hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 132 deletions

diff --git a/hw/esp.h b/hw/esp.h
deleted file mode 100644
index 830673be8f..0000000000
--- a/hw/esp.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef QEMU_HW_ESP_H
-#define QEMU_HW_ESP_H
-
-#include "hw/scsi.h"
-
-/* esp.c */
-#define ESP_MAX_DEVS 7
-typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
-void esp_init(hwaddr espaddr, int it_shift,
-              ESPDMAMemoryReadWriteFunc dma_memory_read,
-              ESPDMAMemoryReadWriteFunc dma_memory_write,
-              void *dma_opaque, qemu_irq irq, qemu_irq *reset,
-              qemu_irq *dma_enable);
-
-#define ESP_REGS 16
-#define TI_BUFSZ 16
-
-typedef struct ESPState ESPState;
-
-struct ESPState {
-    uint8_t rregs[ESP_REGS];
-    uint8_t wregs[ESP_REGS];
-    qemu_irq irq;
-    uint8_t chip_id;
-    int32_t ti_size;
-    uint32_t ti_rptr, ti_wptr;
-    uint32_t status;
-    uint32_t dma;
-    uint8_t ti_buf[TI_BUFSZ];
-    SCSIBus bus;
-    SCSIDevice *current_dev;
-    SCSIRequest *current_req;
-    uint8_t cmdbuf[TI_BUFSZ];
-    uint32_t cmdlen;
-    uint32_t do_cmd;
-
-    /* The amount of data left in the current DMA transfer.  */
-    uint32_t dma_left;
-    /* The size of the current DMA transfer.  Zero if no transfer is in
-       progress.  */
-    uint32_t dma_counter;
-    int dma_enabled;
-
-    uint32_t async_len;
-    uint8_t *async_buf;
-
-    ESPDMAMemoryReadWriteFunc dma_memory_read;
-    ESPDMAMemoryReadWriteFunc dma_memory_write;
-    void *dma_opaque;
-    void (*dma_cb)(ESPState *s);
-};
-
-#define ESP_TCLO   0x0
-#define ESP_TCMID  0x1
-#define ESP_FIFO   0x2
-#define ESP_CMD    0x3
-#define ESP_RSTAT  0x4
-#define ESP_WBUSID 0x4
-#define ESP_RINTR  0x5
-#define ESP_WSEL   0x5
-#define ESP_RSEQ   0x6
-#define ESP_WSYNTP 0x6
-#define ESP_RFLAGS 0x7
-#define ESP_WSYNO  0x7
-#define ESP_CFG1   0x8
-#define ESP_RRES1  0x9
-#define ESP_WCCF   0x9
-#define ESP_RRES2  0xa
-#define ESP_WTEST  0xa
-#define ESP_CFG2   0xb
-#define ESP_CFG3   0xc
-#define ESP_RES3   0xd
-#define ESP_TCHI   0xe
-#define ESP_RES4   0xf
-
-#define CMD_DMA 0x80
-#define CMD_CMD 0x7f
-
-#define CMD_NOP      0x00
-#define CMD_FLUSH    0x01
-#define CMD_RESET    0x02
-#define CMD_BUSRESET 0x03
-#define CMD_TI       0x10
-#define CMD_ICCS     0x11
-#define CMD_MSGACC   0x12
-#define CMD_PAD      0x18
-#define CMD_SATN     0x1a
-#define CMD_RSTATN   0x1b
-#define CMD_SEL      0x41
-#define CMD_SELATN   0x42
-#define CMD_SELATNS  0x43
-#define CMD_ENSEL    0x44
-#define CMD_DISSEL   0x45
-
-#define STAT_DO 0x00
-#define STAT_DI 0x01
-#define STAT_CD 0x02
-#define STAT_ST 0x03
-#define STAT_MO 0x06
-#define STAT_MI 0x07
-#define STAT_PIO_MASK 0x06
-
-#define STAT_TC 0x10
-#define STAT_PE 0x20
-#define STAT_GE 0x40
-#define STAT_INT 0x80
-
-#define BUSID_DID 0x07
-
-#define INTR_FC 0x08
-#define INTR_BS 0x10
-#define INTR_DC 0x20
-#define INTR_RST 0x80
-
-#define SEQ_0 0x0
-#define SEQ_CD 0x4
-
-#define CFG1_RESREPT 0x40
-
-#define TCHI_FAS100A 0x4
-#define TCHI_AM53C974 0x12
-
-void esp_dma_enable(ESPState *s, int irq, int level);
-void esp_request_cancelled(SCSIRequest *req);
-void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid);
-void esp_transfer_data(SCSIRequest *req, uint32_t len);
-void esp_hard_reset(ESPState *s);
-uint64_t esp_reg_read(ESPState *s, uint32_t saddr);
-void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val);
-extern const VMStateDescription vmstate_esp;
-
-#endif