aboutsummaryrefslogtreecommitdiff
path: root/hw/block
diff options
context:
space:
mode:
authorPeter Maydell <peter.maydell@linaro.org>2017-01-27 15:20:22 +0000
committerPeter Maydell <peter.maydell@linaro.org>2017-01-27 15:20:22 +0000
commitfeb0b1aa11f14ee71660aba46b46387d1f923c9e (patch)
treebfbea812e0b1b6c02413a89a2ae9c0527e4a639f /hw/block
parenta20ee6005564590d33eabec11ed4dc7c432db36b (diff)
pflash_cfi01: fix per-device sector length in CFI table
For configurations of the pflash_cfi01 device which set it up with a device-width not equal to the width (ie where we are emulating multiple narrow flash devices wired up in parallel), we were giving incorrect values in the CFI data table: (1) the sector length entry should specify the sector length for a single device, not the length for the overall collection of devices (2) the number of blocks per device must not be divided by the number of devices because the resulting device size would not match the overall size (3) this then means that the overall write block size must be modified depending on the number of devices because the entry is per device and when the guest writes into the flash it calculates the write size by using the CFI entry (write size per device) multiplied by the number of chips. (It would alternatively be possible to modify the write block size in the CFI table (currently hardcoded at 2048) and leave the overall write block size alone.) This commit corrects these bugs, and adds a hw-compat property to retain the old behaviour on 2.8 and earlier versions. (The only board we have which uses this sort of flash config and has machine versioning is the "virt" board -- the PC uses a single flash device and so behaviour is unaffected whether using old-multiple-chip-handling or not.) Here is a configuration example from the vexpress board: VEXPRESS_FLASH_SIZE = 64M VEXPRESS_FLASH_SECT_SIZE 256K num-blocks = VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE = 256 sector-length = 256K width = 4 device-width = 2 The code will fill the CFI entry with the following entries: num-blocks = 256 sector-length = 128K writeblock_size = 2048 This results in two chips, each with 256 * 128K = 32M device size and a write block size of 2048. A sector erase will be sent to both chips, thus 256K must be erased. When the guest sends a block write command, it will write 4096 bytes data at once (2048 per device). Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: cleaned up and expanded commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Diffstat (limited to 'hw/block')
-rw-r--r--hw/block/pflash_cfi01.c22
1 files changed, 17 insertions, 5 deletions
diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index 5f0ee9db00..71b98a3eef 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -99,6 +99,7 @@ struct pflash_t {
char *name;
void *storage;
VMChangeStateEntry *vmstate;
+ bool old_multiple_chip_handling;
};
static int pflash_post_load(void *opaque, int version_id);
@@ -703,7 +704,7 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
pflash_t *pfl = CFI_PFLASH01(dev);
uint64_t total_len;
int ret;
- uint64_t blocks_per_device, device_len;
+ uint64_t blocks_per_device, sector_len_per_device, device_len;
int num_devices;
Error *local_err = NULL;
@@ -726,8 +727,14 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
* in the cfi_table[].
*/
num_devices = pfl->device_width ? (pfl->bank_width / pfl->device_width) : 1;
- blocks_per_device = pfl->nb_blocs / num_devices;
- device_len = pfl->sector_len * blocks_per_device;
+ if (pfl->old_multiple_chip_handling) {
+ blocks_per_device = pfl->nb_blocs / num_devices;
+ sector_len_per_device = pfl->sector_len;
+ } else {
+ blocks_per_device = pfl->nb_blocs;
+ sector_len_per_device = pfl->sector_len / num_devices;
+ }
+ device_len = sector_len_per_device * blocks_per_device;
/* XXX: to be fixed */
#if 0
@@ -832,6 +839,9 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
pfl->cfi_table[0x2A] = 0x0B;
}
pfl->writeblock_size = 1 << pfl->cfi_table[0x2A];
+ if (!pfl->old_multiple_chip_handling && num_devices > 1) {
+ pfl->writeblock_size *= num_devices;
+ }
pfl->cfi_table[0x2B] = 0x00;
/* Number of erase block regions (uniform) */
@@ -839,8 +849,8 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
/* Erase block region 1 */
pfl->cfi_table[0x2D] = blocks_per_device - 1;
pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8;
- pfl->cfi_table[0x2F] = pfl->sector_len >> 8;
- pfl->cfi_table[0x30] = pfl->sector_len >> 16;
+ pfl->cfi_table[0x2F] = sector_len_per_device >> 8;
+ pfl->cfi_table[0x30] = sector_len_per_device >> 16;
/* Extended */
pfl->cfi_table[0x31] = 'P';
@@ -898,6 +908,8 @@ static Property pflash_cfi01_properties[] = {
DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0),
DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0),
DEFINE_PROP_STRING("name", struct pflash_t, name),
+ DEFINE_PROP_BOOL("old-multiple-chip-handling", struct pflash_t,
+ old_multiple_chip_handling, false),
DEFINE_PROP_END_OF_LIST(),
};