virtio-pci: disable vring processing when bus-mastering is disabled

Currently the SLOF firmware for pseries guests will disable/re-enable
a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it tends to
work with a single device at a time at various stages like probing
and running block/network bootloaders without doing a full reset
in-between.

In QEMU, when PCI_COMMAND_MASTER is disabled we disable the
corresponding IOMMU memory region, so DMA accesses (including to vring
fields like idx/flags) will no longer undergo the necessary
translation. Normally we wouldn't expect this to happen since it would
be misbehavior on the driver side to continue driving DMA requests.

However, in the case of pseries, with iommu_platform=on, we trigger the
following sequence when tearing down the virtio-blk dataplane ioeventfd
in response to the guest unsetting PCI_COMMAND_MASTER:

  #2  0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757
  #3  0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950
  #4  0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0)
      at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255
  #5  0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660)
      at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776
  #6  0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550
  #7  0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546
  #8  0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527
  #9  0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8)
      at /home/mdroth/w/qemu.git/util/aio-posix.c:520
  #10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0)
      at /home/mdroth/w/qemu.git/util/aio-posix.c:607
  #11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true)
      at /home/mdroth/w/qemu.git/util/aio-posix.c:639
  #12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0)
      at /home/mdroth/w/qemu.git/util/aio-wait.c:71
  #13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>)
      at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288
  #14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245
  #15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237
  #16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292
  #17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>)
      at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613

I.e. the calling code is only scheduling a one-shot BH for
virtio_blk_data_plane_stop_bh, but somehow we end up trying to process
an additional virtqueue entry before we get there. This is likely due
to the following check in virtio_queue_host_notifier_aio_poll:

  static bool virtio_queue_host_notifier_aio_poll(void *opaque)
  {
      EventNotifier *n = opaque;
      VirtQueue *vq = container_of(n, VirtQueue, host_notifier);
      bool progress;

      if (!vq->vring.desc || virtio_queue_empty(vq)) {
          return false;
      }

      progress = virtio_queue_notify_aio_vq(vq);

namely the call to virtio_queue_empty(). In this case, since no new
requests have actually been issued, shadow_avail_idx == last_avail_idx,
so we actually try to access the vring via vring_avail_idx() to get
the latest non-shadowed idx:

  int virtio_queue_empty(VirtQueue *vq)
  {
      bool empty;
      ...

      if (vq->shadow_avail_idx != vq->last_avail_idx) {
          return 0;
      }

      rcu_read_lock();
      empty = vring_avail_idx(vq) == vq->last_avail_idx;
      rcu_read_unlock();
      return empty;

but since the IOMMU region has been disabled we get a bogus value (0
usually), which causes virtio_queue_empty() to falsely report that
there are entries to be processed, which causes errors such as:

  "virtio: zero sized buffers are not allowed"

or

  "virtio-blk missing headers"

and puts the device in an error state.

This patch works around the issue by introducing virtio_set_disabled(),
which sets a 'disabled' flag to bypass checks like virtio_queue_empty()
when bus-mastering is disabled. Since we'd check this flag at all the
same sites as vdev->broken, we replace those checks with an inline
function which checks for either vdev->broken or vdev->disabled.

The 'disabled' flag is only migrated when set, which should be fairly
rare, but to maintain migration compatibility we disable it's use for
older machine types. Users requiring the use of the flag in conjunction
with older machine types can set it explicitly as a virtio-device
option.

NOTES:

 - This leaves some other oddities in play, like the fact that
   DRIVER_OK also gets unset in response to bus-mastering being
   disabled, but not restored (however the device seems to continue
   working)
 - Similarly, we disable the host notifier via
   virtio_bus_stop_ioeventfd(), which seems to move the handling out
   of virtio-blk dataplane and back into the main IO thread, and it
   ends up staying there till a reset (but otherwise continues working
   normally)

Cc: David Gibson <david@gibson.dropbear.id.au>,
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/hw/core/machine.c b/hw/core/machine.c
index 56137e9bf0..0854dcebdd 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -34,6 +34,7 @@ const size_t hw_compat_4_2_len = G_N_ELEMENTS(hw_compat_4_2);
 
 GlobalProperty hw_compat_4_1[] = {
     { "virtio-pci", "x-pcie-flr-init", "off" },
+    { "virtio-device", "use-disabled-flag", "false" },
 };
 const size_t hw_compat_4_1_len = G_N_ELEMENTS(hw_compat_4_1);