hw/char/cadence_uart: add clock support

Switch the cadence uart to multi-phase reset and add the
reference clock input.

The input clock frequency is added to the migration structure.

The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.

If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 63 insertions, 10 deletions

diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 22e47972f1..e196906c92 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -31,6 +31,8 @@
 #include "qemu/module.h"
 #include "hw/char/cadence_uart.h"
 #include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "trace.h"
 
 #ifdef CADENCE_UART_ERR_DEBUG
 #define DB_PRINT(...) do { \
@@ -97,7 +99,7 @@
 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 
-#define UART_INPUT_CLK         50000000
+#define UART_DEFAULT_REF_CLK (50 * 1000 * 1000)
 
 #define R_CR       (0x00/4)
 #define R_MR       (0x04/4)
@@ -171,12 +173,15 @@ static void uart_send_breaks(CadenceUARTState *s)
 static void uart_parameters_setup(CadenceUARTState *s)
 {
     QEMUSerialSetParams ssp;
-    unsigned int baud_rate, packet_size;
+    unsigned int baud_rate, packet_size, input_clk;
+    input_clk = clock_get_hz(s->refclk);
 
-    baud_rate = (s->r[R_MR] & UART_MR_CLKS) ?
-            UART_INPUT_CLK / 8 : UART_INPUT_CLK;
+    baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? input_clk / 8 : input_clk;
+    baud_rate /= (s->r[R_BRGR] * (s->r[R_BDIV] + 1));
+    trace_cadence_uart_baudrate(baud_rate);
+
+    ssp.speed = baud_rate;
 
-    ssp.speed = baud_rate / (s->r[R_BRGR] * (s->r[R_BDIV] + 1));
     packet_size = 1;
 
     switch (s->r[R_MR] & UART_MR_PAR) {
@@ -215,6 +220,13 @@ static void uart_parameters_setup(CadenceUARTState *s)
     }
 
     packet_size += ssp.data_bits + ssp.stop_bits;
+    if (ssp.speed == 0) {
+        /*
+         * Avoid division-by-zero below.
+         * TODO: find something better
+         */
+        ssp.speed = 1;
+    }
     s->char_tx_time = (NANOSECONDS_PER_SECOND / ssp.speed) * packet_size;
     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 }
@@ -340,6 +352,11 @@ static void uart_receive(void *opaque, const uint8_t *buf, int size)
     CadenceUARTState *s = opaque;
     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 
+    /* ignore characters when unclocked or in reset */
+    if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+        return;
+    }
+
     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
         uart_write_rx_fifo(opaque, buf, size);
     }
@@ -353,6 +370,11 @@ static void uart_event(void *opaque, QEMUChrEvent event)
     CadenceUARTState *s = opaque;
     uint8_t buf = '\0';
 
+    /* ignore characters when unclocked or in reset */
+    if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+        return;
+    }
+
     if (event == CHR_EVENT_BREAK) {
         uart_write_rx_fifo(opaque, &buf, 1);
     }
@@ -462,9 +484,9 @@ static const MemoryRegionOps uart_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void cadence_uart_reset(DeviceState *dev)
+static void cadence_uart_reset_init(Object *obj, ResetType type)
 {
-    CadenceUARTState *s = CADENCE_UART(dev);
+    CadenceUARTState *s = CADENCE_UART(obj);
 
     s->r[R_CR] = 0x00000128;
     s->r[R_IMR] = 0;
@@ -473,6 +495,11 @@ static void cadence_uart_reset(DeviceState *dev)
     s->r[R_BRGR] = 0x0000028B;
     s->r[R_BDIV] = 0x0000000F;
     s->r[R_TTRIG] = 0x00000020;
+}
+
+static void cadence_uart_reset_hold(Object *obj)
+{
+    CadenceUARTState *s = CADENCE_UART(obj);
 
     uart_rx_reset(s);
     uart_tx_reset(s);
@@ -491,6 +518,14 @@ static void cadence_uart_realize(DeviceState *dev, Error **errp)
                              uart_event, NULL, s, NULL, true);
 }
 
+static void cadence_uart_refclk_update(void *opaque)
+{
+    CadenceUARTState *s = opaque;
+
+    /* recompute uart's speed on clock change */
+    uart_parameters_setup(s);
+}
+
 static void cadence_uart_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@@ -500,9 +535,23 @@ static void cadence_uart_init(Object *obj)
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq);
 
+    s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk",
+            cadence_uart_refclk_update, s);
+    /* initialize the frequency in case the clock remains unconnected */
+    clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
+
     s->char_tx_time = (NANOSECONDS_PER_SECOND / 9600) * 10;
 }
 
+static int cadence_uart_pre_load(void *opaque)
+{
+    CadenceUARTState *s = opaque;
+
+    /* the frequency will be overriden if the refclk field is present */
+    clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
+    return 0;
+}
+
 static int cadence_uart_post_load(void *opaque, int version_id)
 {
     CadenceUARTState *s = opaque;
@@ -521,8 +570,9 @@ static int cadence_uart_post_load(void *opaque, int version_id)
 
 static const VMStateDescription vmstate_cadence_uart = {
     .name = "cadence_uart",
-    .version_id = 2,
+    .version_id = 3,
     .minimum_version_id = 2,
+    .pre_load = cadence_uart_pre_load,
     .post_load = cadence_uart_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX),
@@ -534,8 +584,9 @@ static const VMStateDescription vmstate_cadence_uart = {
         VMSTATE_UINT32(tx_count, CadenceUARTState),
         VMSTATE_UINT32(rx_wpos, CadenceUARTState),
         VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState),
+        VMSTATE_CLOCK_V(refclk, CadenceUARTState, 3),
         VMSTATE_END_OF_LIST()
-    }
+    },
 };
 
 static Property cadence_uart_properties[] = {
@@ -546,10 +597,12 @@ static Property cadence_uart_properties[] = {
 static void cadence_uart_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
 
     dc->realize = cadence_uart_realize;
     dc->vmsd = &vmstate_cadence_uart;
-    dc->reset = cadence_uart_reset;
+    rc->phases.enter = cadence_uart_reset_init;
+    rc->phases.hold  = cadence_uart_reset_hold;
     device_class_set_props(dc, cadence_uart_properties);
   }