hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 330 insertions, 0 deletions

diff --git a/hw/char/pl011.c b/hw/char/pl011.c
new file mode 100644
index 0000000000..332d5b970c
--- /dev/null
+++ b/hw/char/pl011.c
@@ -0,0 +1,330 @@
+/*
+ * Arm PrimeCell PL011 UART
+ *
+ * Copyright (c) 2006 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL.
+ */
+
+#include "hw/sysbus.h"
+#include "char/char.h"
+
+typedef struct {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    uint32_t readbuff;
+    uint32_t flags;
+    uint32_t lcr;
+    uint32_t cr;
+    uint32_t dmacr;
+    uint32_t int_enabled;
+    uint32_t int_level;
+    uint32_t read_fifo[16];
+    uint32_t ilpr;
+    uint32_t ibrd;
+    uint32_t fbrd;
+    uint32_t ifl;
+    int read_pos;
+    int read_count;
+    int read_trigger;
+    CharDriverState *chr;
+    qemu_irq irq;
+    const unsigned char *id;
+} pl011_state;
+
+#define PL011_INT_TX 0x20
+#define PL011_INT_RX 0x10
+
+#define PL011_FLAG_TXFE 0x80
+#define PL011_FLAG_RXFF 0x40
+#define PL011_FLAG_TXFF 0x20
+#define PL011_FLAG_RXFE 0x10
+
+static const unsigned char pl011_id_arm[8] =
+  { 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+static const unsigned char pl011_id_luminary[8] =
+  { 0x11, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
+
+static void pl011_update(pl011_state *s)
+{
+    uint32_t flags;
+
+    flags = s->int_level & s->int_enabled;
+    qemu_set_irq(s->irq, flags != 0);
+}
+
+static uint64_t pl011_read(void *opaque, hwaddr offset,
+                           unsigned size)
+{
+    pl011_state *s = (pl011_state *)opaque;
+    uint32_t c;
+
+    if (offset >= 0xfe0 && offset < 0x1000) {
+        return s->id[(offset - 0xfe0) >> 2];
+    }
+    switch (offset >> 2) {
+    case 0: /* UARTDR */
+        s->flags &= ~PL011_FLAG_RXFF;
+        c = s->read_fifo[s->read_pos];
+        if (s->read_count > 0) {
+            s->read_count--;
+            if (++s->read_pos == 16)
+                s->read_pos = 0;
+        }
+        if (s->read_count == 0) {
+            s->flags |= PL011_FLAG_RXFE;
+        }
+        if (s->read_count == s->read_trigger - 1)
+            s->int_level &= ~ PL011_INT_RX;
+        pl011_update(s);
+        if (s->chr) {
+            qemu_chr_accept_input(s->chr);
+        }
+        return c;
+    case 1: /* UARTCR */
+        return 0;
+    case 6: /* UARTFR */
+        return s->flags;
+    case 8: /* UARTILPR */
+        return s->ilpr;
+    case 9: /* UARTIBRD */
+        return s->ibrd;
+    case 10: /* UARTFBRD */
+        return s->fbrd;
+    case 11: /* UARTLCR_H */
+        return s->lcr;
+    case 12: /* UARTCR */
+        return s->cr;
+    case 13: /* UARTIFLS */
+        return s->ifl;
+    case 14: /* UARTIMSC */
+        return s->int_enabled;
+    case 15: /* UARTRIS */
+        return s->int_level;
+    case 16: /* UARTMIS */
+        return s->int_level & s->int_enabled;
+    case 18: /* UARTDMACR */
+        return s->dmacr;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl011_read: Bad offset %x\n", (int)offset);
+        return 0;
+    }
+}
+
+static void pl011_set_read_trigger(pl011_state *s)
+{
+#if 0
+    /* The docs say the RX interrupt is triggered when the FIFO exceeds
+       the threshold.  However linux only reads the FIFO in response to an
+       interrupt.  Triggering the interrupt when the FIFO is non-empty seems
+       to make things work.  */
+    if (s->lcr & 0x10)
+        s->read_trigger = (s->ifl >> 1) & 0x1c;
+    else
+#endif
+        s->read_trigger = 1;
+}
+
+static void pl011_write(void *opaque, hwaddr offset,
+                        uint64_t value, unsigned size)
+{
+    pl011_state *s = (pl011_state *)opaque;
+    unsigned char ch;
+
+    switch (offset >> 2) {
+    case 0: /* UARTDR */
+        /* ??? Check if transmitter is enabled.  */
+        ch = value;
+        if (s->chr)
+            qemu_chr_fe_write(s->chr, &ch, 1);
+        s->int_level |= PL011_INT_TX;
+        pl011_update(s);
+        break;
+    case 1: /* UARTCR */
+        s->cr = value;
+        break;
+    case 6: /* UARTFR */
+        /* Writes to Flag register are ignored.  */
+        break;
+    case 8: /* UARTUARTILPR */
+        s->ilpr = value;
+        break;
+    case 9: /* UARTIBRD */
+        s->ibrd = value;
+        break;
+    case 10: /* UARTFBRD */
+        s->fbrd = value;
+        break;
+    case 11: /* UARTLCR_H */
+        s->lcr = value;
+        pl011_set_read_trigger(s);
+        break;
+    case 12: /* UARTCR */
+        /* ??? Need to implement the enable and loopback bits.  */
+        s->cr = value;
+        break;
+    case 13: /* UARTIFS */
+        s->ifl = value;
+        pl011_set_read_trigger(s);
+        break;
+    case 14: /* UARTIMSC */
+        s->int_enabled = value;
+        pl011_update(s);
+        break;
+    case 17: /* UARTICR */
+        s->int_level &= ~value;
+        pl011_update(s);
+        break;
+    case 18: /* UARTDMACR */
+        s->dmacr = value;
+        if (value & 3) {
+            qemu_log_mask(LOG_UNIMP, "pl011: DMA not implemented\n");
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl011_write: Bad offset %x\n", (int)offset);
+    }
+}
+
+static int pl011_can_receive(void *opaque)
+{
+    pl011_state *s = (pl011_state *)opaque;
+
+    if (s->lcr & 0x10)
+        return s->read_count < 16;
+    else
+        return s->read_count < 1;
+}
+
+static void pl011_put_fifo(void *opaque, uint32_t value)
+{
+    pl011_state *s = (pl011_state *)opaque;
+    int slot;
+
+    slot = s->read_pos + s->read_count;
+    if (slot >= 16)
+        slot -= 16;
+    s->read_fifo[slot] = value;
+    s->read_count++;
+    s->flags &= ~PL011_FLAG_RXFE;
+    if (s->cr & 0x10 || s->read_count == 16) {
+        s->flags |= PL011_FLAG_RXFF;
+    }
+    if (s->read_count == s->read_trigger) {
+        s->int_level |= PL011_INT_RX;
+        pl011_update(s);
+    }
+}
+
+static void pl011_receive(void *opaque, const uint8_t *buf, int size)
+{
+    pl011_put_fifo(opaque, *buf);
+}
+
+static void pl011_event(void *opaque, int event)
+{
+    if (event == CHR_EVENT_BREAK)
+        pl011_put_fifo(opaque, 0x400);
+}
+
+static const MemoryRegionOps pl011_ops = {
+    .read = pl011_read,
+    .write = pl011_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_pl011 = {
+    .name = "pl011",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_UINT32(readbuff, pl011_state),
+        VMSTATE_UINT32(flags, pl011_state),
+        VMSTATE_UINT32(lcr, pl011_state),
+        VMSTATE_UINT32(cr, pl011_state),
+        VMSTATE_UINT32(dmacr, pl011_state),
+        VMSTATE_UINT32(int_enabled, pl011_state),
+        VMSTATE_UINT32(int_level, pl011_state),
+        VMSTATE_UINT32_ARRAY(read_fifo, pl011_state, 16),
+        VMSTATE_UINT32(ilpr, pl011_state),
+        VMSTATE_UINT32(ibrd, pl011_state),
+        VMSTATE_UINT32(fbrd, pl011_state),
+        VMSTATE_UINT32(ifl, pl011_state),
+        VMSTATE_INT32(read_pos, pl011_state),
+        VMSTATE_INT32(read_count, pl011_state),
+        VMSTATE_INT32(read_trigger, pl011_state),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static int pl011_init(SysBusDevice *dev, const unsigned char *id)
+{
+    pl011_state *s = FROM_SYSBUS(pl011_state, dev);
+
+    memory_region_init_io(&s->iomem, &pl011_ops, s, "pl011", 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    sysbus_init_irq(dev, &s->irq);
+    s->id = id;
+    s->chr = qemu_char_get_next_serial();
+
+    s->read_trigger = 1;
+    s->ifl = 0x12;
+    s->cr = 0x300;
+    s->flags = 0x90;
+    if (s->chr) {
+        qemu_chr_add_handlers(s->chr, pl011_can_receive, pl011_receive,
+                              pl011_event, s);
+    }
+    vmstate_register(&dev->qdev, -1, &vmstate_pl011, s);
+    return 0;
+}
+
+static int pl011_arm_init(SysBusDevice *dev)
+{
+    return pl011_init(dev, pl011_id_arm);
+}
+
+static int pl011_luminary_init(SysBusDevice *dev)
+{
+    return pl011_init(dev, pl011_id_luminary);
+}
+
+static void pl011_arm_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+    sdc->init = pl011_arm_init;
+}
+
+static const TypeInfo pl011_arm_info = {
+    .name          = "pl011",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl011_state),
+    .class_init    = pl011_arm_class_init,
+};
+
+static void pl011_luminary_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+    sdc->init = pl011_luminary_init;
+}
+
+static const TypeInfo pl011_luminary_info = {
+    .name          = "pl011_luminary",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl011_state),
+    .class_init    = pl011_luminary_class_init,
+};
+
+static void pl011_register_types(void)
+{
+    type_register_static(&pl011_arm_info);
+    type_register_static(&pl011_luminary_info);
+}
+
+type_init(pl011_register_types)