hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 399 deletions

diff --git a/hw/arm_timer.c b/hw/arm_timer.c
deleted file mode 100644
index 644987046a..0000000000
--- a/hw/arm_timer.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * ARM PrimeCell Timer modules.
- *
- * Copyright (c) 2005-2006 CodeSourcery.
- * Written by Paul Brook
- *
- * This code is licensed under the GPL.
- */
-
-#include "hw/sysbus.h"
-#include "qemu/timer.h"
-#include "qemu-common.h"
-#include "hw/qdev.h"
-#include "hw/ptimer.h"
-
-/* Common timer implementation.  */
-
-#define TIMER_CTRL_ONESHOT      (1 << 0)
-#define TIMER_CTRL_32BIT        (1 << 1)
-#define TIMER_CTRL_DIV1         (0 << 2)
-#define TIMER_CTRL_DIV16        (1 << 2)
-#define TIMER_CTRL_DIV256       (2 << 2)
-#define TIMER_CTRL_IE           (1 << 5)
-#define TIMER_CTRL_PERIODIC     (1 << 6)
-#define TIMER_CTRL_ENABLE       (1 << 7)
-
-typedef struct {
-    ptimer_state *timer;
-    uint32_t control;
-    uint32_t limit;
-    int freq;
-    int int_level;
-    qemu_irq irq;
-} arm_timer_state;
-
-/* Check all active timers, and schedule the next timer interrupt.  */
-
-static void arm_timer_update(arm_timer_state *s)
-{
-    /* Update interrupts.  */
-    if (s->int_level && (s->control & TIMER_CTRL_IE)) {
-        qemu_irq_raise(s->irq);
-    } else {
-        qemu_irq_lower(s->irq);
-    }
-}
-
-static uint32_t arm_timer_read(void *opaque, hwaddr offset)
-{
-    arm_timer_state *s = (arm_timer_state *)opaque;
-
-    switch (offset >> 2) {
-    case 0: /* TimerLoad */
-    case 6: /* TimerBGLoad */
-        return s->limit;
-    case 1: /* TimerValue */
-        return ptimer_get_count(s->timer);
-    case 2: /* TimerControl */
-        return s->control;
-    case 4: /* TimerRIS */
-        return s->int_level;
-    case 5: /* TimerMIS */
-        if ((s->control & TIMER_CTRL_IE) == 0)
-            return 0;
-        return s->int_level;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s: Bad offset %x\n", __func__, (int)offset);
-        return 0;
-    }
-}
-
-/* Reset the timer limit after settings have changed.  */
-static void arm_timer_recalibrate(arm_timer_state *s, int reload)
-{
-    uint32_t limit;
-
-    if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) {
-        /* Free running.  */
-        if (s->control & TIMER_CTRL_32BIT)
-            limit = 0xffffffff;
-        else
-            limit = 0xffff;
-    } else {
-          /* Periodic.  */
-          limit = s->limit;
-    }
-    ptimer_set_limit(s->timer, limit, reload);
-}
-
-static void arm_timer_write(void *opaque, hwaddr offset,
-                            uint32_t value)
-{
-    arm_timer_state *s = (arm_timer_state *)opaque;
-    int freq;
-
-    switch (offset >> 2) {
-    case 0: /* TimerLoad */
-        s->limit = value;
-        arm_timer_recalibrate(s, 1);
-        break;
-    case 1: /* TimerValue */
-        /* ??? Linux seems to want to write to this readonly register.
-           Ignore it.  */
-        break;
-    case 2: /* TimerControl */
-        if (s->control & TIMER_CTRL_ENABLE) {
-            /* Pause the timer if it is running.  This may cause some
-               inaccuracy dure to rounding, but avoids a whole lot of other
-               messyness.  */
-            ptimer_stop(s->timer);
-        }
-        s->control = value;
-        freq = s->freq;
-        /* ??? Need to recalculate expiry time after changing divisor.  */
-        switch ((value >> 2) & 3) {
-        case 1: freq >>= 4; break;
-        case 2: freq >>= 8; break;
-        }
-        arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE);
-        ptimer_set_freq(s->timer, freq);
-        if (s->control & TIMER_CTRL_ENABLE) {
-            /* Restart the timer if still enabled.  */
-            ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0);
-        }
-        break;
-    case 3: /* TimerIntClr */
-        s->int_level = 0;
-        break;
-    case 6: /* TimerBGLoad */
-        s->limit = value;
-        arm_timer_recalibrate(s, 0);
-        break;
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s: Bad offset %x\n", __func__, (int)offset);
-    }
-    arm_timer_update(s);
-}
-
-static void arm_timer_tick(void *opaque)
-{
-    arm_timer_state *s = (arm_timer_state *)opaque;
-    s->int_level = 1;
-    arm_timer_update(s);
-}
-
-static const VMStateDescription vmstate_arm_timer = {
-    .name = "arm_timer",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields      = (VMStateField[]) {
-        VMSTATE_UINT32(control, arm_timer_state),
-        VMSTATE_UINT32(limit, arm_timer_state),
-        VMSTATE_INT32(int_level, arm_timer_state),
-        VMSTATE_PTIMER(timer, arm_timer_state),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static arm_timer_state *arm_timer_init(uint32_t freq)
-{
-    arm_timer_state *s;
-    QEMUBH *bh;
-
-    s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state));
-    s->freq = freq;
-    s->control = TIMER_CTRL_IE;
-
-    bh = qemu_bh_new(arm_timer_tick, s);
-    s->timer = ptimer_init(bh);
-    vmstate_register(NULL, -1, &vmstate_arm_timer, s);
-    return s;
-}
-
-/* ARM PrimeCell SP804 dual timer module.
- * Docs at
- * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html
-*/
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    arm_timer_state *timer[2];
-    uint32_t freq0, freq1;
-    int level[2];
-    qemu_irq irq;
-} sp804_state;
-
-static const uint8_t sp804_ids[] = {
-    /* Timer ID */
-    0x04, 0x18, 0x14, 0,
-    /* PrimeCell ID */
-    0xd, 0xf0, 0x05, 0xb1
-};
-
-/* Merge the IRQs from the two component devices.  */
-static void sp804_set_irq(void *opaque, int irq, int level)
-{
-    sp804_state *s = (sp804_state *)opaque;
-
-    s->level[irq] = level;
-    qemu_set_irq(s->irq, s->level[0] || s->level[1]);
-}
-
-static uint64_t sp804_read(void *opaque, hwaddr offset,
-                           unsigned size)
-{
-    sp804_state *s = (sp804_state *)opaque;
-
-    if (offset < 0x20) {
-        return arm_timer_read(s->timer[0], offset);
-    }
-    if (offset < 0x40) {
-        return arm_timer_read(s->timer[1], offset - 0x20);
-    }
-
-    /* TimerPeriphID */
-    if (offset >= 0xfe0 && offset <= 0xffc) {
-        return sp804_ids[(offset - 0xfe0) >> 2];
-    }
-
-    switch (offset) {
-    /* Integration Test control registers, which we won't support */
-    case 0xf00: /* TimerITCR */
-    case 0xf04: /* TimerITOP (strictly write only but..) */
-        qemu_log_mask(LOG_UNIMP,
-                      "%s: integration test registers unimplemented\n",
-                      __func__);
-        return 0;
-    }
-
-    qemu_log_mask(LOG_GUEST_ERROR,
-                  "%s: Bad offset %x\n", __func__, (int)offset);
-    return 0;
-}
-
-static void sp804_write(void *opaque, hwaddr offset,
-                        uint64_t value, unsigned size)
-{
-    sp804_state *s = (sp804_state *)opaque;
-
-    if (offset < 0x20) {
-        arm_timer_write(s->timer[0], offset, value);
-        return;
-    }
-
-    if (offset < 0x40) {
-        arm_timer_write(s->timer[1], offset - 0x20, value);
-        return;
-    }
-
-    /* Technically we could be writing to the Test Registers, but not likely */
-    qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %x\n",
-                  __func__, (int)offset);
-}
-
-static const MemoryRegionOps sp804_ops = {
-    .read = sp804_read,
-    .write = sp804_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static const VMStateDescription vmstate_sp804 = {
-    .name = "sp804",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields      = (VMStateField[]) {
-        VMSTATE_INT32_ARRAY(level, sp804_state, 2),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static int sp804_init(SysBusDevice *dev)
-{
-    sp804_state *s = FROM_SYSBUS(sp804_state, dev);
-    qemu_irq *qi;
-
-    qi = qemu_allocate_irqs(sp804_set_irq, s, 2);
-    sysbus_init_irq(dev, &s->irq);
-    s->timer[0] = arm_timer_init(s->freq0);
-    s->timer[1] = arm_timer_init(s->freq1);
-    s->timer[0]->irq = qi[0];
-    s->timer[1]->irq = qi[1];
-    memory_region_init_io(&s->iomem, &sp804_ops, s, "sp804", 0x1000);
-    sysbus_init_mmio(dev, &s->iomem);
-    vmstate_register(&dev->qdev, -1, &vmstate_sp804, s);
-    return 0;
-}
-
-/* Integrator/CP timer module.  */
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    arm_timer_state *timer[3];
-} icp_pit_state;
-
-static uint64_t icp_pit_read(void *opaque, hwaddr offset,
-                             unsigned size)
-{
-    icp_pit_state *s = (icp_pit_state *)opaque;
-    int n;
-
-    /* ??? Don't know the PrimeCell ID for this device.  */
-    n = offset >> 8;
-    if (n > 2) {
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n);
-    }
-
-    return arm_timer_read(s->timer[n], offset & 0xff);
-}
-
-static void icp_pit_write(void *opaque, hwaddr offset,
-                          uint64_t value, unsigned size)
-{
-    icp_pit_state *s = (icp_pit_state *)opaque;
-    int n;
-
-    n = offset >> 8;
-    if (n > 2) {
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n);
-    }
-
-    arm_timer_write(s->timer[n], offset & 0xff, value);
-}
-
-static const MemoryRegionOps icp_pit_ops = {
-    .read = icp_pit_read,
-    .write = icp_pit_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int icp_pit_init(SysBusDevice *dev)
-{
-    icp_pit_state *s = FROM_SYSBUS(icp_pit_state, dev);
-
-    /* Timer 0 runs at the system clock speed (40MHz).  */
-    s->timer[0] = arm_timer_init(40000000);
-    /* The other two timers run at 1MHz.  */
-    s->timer[1] = arm_timer_init(1000000);
-    s->timer[2] = arm_timer_init(1000000);
-
-    sysbus_init_irq(dev, &s->timer[0]->irq);
-    sysbus_init_irq(dev, &s->timer[1]->irq);
-    sysbus_init_irq(dev, &s->timer[2]->irq);
-
-    memory_region_init_io(&s->iomem, &icp_pit_ops, s, "icp_pit", 0x1000);
-    sysbus_init_mmio(dev, &s->iomem);
-    /* This device has no state to save/restore.  The component timers will
-       save themselves.  */
-    return 0;
-}
-
-static void icp_pit_class_init(ObjectClass *klass, void *data)
-{
-    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
-
-    sdc->init = icp_pit_init;
-}
-
-static const TypeInfo icp_pit_info = {
-    .name          = "integrator_pit",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(icp_pit_state),
-    .class_init    = icp_pit_class_init,
-};
-
-static Property sp804_properties[] = {
-    DEFINE_PROP_UINT32("freq0", sp804_state, freq0, 1000000),
-    DEFINE_PROP_UINT32("freq1", sp804_state, freq1, 1000000),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void sp804_class_init(ObjectClass *klass, void *data)
-{
-    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
-    DeviceClass *k = DEVICE_CLASS(klass);
-
-    sdc->init = sp804_init;
-    k->props = sp804_properties;
-}
-
-static const TypeInfo sp804_info = {
-    .name          = "sp804",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(sp804_state),
-    .class_init    = sp804_class_init,
-};
-
-static void arm_timer_register_types(void)
-{
-    type_register_static(&icp_pit_info);
-    type_register_static(&sp804_info);
-}
-
-type_init(arm_timer_register_types)