hw/armv7m_nvic: Make the NVIC a freestanding class

Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 136 insertions, 0 deletions

diff --git a/hw/arm_gic_internal.h b/hw/arm_gic_internal.h
new file mode 100644
index 0000000000..db4fad564f
--- /dev/null
+++ b/hw/arm_gic_internal.h
@@ -0,0 +1,136 @@
+/*
+ * ARM GIC support - internal interfaces
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_ARM_GIC_INTERNAL_H
+#define QEMU_ARM_GIC_INTERNAL_H
+
+#include "sysbus.h"
+
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GIC_MAXIRQ 1020
+/* First 32 are private to each CPU (SGIs and PPIs). */
+#define GIC_INTERNAL 32
+/* Maximum number of possible CPU interfaces, determined by GIC architecture */
+#define NCPU 8
+
+#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
+
+/* The NVIC has 16 internal vectors.  However these are not exposed
+   through the normal GIC interface.  */
+#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
+
+#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
+#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
+#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
+#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
+#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
+#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
+#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
+#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
+#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
+#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
+#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
+#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
+#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
+#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
+#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
+#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
+#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
+#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
+#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ?            \
+                                    s->priority1[irq][cpu] :            \
+                                    s->priority2[(irq) - GIC_INTERNAL])
+#define GIC_TARGET(irq) s->irq_target[irq]
+
+typedef struct gic_irq_state {
+    /* The enable bits are only banked for per-cpu interrupts.  */
+    unsigned enabled:NCPU;
+    unsigned pending:NCPU;
+    unsigned active:NCPU;
+    unsigned level:NCPU;
+    unsigned model:1; /* 0 = N:N, 1 = 1:N */
+    unsigned trigger:1; /* nonzero = edge triggered.  */
+} gic_irq_state;
+
+typedef struct gic_state {
+    SysBusDevice busdev;
+    qemu_irq parent_irq[NCPU];
+    int enabled;
+    int cpu_enabled[NCPU];
+
+    gic_irq_state irq_state[GIC_MAXIRQ];
+    int irq_target[GIC_MAXIRQ];
+    int priority1[GIC_INTERNAL][NCPU];
+    int priority2[GIC_MAXIRQ - GIC_INTERNAL];
+    int last_active[GIC_MAXIRQ][NCPU];
+
+    int priority_mask[NCPU];
+    int running_irq[NCPU];
+    int running_priority[NCPU];
+    int current_pending[NCPU];
+
+    uint32_t num_cpu;
+
+    MemoryRegion iomem; /* Distributor */
+    /* This is just so we can have an opaque pointer which identifies
+     * both this GIC and which CPU interface we should be accessing.
+     */
+    struct gic_state *backref[NCPU];
+    MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
+    uint32_t num_irq;
+    uint32_t revision;
+} gic_state;
+
+/* The special cases for the revision property: */
+#define REV_11MPCORE 0
+#define REV_NVIC 0xffffffff
+
+void gic_set_pending_private(gic_state *s, int cpu, int irq);
+uint32_t gic_acknowledge_irq(gic_state *s, int cpu);
+void gic_complete_irq(gic_state *s, int cpu, int irq);
+void gic_update(gic_state *s);
+void gic_init_irqs_and_distributor(gic_state *s, int num_irq);
+
+#define TYPE_ARM_GIC_COMMON "arm_gic_common"
+#define ARM_GIC_COMMON(obj) \
+     OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_CLASS(klass) \
+     OBJECT_CLASS_CHECK(ARMGICCommonClass, (klass), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(ARMGICCommonClass, (obj), TYPE_ARM_GIC_COMMON)
+
+typedef struct ARMGICCommonClass {
+    SysBusDeviceClass parent_class;
+} ARMGICCommonClass;
+
+#define TYPE_ARM_GIC "arm_gic"
+#define ARM_GIC(obj) \
+     OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC)
+#define ARM_GIC_CLASS(klass) \
+     OBJECT_CLASS_CHECK(ARMGICClass, (klass), TYPE_ARM_GIC)
+#define ARM_GIC_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(ARMGICClass, (obj), TYPE_ARM_GIC)
+
+typedef struct ARMGICClass {
+    ARMGICCommonClass parent_class;
+    int (*parent_init)(SysBusDevice *dev);
+} ARMGICClass;
+
+#endif /* !QEMU_ARM_GIC_INTERNAL_H */