hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 366 deletions

diff --git a/hw/axis_dev88.c b/hw/axis_dev88.c
deleted file mode 100644
index eccd423abf..0000000000
--- a/hw/axis_dev88.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * QEMU model for the AXIS devboard 88.
- *
- * Copyright (c) 2009 Edgar E. Iglesias, Axis Communications AB.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "hw/sysbus.h"
-#include "net/net.h"
-#include "hw/flash.h"
-#include "hw/boards.h"
-#include "hw/etraxfs.h"
-#include "hw/loader.h"
-#include "elf.h"
-#include "hw/cris-boot.h"
-#include "sysemu/blockdev.h"
-#include "exec/address-spaces.h"
-
-#define D(x)
-#define DNAND(x)
-
-struct nand_state_t
-{
-    DeviceState *nand;
-    MemoryRegion iomem;
-    unsigned int rdy:1;
-    unsigned int ale:1;
-    unsigned int cle:1;
-    unsigned int ce:1;
-};
-
-static struct nand_state_t nand_state;
-static uint64_t nand_read(void *opaque, hwaddr addr, unsigned size)
-{
-    struct nand_state_t *s = opaque;
-    uint32_t r;
-    int rdy;
-
-    r = nand_getio(s->nand);
-    nand_getpins(s->nand, &rdy);
-    s->rdy = rdy;
-
-    DNAND(printf("%s addr=%x r=%x\n", __func__, addr, r));
-    return r;
-}
-
-static void
-nand_write(void *opaque, hwaddr addr, uint64_t value,
-           unsigned size)
-{
-    struct nand_state_t *s = opaque;
-    int rdy;
-
-    DNAND(printf("%s addr=%x v=%x\n", __func__, addr, (unsigned)value));
-    nand_setpins(s->nand, s->cle, s->ale, s->ce, 1, 0);
-    nand_setio(s->nand, value);
-    nand_getpins(s->nand, &rdy);
-    s->rdy = rdy;
-}
-
-static const MemoryRegionOps nand_ops = {
-    .read = nand_read,
-    .write = nand_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-struct tempsensor_t
-{
-    unsigned int shiftreg;
-    unsigned int count;
-    enum {
-        ST_OUT, ST_IN, ST_Z
-    } state;
-
-    uint16_t regs[3];
-};
-
-static void tempsensor_clkedge(struct tempsensor_t *s,
-                               unsigned int clk, unsigned int data_in)
-{
-    D(printf("%s clk=%d state=%d sr=%x\n", __func__,
-             clk, s->state, s->shiftreg));
-    if (s->count == 0) {
-        s->count = 16;
-        s->state = ST_OUT;
-    }
-    switch (s->state) {
-        case ST_OUT:
-            /* Output reg is clocked at negedge.  */
-            if (!clk) {
-                s->count--;
-                s->shiftreg <<= 1;
-                if (s->count == 0) {
-                    s->shiftreg = 0;
-                    s->state = ST_IN;
-                    s->count = 16;
-                }
-            }
-            break;
-        case ST_Z:
-            if (clk) {
-                s->count--;
-                if (s->count == 0) {
-                    s->shiftreg = 0;
-                    s->state = ST_OUT;
-                    s->count = 16;
-                }
-            }
-            break;
-        case ST_IN:
-            /* Indata is sampled at posedge.  */
-            if (clk) {
-                s->count--;
-                s->shiftreg <<= 1;
-                s->shiftreg |= data_in & 1;
-                if (s->count == 0) {
-                    D(printf("%s cfgreg=%x\n", __func__, s->shiftreg));
-                    s->regs[0] = s->shiftreg;
-                    s->state = ST_OUT;
-                    s->count = 16;
-
-                    if ((s->regs[0] & 0xff) == 0) {
-                        /* 25 degrees celcius.  */
-                        s->shiftreg = 0x0b9f;
-                    } else if ((s->regs[0] & 0xff) == 0xff) {
-                        /* Sensor ID, 0x8100 LM70.  */
-                        s->shiftreg = 0x8100;
-                    } else
-                        printf("Invalid tempsens state %x\n", s->regs[0]);
-                }
-            }
-            break;
-    }
-}
-
-
-#define RW_PA_DOUT    0x00
-#define R_PA_DIN      0x01
-#define RW_PA_OE      0x02
-#define RW_PD_DOUT    0x10
-#define R_PD_DIN      0x11
-#define RW_PD_OE      0x12
-
-static struct gpio_state_t
-{
-    MemoryRegion iomem;
-    struct nand_state_t *nand;
-    struct tempsensor_t tempsensor;
-    uint32_t regs[0x5c / 4];
-} gpio_state;
-
-static uint64_t gpio_read(void *opaque, hwaddr addr, unsigned size)
-{
-    struct gpio_state_t *s = opaque;
-    uint32_t r = 0;
-
-    addr >>= 2;
-    switch (addr)
-    {
-        case R_PA_DIN:
-            r = s->regs[RW_PA_DOUT] & s->regs[RW_PA_OE];
-
-            /* Encode pins from the nand.  */
-            r |= s->nand->rdy << 7;
-            break;
-        case R_PD_DIN:
-            r = s->regs[RW_PD_DOUT] & s->regs[RW_PD_OE];
-
-            /* Encode temp sensor pins.  */
-            r |= (!!(s->tempsensor.shiftreg & 0x10000)) << 4;
-            break;
-
-        default:
-            r = s->regs[addr];
-            break;
-    }
-    return r;
-    D(printf("%s %x=%x\n", __func__, addr, r));
-}
-
-static void gpio_write(void *opaque, hwaddr addr, uint64_t value,
-                       unsigned size)
-{
-    struct gpio_state_t *s = opaque;
-    D(printf("%s %x=%x\n", __func__, addr, (unsigned)value));
-
-    addr >>= 2;
-    switch (addr)
-    {
-        case RW_PA_DOUT:
-            /* Decode nand pins.  */
-            s->nand->ale = !!(value & (1 << 6));
-            s->nand->cle = !!(value & (1 << 5));
-            s->nand->ce  = !!(value & (1 << 4));
-
-            s->regs[addr] = value;
-            break;
-
-        case RW_PD_DOUT:
-            /* Temp sensor clk.  */
-            if ((s->regs[addr] ^ value) & 2)
-                tempsensor_clkedge(&s->tempsensor, !!(value & 2),
-                                   !!(value & 16));
-            s->regs[addr] = value;
-            break;
-
-        default:
-            s->regs[addr] = value;
-            break;
-    }
-}
-
-static const MemoryRegionOps gpio_ops = {
-    .read = gpio_read,
-    .write = gpio_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-};
-
-#define INTMEM_SIZE (128 * 1024)
-
-static struct cris_load_info li;
-
-static
-void axisdev88_init(QEMUMachineInitArgs *args)
-{
-    ram_addr_t ram_size = args->ram_size;
-    const char *cpu_model = args->cpu_model;
-    const char *kernel_filename = args->kernel_filename;
-    const char *kernel_cmdline = args->kernel_cmdline;
-    CRISCPU *cpu;
-    CPUCRISState *env;
-    DeviceState *dev;
-    SysBusDevice *s;
-    DriveInfo *nand;
-    qemu_irq irq[30], nmi[2], *cpu_irq;
-    void *etraxfs_dmac;
-    struct etraxfs_dma_client *dma_eth;
-    int i;
-    MemoryRegion *address_space_mem = get_system_memory();
-    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
-    MemoryRegion *phys_intmem = g_new(MemoryRegion, 1);
-
-    /* init CPUs */
-    if (cpu_model == NULL) {
-        cpu_model = "crisv32";
-    }
-    cpu = cpu_cris_init(cpu_model);
-    env = &cpu->env;
-
-    /* allocate RAM */
-    memory_region_init_ram(phys_ram, "axisdev88.ram", ram_size);
-    vmstate_register_ram_global(phys_ram);
-    memory_region_add_subregion(address_space_mem, 0x40000000, phys_ram);
-
-    /* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the 
-       internal memory.  */
-    memory_region_init_ram(phys_intmem, "axisdev88.chipram", INTMEM_SIZE);
-    vmstate_register_ram_global(phys_intmem);
-    memory_region_add_subregion(address_space_mem, 0x38000000, phys_intmem);
-
-      /* Attach a NAND flash to CS1.  */
-    nand = drive_get(IF_MTD, 0, 0);
-    nand_state.nand = nand_init(nand ? nand->bdrv : NULL,
-                                NAND_MFR_STMICRO, 0x39);
-    memory_region_init_io(&nand_state.iomem, &nand_ops, &nand_state,
-                          "nand", 0x05000000);
-    memory_region_add_subregion(address_space_mem, 0x10000000,
-                                &nand_state.iomem);
-
-    gpio_state.nand = &nand_state;
-    memory_region_init_io(&gpio_state.iomem, &gpio_ops, &gpio_state,
-                          "gpio", 0x5c);
-    memory_region_add_subregion(address_space_mem, 0x3001a000,
-                                &gpio_state.iomem);
-
-
-    cpu_irq = cris_pic_init_cpu(env);
-    dev = qdev_create(NULL, "etraxfs,pic");
-    /* FIXME: Is there a proper way to signal vectors to the CPU core?  */
-    qdev_prop_set_ptr(dev, "interrupt_vector", &env->interrupt_vector);
-    qdev_init_nofail(dev);
-    s = SYS_BUS_DEVICE(dev);
-    sysbus_mmio_map(s, 0, 0x3001c000);
-    sysbus_connect_irq(s, 0, cpu_irq[0]);
-    sysbus_connect_irq(s, 1, cpu_irq[1]);
-    for (i = 0; i < 30; i++) {
-        irq[i] = qdev_get_gpio_in(dev, i);
-    }
-    nmi[0] = qdev_get_gpio_in(dev, 30);
-    nmi[1] = qdev_get_gpio_in(dev, 31);
-
-    etraxfs_dmac = etraxfs_dmac_init(0x30000000, 10);
-    for (i = 0; i < 10; i++) {
-        /* On ETRAX, odd numbered channels are inputs.  */
-        etraxfs_dmac_connect(etraxfs_dmac, i, irq + 7 + i, i & 1);
-    }
-
-    /* Add the two ethernet blocks.  */
-    dma_eth = g_malloc0(sizeof dma_eth[0] * 4); /* Allocate 4 channels.  */
-    etraxfs_eth_init(&nd_table[0], 0x30034000, 1, &dma_eth[0], &dma_eth[1]);
-    if (nb_nics > 1) {
-        etraxfs_eth_init(&nd_table[1], 0x30036000, 2, &dma_eth[2], &dma_eth[3]);
-    }
-
-    /* The DMA Connector block is missing, hardwire things for now.  */
-    etraxfs_dmac_connect_client(etraxfs_dmac, 0, &dma_eth[0]);
-    etraxfs_dmac_connect_client(etraxfs_dmac, 1, &dma_eth[1]);
-    if (nb_nics > 1) {
-        etraxfs_dmac_connect_client(etraxfs_dmac, 6, &dma_eth[2]);
-        etraxfs_dmac_connect_client(etraxfs_dmac, 7, &dma_eth[3]);
-    }
-
-    /* 2 timers.  */
-    sysbus_create_varargs("etraxfs,timer", 0x3001e000, irq[0x1b], nmi[1], NULL);
-    sysbus_create_varargs("etraxfs,timer", 0x3005e000, irq[0x1b], nmi[1], NULL);
-
-    for (i = 0; i < 4; i++) {
-        sysbus_create_simple("etraxfs,serial", 0x30026000 + i * 0x2000,
-                             irq[0x14 + i]);
-    }
-
-    if (!kernel_filename) {
-        fprintf(stderr, "Kernel image must be specified\n");
-        exit(1);
-    }
-
-    li.image_filename = kernel_filename;
-    li.cmdline = kernel_cmdline;
-    cris_load_image(cpu, &li);
-}
-
-static QEMUMachine axisdev88_machine = {
-    .name = "axis-dev88",
-    .desc = "AXIS devboard 88",
-    .init = axisdev88_init,
-    .is_default = 1,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static void axisdev88_machine_init(void)
-{
-    qemu_register_machine(&axisdev88_machine);
-}
-
-machine_init(axisdev88_machine_init);