
D(printf("en=%d new_key=%x oldkey=%x cmd=%d cnt=%d\n",
wd_en, new_key, wd_key, new_cmd, wd_cnt));
+ if (t->wd_hits)
+ qemu_irq_lower(t->nmi[0]);
+
+ t->wd_hits = 0;
+
ptimer_set_freq(t->ptimer_wd, 760);
if (wd_cnt == 0)
wd_cnt = 256;
@@ -320,7 +340,7 @@ static void etraxfs_timer_reset(void *opaque)
qemu_irq_lower(t->irq[0]);
}
-void etraxfs_timer_init(CPUState *env, qemu_irq *irqs,
+void etraxfs_timer_init(CPUState *env, qemu_irq *irqs, qemu_irq *nmi,
target_phys_addr_t base)
{
static struct fs_timer_t *t;
@@ -337,6 +357,7 @@ void etraxfs_timer_init(CPUState *env, qemu_irq *irqs,
t->ptimer_t1 = ptimer_init(t->bh_t1);
t->ptimer_wd = ptimer_init(t->bh_wd);
t->irq = irqs;
+ t->nmi = nmi;
t->env = env;
t->base = base;