escc: introduce escc_hard_reset_chn() for hardware reset

This new hardware reset function is to be called for both channels when the
hardware reset bit is written to register WR9. Its initial implementation is
the same as the existing escc_reset_chn() function used for device reset.

Add a new trace event when the guest initiates a hard reset via the WR9 register
to help diagnose guest reset issues.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210903113223.19551-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

1 files changed, 37 insertions, 1 deletions

diff --git a/hw/char/escc.c b/hw/char/escc.c
index 697f15f383..806f593738 100644
--- a/hw/char/escc.c
+++ b/hw/char/escc.c
@@ -331,6 +331,40 @@ static void escc_soft_reset_chn(ESCCChannelState *s)
     clear_queue(s);
 }
 
+static void escc_hard_reset_chn(ESCCChannelState *s)
+{
+    int i;
+
+    s->reg = 0;
+    for (i = 0; i < ESCC_SERIAL_REGS; i++) {
+        s->rregs[i] = 0;
+        s->wregs[i] = 0;
+    }
+    /* 1X divisor, 1 stop bit, no parity */
+    s->wregs[W_TXCTRL1] = TXCTRL1_1STOP;
+    s->wregs[W_MINTR] = MINTR_RST_ALL;
+    /* Synch mode tx clock = TRxC */
+    s->wregs[W_CLOCK] = CLOCK_TRXC;
+    /* PLL disabled */
+    s->wregs[W_MISC2] = MISC2_PLLDIS;
+    /* Enable most interrupts */
+    s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT |
+                         EXTINT_TXUNDRN | EXTINT_BRKINT;
+    if (s->disabled) {
+        s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC |
+                             STATUS_CTS | STATUS_TXUNDRN;
+    } else {
+        s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN;
+    }
+    s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT;
+
+    s->rx = s->tx = 0;
+    s->rxint = s->txint = 0;
+    s->rxint_under_svc = s->txint_under_svc = 0;
+    s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0;
+    clear_queue(s);
+}
+
 static void escc_reset(DeviceState *d)
 {
     ESCCState *s = ESCC(d);
@@ -589,7 +623,9 @@ static void escc_mem_write(void *opaque, hwaddr addr,
                 escc_soft_reset_chn(&serial->chn[1]);
                 return;
             case MINTR_RST_ALL:
-                escc_reset(DEVICE(serial));
+                trace_escc_hard_reset();
+                escc_hard_reset_chn(&serial->chn[0]);
+                escc_hard_reset_chn(&serial->chn[1]);
                 return;
             }
             break;