virtio-blk: add DISCARD and WRITE_ZEROES features

This patch adds the support of DISCARD and WRITE_ZEROES commands,
that have been introduced in the virtio-blk protocol to have
better performance when using SSD backend.

We support only one segment per request since multiple segments
are not widely used and there are no userspace APIs that allow
applications to submit multiple segments in a single call.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-7-sgarzare@redhat.com
Message-Id: <20190221103314.58500-7-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

1 files changed, 184 insertions, 0 deletions

diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 8798d13bc4..c159a3d5f7 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -169,6 +169,30 @@ out:
     aio_context_release(blk_get_aio_context(s->conf.conf.blk));
 }
 
+static void virtio_blk_discard_write_zeroes_complete(void *opaque, int ret)
+{
+    VirtIOBlockReq *req = opaque;
+    VirtIOBlock *s = req->dev;
+    bool is_write_zeroes = (virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type) &
+                            ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES;
+
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    if (ret) {
+        if (virtio_blk_handle_rw_error(req, -ret, false, is_write_zeroes)) {
+            goto out;
+        }
+    }
+
+    virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
+    if (is_write_zeroes) {
+        block_acct_done(blk_get_stats(s->blk), &req->acct);
+    }
+    virtio_blk_free_request(req);
+
+out:
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+}
+
 #ifdef __linux__
 
 typedef struct {
@@ -502,6 +526,84 @@ static bool virtio_blk_sect_range_ok(VirtIOBlock *dev,
     return true;
 }
 
+static uint8_t virtio_blk_handle_discard_write_zeroes(VirtIOBlockReq *req,
+    struct virtio_blk_discard_write_zeroes *dwz_hdr, bool is_write_zeroes)
+{
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    uint64_t sector;
+    uint32_t num_sectors, flags, max_sectors;
+    uint8_t err_status;
+    int bytes;
+
+    sector = virtio_ldq_p(vdev, &dwz_hdr->sector);
+    num_sectors = virtio_ldl_p(vdev, &dwz_hdr->num_sectors);
+    flags = virtio_ldl_p(vdev, &dwz_hdr->flags);
+    max_sectors = is_write_zeroes ? s->conf.max_write_zeroes_sectors :
+                  s->conf.max_discard_sectors;
+
+    /*
+     * max_sectors is at most BDRV_REQUEST_MAX_SECTORS, this check
+     * make us sure that "num_sectors << BDRV_SECTOR_BITS" can fit in
+     * the integer variable.
+     */
+    if (unlikely(num_sectors > max_sectors)) {
+        err_status = VIRTIO_BLK_S_IOERR;
+        goto err;
+    }
+
+    bytes = num_sectors << BDRV_SECTOR_BITS;
+
+    if (unlikely(!virtio_blk_sect_range_ok(s, sector, bytes))) {
+        err_status = VIRTIO_BLK_S_IOERR;
+        goto err;
+    }
+
+    /*
+     * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for discard
+     * and write zeroes commands if any unknown flag is set.
+     */
+    if (unlikely(flags & ~VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) {
+        err_status = VIRTIO_BLK_S_UNSUPP;
+        goto err;
+    }
+
+    if (is_write_zeroes) { /* VIRTIO_BLK_T_WRITE_ZEROES */
+        int blk_aio_flags = 0;
+
+        if (flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP) {
+            blk_aio_flags |= BDRV_REQ_MAY_UNMAP;
+        }
+
+        block_acct_start(blk_get_stats(s->blk), &req->acct, bytes,
+                         BLOCK_ACCT_WRITE);
+
+        blk_aio_pwrite_zeroes(s->blk, sector << BDRV_SECTOR_BITS,
+                              bytes, blk_aio_flags,
+                              virtio_blk_discard_write_zeroes_complete, req);
+    } else { /* VIRTIO_BLK_T_DISCARD */
+        /*
+         * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for
+         * discard commands if the unmap flag is set.
+         */
+        if (unlikely(flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) {
+            err_status = VIRTIO_BLK_S_UNSUPP;
+            goto err;
+        }
+
+        blk_aio_pdiscard(s->blk, sector << BDRV_SECTOR_BITS, bytes,
+                         virtio_blk_discard_write_zeroes_complete, req);
+    }
+
+    return VIRTIO_BLK_S_OK;
+
+err:
+    if (is_write_zeroes) {
+        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE);
+    }
+    return err_status;
+}
+
 static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
 {
     uint32_t type;
@@ -603,6 +705,47 @@ static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
         virtio_blk_free_request(req);
         break;
     }
+    /*
+     * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with
+     * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement,
+     * so we must mask it for these requests, then we will check if it is set.
+     */
+    case VIRTIO_BLK_T_DISCARD & ~VIRTIO_BLK_T_OUT:
+    case VIRTIO_BLK_T_WRITE_ZEROES & ~VIRTIO_BLK_T_OUT:
+    {
+        struct virtio_blk_discard_write_zeroes dwz_hdr;
+        size_t out_len = iov_size(out_iov, out_num);
+        bool is_write_zeroes = (type & ~VIRTIO_BLK_T_BARRIER) ==
+                               VIRTIO_BLK_T_WRITE_ZEROES;
+        uint8_t err_status;
+
+        /*
+         * Unsupported if VIRTIO_BLK_T_OUT is not set or the request contains
+         * more than one segment.
+         */
+        if (unlikely(!(type & VIRTIO_BLK_T_OUT) ||
+                     out_len > sizeof(dwz_hdr))) {
+            virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
+            virtio_blk_free_request(req);
+            return 0;
+        }
+
+        if (unlikely(iov_to_buf(out_iov, out_num, 0, &dwz_hdr,
+                                sizeof(dwz_hdr)) != sizeof(dwz_hdr))) {
+            virtio_error(vdev, "virtio-blk discard/write_zeroes header"
+                         " too short");
+            return -1;
+        }
+
+        err_status = virtio_blk_handle_discard_write_zeroes(req, &dwz_hdr,
+                                                            is_write_zeroes);
+        if (err_status != VIRTIO_BLK_S_OK) {
+            virtio_blk_req_complete(req, err_status);
+            virtio_blk_free_request(req);
+        }
+
+        break;
+    }
     default:
         virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
         virtio_blk_free_request(req);
@@ -782,6 +925,24 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
     blkcfg.alignment_offset = 0;
     blkcfg.wce = blk_enable_write_cache(s->blk);
     virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues);
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD)) {
+        virtio_stl_p(vdev, &blkcfg.max_discard_sectors,
+                     s->conf.max_discard_sectors);
+        virtio_stl_p(vdev, &blkcfg.discard_sector_alignment,
+                     blk_size >> BDRV_SECTOR_BITS);
+        /*
+         * We support only one segment per request since multiple segments
+         * are not widely used and there are no userspace APIs that allow
+         * applications to submit multiple segments in a single call.
+         */
+        virtio_stl_p(vdev, &blkcfg.max_discard_seg, 1);
+    }
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES)) {
+        virtio_stl_p(vdev, &blkcfg.max_write_zeroes_sectors,
+                     s->conf.max_write_zeroes_sectors);
+        blkcfg.write_zeroes_may_unmap = 1;
+        virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1);
+    }
     memcpy(config, &blkcfg, s->config_size);
 }
 
@@ -973,6 +1134,25 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
         return;
     }
 
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) &&
+        (!conf->max_discard_sectors ||
+         conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) {
+        error_setg(errp, "invalid max-discard-sectors property (%" PRIu32 ")"
+                   ", must be between 1 and %d",
+                   conf->max_discard_sectors, (int)BDRV_REQUEST_MAX_SECTORS);
+        return;
+    }
+
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES) &&
+        (!conf->max_write_zeroes_sectors ||
+         conf->max_write_zeroes_sectors > BDRV_REQUEST_MAX_SECTORS)) {
+        error_setg(errp, "invalid max-write-zeroes-sectors property (%" PRIu32
+                   "), must be between 1 and %d",
+                   conf->max_write_zeroes_sectors,
+                   (int)BDRV_REQUEST_MAX_SECTORS);
+        return;
+    }
+
     virtio_blk_set_config_size(s, s->host_features);
 
     virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK, s->config_size);
@@ -1050,6 +1230,10 @@ static Property virtio_blk_properties[] = {
                       VIRTIO_BLK_F_DISCARD, true),
     DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features,
                       VIRTIO_BLK_F_WRITE_ZEROES, true),
+    DEFINE_PROP_UINT32("max-discard-sectors", VirtIOBlock,
+                       conf.max_discard_sectors, BDRV_REQUEST_MAX_SECTORS),
+    DEFINE_PROP_UINT32("max-write-zeroes-sectors", VirtIOBlock,
+                       conf.max_write_zeroes_sectors, BDRV_REQUEST_MAX_SECTORS),
     DEFINE_PROP_END_OF_LIST(),
 };